DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

This product allows you to install modules from a wide variety of types to suit the needs of the user. * Up to 16 modules can be set and the total current consumption should be less than 3.3A. No base board required As the product requires no base board for installation, it helps add modules easily and smoothly. Installed modules can be removed from any set positions on DIN rail. Compact design Compact design, 44.7(W)×94.7(D)×124.8 (H), features flexibility in installation. Adaptable to a temperature range between -20 and +60°C The product is capable of operating in the temperature between -20 and + 60°C. It can be installed in the various environments. Equipped with LED for an operation check The product has LED for an operation check, which helps you visually confirm the communication status of each interface. No electrolytic capacitor battery No electrolytic capacitor is used. The Contec is creating the product with a longer life. Packing List Product [CPS-ECS341-1-011] …1 End Cover…1 (attached to the product) Product Guide … 1 Warranty Certificate …1 Serial number Label …1 3-pin Connector …1 DIN Rail…1 ※ Use the supplied plastic DIN rail when connecting this product and a module on a desk top for system development or validation. If you use the supplied plastic DIN rail in the field, it cannot be covered by warranty. Therefore, when you set the product and module in the field, use the commercially available DIN rail. External Dimensions List of Option DIN rail mounting power supply CPS-PWD-90AW24-01 DIN rail fitting power supply 90[w] (Input: 100 - 240VAC, output: 24VDC 3.8 A) CPS-PWD-30AW24-01 DIN rail fitting power supply 30[w] (Input: 100 - 240VAC, output: 24VDC 1.3 A) Configurative Device CPS-DIO-0808L with digital input/output (no built-in power supply) CPS-DIO-0808BL with digital input/output (built-in power supply) CPS-DIO-0808RL with digital input/output (current source) CPS-DI-16L with digital input (16ch, current sink) CPS-DI-16RL with digital input (16ch, current source) CPS-DO-16L with digital output (16ch, current sink) CPS-DO-16RL with digital output (16ch, current source) CPS-COM-1PC with RS-232C (contains 1port) CPS-COM-2PC with RS-232C (contains 2 ports) CPS-COM-1PD with RS-422A/485 (1channel) 44.7 94.75.1 [mm] V + V -24VDC CPS-ECS341-1 RUN ERR PWR SD micro LINK ACT IN OUT H L ID RESET LINK ACT

Ver.1.02 CPS-ECS341-1-011 2 CPS-COM-2PD with RS-422A/485 (2 channels) CPS-AI-1608LI with analog input (voltage input 8 channels) CPS-AI-1608LI with analog input (current input 8 channels) CPS-AO-1804LI with analog output (current output 4 channels) CPS-AO-1804LI with analog output (voltage output 4 channels) CPS-CNT-32021 with counter input CPS-RRY-4PCC with Relay output CPS-SSI-4P with temperature sensor input * Visit the Contec website for the latest optional products. Specification Function specification Item CPS- ECS341-1-011 EtherCAT Transmission standard 100BASE-TX The number of channels IN 1 port, OUT 1 port Connector RJ-45 connector LED Act (Yellow), Link (Green) Operating mode FreeRun mode Address Auto increment addressing Process data PDO mapping, SDO Corresponding profile CoE, FoE Maximum numbers of stacking 16 LED Power (Green)/RUN (Green)/Error(Red) Switch Reset SW, Rotary SW Power supply *1 Rated input voltage 24VDC Input voltage range 21.6 - 26.4VDC Power consumption Controller alone: 24V 0.2A (Max.) With module(s): 24V 3.5A (Max.) Connector 2-piece 3.5mm pitch 3-pin terminal (V+, V-, FG) Applicable wire AWG20 - 16 Surge protection element V+ - V-, V- - FG Interactive TVS diode Stand off voltage : ±30V, Peak pulse power : 400W(1msec) Physical dimensions (mm) 44.7(W)×94.7(D)×124.8(H) ( No projection included) Weight 250g Installation method Quick mounting on the 35mm DIN rail *1 Use power cable within 3meters. Installation Environment Requirements Item CPS-ECS341-1-011 Operating ambient temperature -20 - +60°C Operating ambient humidity 10 - 90%RH (No condensation) Non-operating ambient temperature -20 - +60°C Non-operating ambient humidity 10 - 90%RH (No condensation) Floating dust particles Not to be excessive Corrosive gases None Line-noise resistance Line noise AC Line/±2kV *2 Signal Line /±1kV(IEC61000-4-4 Level 3, EN61000-4-4 Level 3) Static electricity resistance Touch /±4kV(IEC61000-4-2 Level 2, EN61000-4-2 Level 2) Air /±8kV(IEC61000-4-2 Level 3, EN61000-4-2 Level 3) Vibration resistance Sweep resistance 10 - 57Hz *3 /semi-amplitude vibration 0.15mm, 57 - 150Hz/2.0G 40minutes each in X, Y, and Z directions (JIS C60068-2-6-compliant, IEC60068-2-6-compliant) Shock resistance 15G half-sine shock for 11ms in X, Y, and Z directions (JIS C 60068-2-27 –compliant, IEC 60068-2-27 -compliant) Grounding Class D grounding (previous class 3 grounding), SG-FG/ non-conduction Standard VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive), UL *2 When the optional power product is used. *3 When the optional power product is used: 10 - 55Hz (See the manual of optional power product for details) Component Name No. Name Function

1 Stack Bus Used for power supply and communication with the configurable type

module. 2 Maintenance Connector Do not use it. 3 Power Connector Use the 3-pin connector, included in the package. 4 LED Indicator This indicates status of the product. 5 Reset Switch This resets the product. 6 Rotary Switch Used for user setup. 7 micro SD Card Slot Do not use this. (maintenance purpose only) 8 EtherCAT This is a port for EtherCAT. 24V DC CPS-ECS341-1 IN OU T H L ID RESET RUN ERR PWR