CD20CDW

CD00CFW TELEDYNE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

SMART] Series CD

4 TELEDYNE

” RELAYS, 2A, 60Vdc Optically Isolated, Short-Circuit Protected A Unit of Teledyne Electronic Technologies DC Solid-State Relay Part* DESC Drawing _ Relay Description Number Number a yy cDoocFW Basic Solid-State Relay (SSR) a Y/ CDOOCFY _90091-008 | cDo1cFW SSR with Control Status | | CDO1CFY 90091-006 CD20CDW SSR with Short-Circuit Protection CD20CDY 90091-004 CD21CDW SSR with Short-Circuit Protection id Control Statt ebercoy —aoogt-oo2 14 Control Status * The Y suffix denotes parameters tested to MIL-PRF-28750 specifications. The W suffix denotes parameters tested to Teledyne specifications. For surface mount (SMT), add “S” prefix to part number. Example: SCDOOCFW ELECTRICAL SPECIFICATIONS (-55°C TO +105°C UNLESS OTHERWISE NOTED) INPUT (CONTROL) SPECIFICATION When used in 2 terminal configuration (TTL or direct control) (See Fig. 1) Min Typ Max Units Input Current @ V,, = 5 Vdc (See Fig. 2) 14. 15 mA Turn-Off Voltage (Guaranteed Off) 15 Vde Turn-On Voltage (Guaranteed On) 3.8 Vde Reverse Voltage Protection -82 Vde Input Supply Range (See Note 4) 3.8 6 Vde INPUT (CONTROL) SPECIFICATION When used in 3 terminal configuration (CMOS or open collector TTL) (See Fig. 1) Min Typ Max Units Control Current Veovrso, = 5 de 250 WA Veoxtno. = 18 Vde 1 mA Control Voltage Range 0 18 Vdc Bias Supply Voltage (See Note 4) 38 6 Vdc Bias Supply Current @ Vj,.,= 5 Ve 1415 mA Turn-Off Voltage (Guaranteed Off) 3.2 Vde Turn-On Voltage (Guaranteed On) 0.3 Vde © 2002 TELEDYNE RELAYS (800) 284-7007 « www.teledynerelays.com cD 41 ep0720001

44 TELEDYNE

A into! een cro Tene Series CD OUTPUT (LOAD) SPECIFICATIONS BLOCK DIAGRAM (BOTTOM VIEW) (See Note 2) Min Typ Max Units BS CONTROL (+) OUTROT ( ) yp OD @ Continuous Load Current (See Fig. 3) a cD20cD 1.0 Adc cp2icD 1.0 Adc Us {Sol tore CDOOCF 2.0 Adc CDO1CF 2.0 Adc ©—@ (8) Leakage Current @ V, ,,. = 60 Vde 40 Adc RETURN NIC (-)0urPuT Output Voltage Drop cb20cD 06 Vde aus cow (ey oUTUT cD21CD 06 Vdc an © CDOOCF 0.75 Vde 7 cD01CF 0.75 Vde 4 [ex coorce cp2ico Continuous Operating Load Voltage 60 Vde | Transient Blocking Voltage (See Note 3) 80 Vde O—M () ON Resistance Rds (on) at T, = 25°C |,y,, = 100 mAdc (See Fig. 4) a PUT ory cD20CD 0.36 0.45 Ohm MECHANICAL SPECIFICATIONS cD21CD 0.36 0.45 Ohm CDOOCF 0.16 0.22 Ohm poten CDOICF 0.16 0.22 Ohm T (sl “4 TELEDYNE Turn-On Time (See Fig. 5) 1.5 ms osrrtgige gigs, 838, “ | om 4 Turn-Off Time (See Fig. 5) 0.25 ms L = Tt; Ts age aT IL cee “TOP NDEX HARK FOR PN Electrical System Spike 2600 Vde ons sosnoceunacronen Output Capacitance at 25 Vdc, 100 KHz 475 pF ce ace Ge us + 28 ey 0.018 = 002 Input to Output Capacitance 10. pF “cg r ro pag ae co et et ele oT Dielectric Strength 1000 Vac [otutend [ aot Insulation Resistance @ 500 Vde 10° Ohm eB, al bid | | Maximum Junction Temperature (T, Max) L pel | OD eumcenoomunomrén «TREMP ONTESERE CD00 150 °C Sco SERIES OUTLINE cpo1 150 °C par fe “| Thermal Resistance Junction to Ambient (0,,) 80 °C T [fsersene) Thermal Resistance Junction to Case (0,.) 20 °CW aes ' LI STATUS OUTPUT SPECIFICATIONS Rus rE ston. “ernoeeinr-m iil peeeterereny (CDO1CF AND CD21CD) Min Typ Max Units ““* enact enna) ed Status Supply Voltage (See Note 7) 30 Vdc (he Soepated aye | 2h err so 10 258) es | cee gen ge Status Leakage Current @ 15 Vde 4 Ade x ==.005 (127) ess) rea“ oris Status (sink) Current (V,. < 0.3 Vde) 2 mAde 02 SERIES OUTLINE cp 42 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2002 TELEDYNE RELAYS coare002.a1

SHORT CIRCUIT SPECIFICATIONS (CD20CD AND cD21CD) Min Typ Max Units Vertus Surge Current (See Fig. 7 and Note 6) 2.4 Adc co “eras 5 ENVIRONMENTAL SPECIFICATIONS \\80 re a MOAD p---—5 Ygug 2 t— | | STAUS =——f Loan |e ‘Bus ans} [+ Ovirut jonny “ye Min Typ Max Units IeonTaou 7 w ont. coorce Temperature Range Yeowtho. ° orzo ~-f | eoaico fi | Operating “55 +105 °C ram” Toor £72557, L----4 Loa Storage $5 #125 °C (A)3 TERMINAL INPUT WITH sTaTUs - (See Note 7) Vibration, 100 g 10 3000 Hz Constant Acceleration 5000 g ens fiom t veer] os __prsorrt O Ee Shock, 0.5 ms 1500 g sontnoe iN yi opener caf | TABLE 1: STATUS OUTPUT TRUTH TABLE [E 5 fs | wre (CDO1CF AND CD21CD) om pe re ce 0c. TL Sere" RETURN Control Voltage Output Status Status Output Level (€)2 TERMINAL INPUT (OPEN COLLECTOR TTL DRIVE) High Off High (Veo = Verarus) Low On Low (V,,) < 0.3 Vde) ve tse a @ “COC Slee aw a gL e-et-F4-| | | ols a 6 if 11 ttt tT | zz, yet | Tt ty (C)2 TERMINAL INPUT (DIRECT DRIVE) 2 ae oS 1018 202580408060 BIAS (INPUT) VOLTAGE \\ eroey INPUT CURRENT VS VOLTAGE Vous ——=— ons pear! OD Le FIGURE 2 (SEE NOTE 4) : Tar, Oe Fae 20 7 teonrRoL Cae fT {TTT Trt yey CORO Son od 8 A S150 HEE (0) 3 TERMINAL INPUT WITHOUT srarus & N

2 CCC “Leno cor maya eo anycut

5 CCP RISRAC SRE STARS Te SS AT AND)

Q | SED20CD- 8 oso LEE eS WIRING CONFIGURATIONS “REET TTT TENT) FIGURE 1 (SEE NOTE 8) ooyy 1 1 PT TTTIY [I 56.15 25 05 45 56 65 75 05 9 105115 125 ANBIENT TEMPERATURE (C) LOAD CURRENT DERATING CURVE FIGURE 3 © 2002 TELEDYNE RELAYS (800) 284-7007 - www.teledynerelays.com cp 43 cowre002a1

tuner sn eto ene Series CD 20 2000 oe ee w_| | | °° 25 50 75 100 125, %o 5 10 15 20 25 30 35 JUNCTION TEMPERATURE (°C) BIAS VOLTAGE (VOLTS) NORMALIZED ON RESISTANCE VS JUNCTION TEMPERATURE SERIES LIMIT BIAS RESISTOR VS BIAS VOLTAGE FIGURE 4 (SEE NOTE 5) FIGURE 8 (SEE NOTE 4) Voonrro. _ —— cn NOTES: PIN2 en = tow 1. Control input is compatible with CMOS or open collector 1 ' TTL (with pull up resistor). Voureur | 1 pac of 2. The rated input voltage is 5V for all tests unless otherwise PIN 45 | \\ fe spectied, it ne ed 3. Transient blocking voltage tests are performed per iol iii MIL-STD-704 (28 Vac systems). iol ns 4, For bias voltages above 6V, a series resistor is required. ro ht Use the standard resistor value equal to or less than the value found from Figure 8. : OUTPUTTURN-ON AND TURN-OFF MING Tose nun ON a oa factor (NR) from Figure 4. Calculate the new ON follows: {CDOOCD, CDOICD) Ry = NF + Fy @ 25 ° (CD20CD, CD21CD) Rey, = 0.2 «NA+ 0.21 TT TTT TTT TIT] & Syetea testing to ne etuiremens of PRF-28780

2 TM ill || [| protection characteristics as deine in his specication,

=¢ Hie ll [| ‘System series inductance for “shorted-load” mode of _ 8, Wma a 7. Astatus pull up resistor is required for proper operation of g int th Determine th t red b eee STS RMR Abie ethene ea TTT TITTIES THF stirs th tthe ice trough te Clerry or ‘0 10 00 t000 status output is 2 mA. Select the status resistor such that “AIP TIME (SECONDS) it does not allow more than 2 mA to flow through the TRIP CURRENT VS TIME ane = Verne 0.3V ans = ans” FIGURE 7 (SEE NOTE 6) 8. Inductive loads should be diode MiptsSesed. Input transitions should be = 1 ms duration and the input drive should be a bounceless contact type. cp 44 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2002 TELEDYNE RELAYS cpor200a.a1