DCH3-050EU-0005 ARTESYN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

3 Watts

Total Power: 3 Watts Input Voltage: 100 - 254 Vac # of Outputs: Single SPECIAL FEATURES ƒ USB Switching wallmount power supply ƒ Universal AC input ƒ Available in multiple AC plug configurations ƒ CE Mark EMC & LVD, & ErP 2011 for EU versions ƒ Regulated output ƒ Overload and short circuit protection ƒ Constant voltage, constant current ƒ Efficiency Level V ƒ Built in EMI filter (CISPR 22 Class B) ƒ Available in various output connectors ƒ Mini USB 2.0 dc output plug - 0005 ƒ Micro USB 2.0 dc output plug - 0006 SAFETY ƒ UL 60950/6500 ƒ cUL 60950/6500 ƒ TUV 60950 ƒ NEMKO 60950 ƒ CB Certificate and report ƒ CE EMC,LVD & ErP 2011 for EU & UK versions ƒ CTIA ƒ ENEC Electrical Specifications Input Input range: 100 - 240 Vac (wide range) Frequency: 47 - 63 Hz EMI/RFI: FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B & EMC89/336/EEC Safety ground leakage current: 10 μA @ 50/60 Hz, 230 Vac input Output Voltage (Vo): 5 V (4.75 - 5.25 V) Maximum Power (Po): 3 W Hold-up time: 25 ms. typical at full load @ 115 Vac Overvoltage protection: Single fault 10.5 V max. Latching type Overload protection: Output short circuit protection auto recover Overload protected > 800 mA Output: DC cable with Mini USB 2.0 -0005 suffix and Micro USB 2.0 -0006 Connector Pinout: Pin 1: +V Pin 5: ground Data Sheet Environmental Specifications Operating temperature: 0° to 45 °C ambient Storage temperature: -20 °C to +70 °C Electromagnetic susceptibility: Designed to meet EN55082-1 Humidity: Operating; non-condensing 20% to 90% RH Vibration: Per IEC 60068-2-6 DCH3-050EU DCH3-050US DCH3-050UK

Ordering Information

P/P (PARD)1 Connector DCH3-050US-0005 3 W 5 V 0 0.55 A 200 mV Mini USB 2.0 DCH3-050EU-0005 3 W 5 V 0 0.55 A 200 mV Mini USB 2.0 DCH3-050UK-0005 3 W 5 V 0 0.55 A 200 mV Mini USB 2.0 DCH3-050US-0006 3 W 5 V 0 0.55 A 200 mV Micro USB 2.0 DCH3-050EU-0006 3 W 5 V 0 0.55 A 200 mV Micro USB 2.0 DCH3-050UK-0006 3 W 5 V 0 0.55 A 200 mV Micro USB 2.0 1. Peak-to-peak with 20 mHz bandwidth and 10 μF (tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. 2. Output should not be grounded for EMI purpose. 2.44" (62) 1.075" (27.3) .736" (18.1) 2.283" (58) 1.028" (26.1) 59" (1500) DCH3-050US - 0005 & 0006 DCH3-050EU - 0005 & -0006 2.56" (65) .74" (18.8) 2.283" (58) 59" (1500) 1.028" (26.1) 1.06" (27) LASER PRINTED LABEL LASER PRINTED LABEL Mechanical Drawing

2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 Asia (HK) 14/F, Lu Plaza

2 Wing Yip Street

Kwun Tong, Kowloon Hong Kong +852 2176 3333 For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2014 Artesyn Embedded Technologies, Inc. www.artesyn.com DCH3 Series-DS 06.06.14 Mechanical Drawing Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± .02”. 3. Warranty: 2 years DCH3-050UK - 0005 & - 0006 1.79" (45.5) .905" (23) 2.275" (57.8) 59" (1500) 2.016" (51.2) LASER PRINTED LABEL Pin Assignments PIN 1 (Vout) PIN 5 (GROUND)