DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

Relay outputs (Form C) with independent common This product has four channels of relay outputs (Form C) with independent common. Independent common terminal provided per channel, capable of supporting a different external power supply. The rated load is designed to be a high-capacity of 240VAC 6A, 24VDC 5A per channel. * The following ratings need to be satisfied in order to meet CE, ULs requirements. Use the product within these ratings. CE: 240VAC/3A (Resistive), 24VDC/5A (Resistive) UL: 240VAC/6A (Resistive), 24VDC/5A (Resistive) Relay isolation As bus is isolated from the output interfaces by relays, this product has excellent noise performance. Compact design Compact design, 25.2 (W)×94.7(D)×124.8 (H), features flexibility in installation. Adaptable to a temperature range between -20 and +60°C The product is capable of operating in the temperature between -20 and + 60°C. It can be installed in the various environments. Installation easy with two pieces of terminal support and DIN rail You can install and remove a terminal connector without a screwdriver so that it can shorten the time of the replacement. As the product can be not only mounted on DIN rail, but also is removable along the side rails, replacing is simple and easy as well. Equipped with LED for an operation check The product has LED for an operation check, which helps you visually confirm the communication status of each interface. No electrolytic capacitor battery No electrolytic capacitor is used. The Contec is creating the product with a longer life. Specifications Function specifications Item CPS-RRY-4PCC Output Number of output signal channels 4 (Independent common) Output format Relay contacts (Form C) output LED 0 - 3 (Green) Operate time (ON) Within 20ms Release time (OFF) Within 20ms Contact resistance (Initial state) 125mΩ max. Relay contact spec. *1*2 Rated load 240VAC 6A (resistive load), 24VDC 5A (resistive load) Maximum voltage 400VAC, 300VDC Maximum current 6A (AC), 5A (DC) Mechanical life expectancy 10,000,000 operations min or more (Switching times : 300 operations/min) Electrical lifetime 50,000 operations min. (Switching times : 10 operations/min, with rated load) Connector 2 pieces 5.08mm pitch 3-pin terminal Applicable wire AWG28 - 12 LED Status (Green, Red) Supply voltage 24VDC (±10%) Current consumption 0.1A (Max.) Physical dimensions (mm) 25.2(W)×94.7(D)×124.8(H) (No projection included) Weight 250g Installation method Quick mounting on the 35mm DIN rail *1 To meet CEs requirements, the rating should be up to 240VAC/3A (Load resistor), 24VDC/5A (Load resistor). As for ULs requirements, the rating should be up to 240VAC/6A (Load resistor), 24VDC/5A (Load resistor). Use the product within the specified ratings to satisfy these requirements. *2 Refer to the maximum switching capacity listed in the Reference Manual (Hardware) and use the product within the specified voltage and current range. Caution You can set the modules as you desire to the configurable controller up to 16 modules. The total current consumption of the modules should be less than 3.3A.

Ver.1.03 CPS-RRY-4PCC 2 Installation Environment Requirements Item CPS-RRY-4PCC Operating ambient temperature -20 - +60°C Operating ambient humidity 10 - 85%RH (No condensation) Non-operating ambient temperature -20 - +60°C Non-operating ambient humidity 10 - 85%RH (No condensation) Floating dust particles Not to be excessive Corrosive gases None Line-noise resistance Line noise Signal Line /±1kV(IEC61000-4-4 Level 3, EN61000-4-4 Level 3) Static electricity resistance Touch /±4kV(IEC61000-4-2 Level 2, EN61000-4-2 Level 2) Air /±8kV(IEC61000-4-2 Level 3, EN61000-4-2 Level 3) Vibration resistance Sweep resistance 10 - 57Hz *3 /semi-amplitude vibration 0.15mm, 57 - 150Hz/2.0G 40minutes each in X, Y, and Z directions (JIS C60068-2-6-compliant, IEC60068-2-6-compliant) Shock resistance 15G half-sine shock for 11ms in X, Y, and Z directions (JIS C 60068-2-27 –compliant, IEC 60068-2-27 -compliant) Standard VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, Low Voltage Directive, RoHS Directive), UL *3 When you use an optional power product: 10 - 55Hz (See the manual of optional power product for details) Physical Dimensions List of Option Configurable Type Controller CPS-MCS341-DS1-111 Configurable Type CPU module CPS-MCS341-DS1-131 Configurable Type CPU module + OPC UA server + MTConnect CPS-MCS341G-DS1-130 Configurable Type CPU module +3GWAN CPS-MCS341Q-DS1-131 Configurable Type CPU module +920MHz LAN CPS-ECS341-1-011 Ether CAT Slave Module DIN rail mounting power supply CPS-PWD-90AW24-01 DIN rail mounting power supply 90[w] (Input: 100 - 240VAC, output: 24VDC 3.8 A) CPS-PWD-30AW24-01 DIN rail mounting power supply 30[w] Input: 100 - 240VAC, output: 24VDC 1.3 A) Packing List Product [CPS-RRY-4PCC] …1 Product Guide … 1 Warranty Certificate …1 Serial number Label …1 3-pin Connector …4 Component Name No. Name Function 1 Stack Bus Used for power supply and communication with the configurable type module. 2 LED Indicator This indicates status of the product.

3 Relay Output

This is a connector for relay output. (Use the 3-pin connector, included in the package) 25.2 124.8 (14) (18) (14) (18) [mm] STATUS RRY-4PCC NC NO C NC NO C NC NO C NC NO C 94.75.1 2 1 STATUS RRY-4PCC NC NO C NC NO C NC NO C NC NO C