DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
With its compact size, it corresponds to 100BASE-TX in five all ports. This product contains five ports for IEEE802.3u (100BASE-TX)/ IEEE802.3 (10BASE-T) in the compact size (25.2(W) x 94.7(D) x 124.8(H) mm). 2-way power connector and reverse wiring protection within The product supports 2-way power supply. Even when one of the power systems fails during the operation, the product continues functioning. Our safety design supports the product to function even when wires are connected in reverse. Adaptable to a wide range of temperature between -20 and +60°C The product is capable of operating in the temperature between -20 and + 60°C. It can be installed in the various environments. For Auto MDI/MDI-X feature, auto-negotiation feature The Auto MDI/MDI-X feature automatically determines straight or cross cable, avoiding wiring trouble due to wiring mistake. Moreover, auto-recognition function of communication rates (10/100Mbps) and communication methods (half/full duplex) by the auto-negotiation feature. Installation on DIN rail is possible. As the product is mounted on the 35mm DIN rail, removing and replacing are easy as well. Compatible with 12 - 24VDC wide range power It is compatible with 12 - 24VDC wide range power and can be used in various power environment. In addition, An FG terminal is equipped in the power connector. Packing List Unit…1 Setup Guide…1 Acceptable connector…2 Warranty Certificate …1 Serial Number Label…1 *The manual of this product can be downloaded from CONTEC website free of charge (http://www.contec.com/). Optional product POA201-10-2: AC adopter (Input: 90 - 264VAC, Output: 12VDC 1.0A) * Information about the option products, see the Contec’s website. Specifications Specifications Item Specifications Ethernet standards IEEE802.3/IEEE802.3u – compliant Data transfer rate 10Mbps/100Mbps (auto-negotiation) Access method CSMA/CD Communications method All ports: Full/Half duplex (auto-negotiation) Topology Star topology Flow control Full Duplex : IEEE802.3x compliant flow control Half Duplex :Back pressure Number of effective ports 5 Switching method Store and forward Filtering speed 8,130pps(at 10Mbps)/ 148,800pps(at 100Mbps) Forwarding speed 8,130pps(at 10Mbps)/ 148,800pps(at 100Mbps) Address table 1,024 entries Buffer capacity 448Kbits Aging time 300sec (Max.) LED indicator POWER(Green), LINK/ACT (Green), SPEED 10/100M(Yellow-green) Power supply voltage 12V - 24VDC±5% Hybrid supply system *1 Enable Reverse polarity protection Enable FG pin Power supply connector equipped with FG pin Power consumption (Max.) When inputting 12V : 0.04A, When inputting 24V : 0.02A Physical dimensions (mm) 25.2(W)×94.7(D)×124.8(H) (exclusive of protrusions) Material of the case Plastic shell Weight 170g Module installation method Quick mounting onto 35mm DIN rail. *1 The product can function by one of the power connecters. Even when one power turns off during the operation, the product continues functioning. Installation Environment Requirements Item Specifications Operating temperature -20 - 60ºC Storage temperature -20 - 60ºC Humidity 10 - 90%RH (No condensation) Floating dust particles Not to be excessive Corrosive gases None Line-Noise resistance Line-noise AC line/2kV, Signal line/1kV (JIS C61000-4-4Level 3, EN61000-4-4Level 3) Static electricity resistance Contact discharge/4kV (JIS C61000-4-2Level 2, EN61000-4-2Level 2) Atmospheric discharge/8kV (JIS C61000-4-2Level 3, EN61000-4-2Level 3) Vibration resistance Sweep resistance 10 - 57Hz/semi-amplitude 0.15mm,57 - 150Hz/2.0G 40minutes each in X, Y, and Z directions (JIS C60068-2-6-compliant, IEC60068-2-6-compliant) Impact resistance 15G, half-sine shock for 11ms in X, Y, and Z directions (JIS C60068-2-27-compliant, IEC60068-2-27-compliant) Protection IP20 Grounding Class D grounding (previous class 3 grounding) Standard VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive), UL
Ver.1.01 CPS-HBL-8005F 2 External Dimensions Component Name Names of Components and Functions LED Indicators Name Color Content of Display POWER LED Green ON : Power on OFF : Power off SPEED LED Yellow - green ON : Indicates linking by 100Mbps OFF : Indicates linking by 10Mbps or not linked. LINK/ACT LED Green ON : Linking Flashing : indicates data sending/ receiving with connected external devises OFF : No Linking 94.75.1 28.2 124.8 (14) (18) (14) (18) OpenOpen Lock Lock [mm] SPEED LED LINK/ACT LED 10BASE-T/100BASE-TX port Power supply connector POWER LED