CAT5110SDI-50-GT3

CAT5123 CATALYST | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 16

Technical content

© 2007 by Catalyst Semiconductor, Inc. Characteristics subject to change without notice Doc. No. 220, Rev. E CAT5110, CAT5118, CAT5119 CAT5123, CAT5124, CAT5125 32-Tap MiniPot™ Digitally Programmable Potentiometers with 2-Wire Interface

FeATures

0.3µA ultra-low standby current single-supply operation: 2.7V to 5.5V Glitchless switching between resistor taps Power-on reset to midscale 2-Wire up/down serial interface Resistance values: 10kΩ, 50kΩ and 100kΩ All devices available in sOT-23 package CAT5110, CAT5118, CAT5119 also available in sC70

DesCrIPTIOn

CAT50/58/59/523/5 24/5 25 linear-taper digitally programmable potentiometers perform the same function as a mechanical potentiometer or a variable resistor. These devices consist of a fixed resistor and a wiper contact with 32-tap points that are digitally controlled through a 2-wire up/down serial interface. The CAT5110 and CAT5125 are configured as poten - tiometers. The CAT5118/19/23/24 are configured as variable resistors. Three resistance values are available: 10kΩ, 50kΩ and 100kΩ. All devices are available in space-saving 5-pin and 6-pin SOT-23 packages. The CAT50/58/59 are also available in the SC70 package. PIn COnFIGurATIOn VDD GND CSU/D H 3 4 GND CSU/D HVDD CAT5118 CAT5123 GND CSU/D 6 5 3 4 HVDD VDD 3 4 CAT5110 CAT5125 sOT-23 sOT-23sOT-23 GND CSU/D 6 H 2 L5 CAT5119 CAT51243 4 GND CSU/D HVDD CAT5118 GND CSU/D 6 5HVDD 3 4 CAT5110 sC70 sC70sC70 CAT51193 4 FunCTIOnAl DIAGrAM 32-POSITION DECODER UP-DOWN COUNTER U/D VDD GND H L W CS

APPlICATIOns

Mechanical potentiometer replacement Gain adjustment line impedance matching For Ordering Information details, see page 11.

CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125 2Doc. No. 220, Rev. E © 2007 by Catalyst Semiconductor, Inc. Characteristics subject to change without notice AbsOluTe MAxIMuM rATInGs(1) VDD to GND -0.3V to +6V All Other Pins to GND -0.3V to (VDD + 0.3)V Input and Output Latch-Up Immunity ±200mA Maximum Continuous Current into H, L and W 100kΩ 50kΩ 10kΩ ±0.6mA ±.3mA ±.3mA Continuous Power Dissipation (TA = +70ºC) 5-pin SC70* 6-pin SC70* 247mW 245mW Operating Temperature Range -40°C to +85ºC Junction Temperature +50ºC Storage Temperature Range -65ºC to +50ºC Soldering Temperature (soldering, 0s) +300ºC notes: (1) Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions outside of those listed in the operational sections of this specification is not implied. Exposure to any absolute maximum rating for extended periods may affect device performance and reliability. (*) Derate 3.mW/ºC above TA = +70ºC PIn DesCrIPTIOns Pin number Pin name Description CAT5110/ CAT5125 CAT5118/ CAT5123 CAT5119/ CAT5124 VDD Power Supply 2 2 2 GND Ground 3 3 3 U/D Up/Down Control Input. With CS low, a low-to-high transition increments or decrements the wiper position. 4 4 4 CS Chip Select Input. A high-to-low CS transition determines the mode: increment if U/D is high, or decrement if U/D is low. - - 5 L Low Terminal of Resistor 5 - - W Wiper Terminal of Resistor 6 6 6 H High Terminal of Resistor

CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125 3 Doc No. 220, Rev. E© 2007 by Catalyst Semiconductor, Inc. Characteristics subject to change without notice

eleCTrICAl CHArACTerIsTICs

VDD = 2.7V to 5.5V, V H = V DD, VL = 0, T A = -40ºC to 85ºC. Typical values are at V DD = 2.7V, TA = 25ºC, unless otherwise noted. Parameter symbol Conditions Min Typ Max units DC Performance Resolution 32 Taps End-to-End Resistance (-00) 80 00 20 kΩEnd-to-End Resistance (-50) 40 50 60 End-to-End Resistance (-0) 8 0 2 End-to-End Resistance Tempco TCR 200 ppm/ºC Ratiometric Resistance Tempco 5 ppm/ºC Integral Nonlinearity INL ±0.5 ± LSB Differential Nonlinearity DNL ± LSB Full-Scale Error ±0. LSB Zero-Scale Error LSB Wiper Resistance RW CAT50/8/9 200 600 ΩCAT523/24/25 80 200 Digital Inputs Input High Voltage VIH 0.7 x VDD V Input Low Voltage VIL 0.3 x VDD V Timing Characteristics (Figures 1, 2) U/D Mode to CS Setup tCU 25 ns CS to U/D Step Setup tCI 50 ns CS to U/D Step Hold tIC 25 ns U/D Step Low Period tIL 25 ns U/D Step High Period tIH 25 ns Up/Down Toggle Rate () fTOGGLE MHz Output Settling Time (2) tSETTLE 100kΩ variable resistor configuration, CL = 0pF μs 100kΩ potentiometer configuration, CL = 0pF 0.25 Power supply Supply Voltage VDD 2.7 5.5 V Active Supply Current (3) IDD 25 µA Standby Supply Current (4) ISB VDD = +5V 0.3 µA notes: () Up/Down Toggle Rate: SETTLE TOGGLE t (2) Typical settling times are dependent on end-to-end resistance. (3) Supply current measured while changing wiper tap, fTOGGLE = MHz. (4) Supply current measured while wiper position is fixed.

CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125 4Doc. No. 220, Rev. E © 2007 by Catalyst Semiconductor, Inc. Characteristics subject to change without notice TyPICAl OPerATInG CHArACTerIsTICs TA = 25ºC, unless otherwise noted. VDD = 5.5V VDD = 2.7V 0 5 10 15 20 25 WIPER POSTION 50K RW (Ω) 100 120 140 160 CAT5123/5124/5125 VDD = 2.7V CAT5110/5118/5119 WIPER POSITION

CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125 7 Doc No. 220, Rev. E© 2007 by Catalyst Semiconductor, Inc. Characteristics subject to change without notice Notes: (1) All dimensions are in millimeters. (2) All specifications comply to JEDEC standard M0-203. SC-70 6 LEAD ee b NOM M AX 1.10 0.10 1.00 0.30 0.22 0.46 SYMBOL A b c D E e L θ MIN 0.00 0.80 0.70 0.15 0.08 0.26 2.40 1.38 2.20 — — 1.80 1.15 1.80 D A2 A A1 L GAUGE PLANEc θ 0.36

0.425 REF

0.15 BSC

0.65 BSC

2.10 1.25 2.00 0.90 0.20

PACkAGe InFOrMATIOn

For current Tape and reel information, download the PDF file from: www.catsemi.com/documents/tapeandreel.pdf

CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125 8Doc. No. 220, Rev. E © 2007 by Catalyst Semiconductor, Inc. Characteristics subject to change without notice b D e E1 E θ2 L1 θ L C A Gauge Plane SOT-23 6 LEAD For current Tape and reel information, download the PDF file from: www.catsemi.com/documents/tapeandreel.pdf syMbOl MIn nOM MAx A .45 A 0.00 0.5 A2 0.90 .5 .30 c 0.08 0.22 b 0.30 0.50 e 0.95 BSC D 2.90 BSC E 2.80 BSC E .60 BSC L 0.30 0.45 0.60 L 0.60 REF L2 0.25 BSC θ 0° 8° θ 0° 0° θ2 0° 0° notes: () All dimensions are in millimeters. Angles in degrees. (2) All specifications comply to JEDEC standard MO-178.

CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125 9 Doc No. 220, Rev. E© 2007 by Catalyst Semiconductor, Inc. Characteristics subject to change without notice Notes: (1) All dimensions are in millimeters. Angles in degrees. (2) All specifications comply to JEDEC standard M0-203. SC-70 5 LEAD ee b NOM M AX 1.10 0.10 1.00 0.30 0.18 0.46 SYMBOL A b c D E e L θ MIN 0.00 0.80 0.80 0.15 0.10 0.26 0.36

0.42 REF

2.10 1.25 2.00 1.80 1.15 1.80 2.40 1.35 2.20 D A2 A A1 L GAUGE PLANEc θ For current Tape and reel information, download the PDF file from: www.catsemi.com/documents/tapeandreel.pdf

CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125 0Doc. No. 220, Rev. E © 2007 by Catalyst Semiconductor, Inc. Characteristics subject to change without notice b D e E1 E θ2 L1 θ L C A Gauge Plane SOT-23 5 LEAD For current Tape and reel information, download the PDF file from: www.catsemi.com/documents/tapeandreel.pdf syMbOl MIn nOM MAx A .45 A 0.00 0.5 A2 0.90 .5 .30 c 0.08 0.22 b 0.30 0.50 e 0.95 BSC D 2.90 BSC E 2.80 BSC E .60 BSC L 0.30 0.45 0.60 L 0.60 REF L2 0.25 BSC θ 0° 8° θ 0° 0° θ2 0° 0° notes: () All dimensions are in millimeters. Angles in degrees. (2) All specifications comply to JEDEC standard MO-178.

CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125 Doc No. 220, Rev. E© 2007 by Catalyst Semiconductor, Inc. Characteristics subject to change without notice exAMPle OF OrDerInG InFOrMATIOn Prefix Device # Suffix 5110 SD Product Number Package CAT I T3 Tape & Reel T: Tape & Reel 3: 3000 units/reel 10: 10000 units/reel -10 Resistance -10: 10kohms -50: 50kohms -00: 100kohms Lead Finish G: NiPdAu Blank: Matte-Tin SD: SC70 TB: SOT23 Temperature Range I: Inductrial (-40ºC to +85ºC) 5110 5118 5119 5123 5124 5125 Optional Company ID notes: () All packages are RoHS-compliant (Lead-free, Halogen-free). (2) The device used in the example above is a CAT5110SDI-10 -GT3 (NiPdAu, Tape and Reel). (3) The standard finish for SOT23 package is Matte-Tin. (4) The standard finish for SC70 package is NiPdAu. (5) For additional package and temperature options, please contact your nearest Catalyst Semiconductor Sales office.

CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125 2Doc. No. 220, Rev. E © 2007 by Catalyst Semiconductor, Inc. Characteristics subject to change without notice

OrDerInG InFOrMATIOn

Device Ordering part number Resistor [kΩ] Top Marking Pin package Parts per reel CAT5110 CAT50SDI-0-GT3 0 JU_ SC70-6 3,000 CAT50SDI-0-GT0 0 JU_ SC70-6 0,000 CAT50TBI-0-T3 0 JUYM SOT23-6 3,000 CAT50TBI-0-T0 0 JUYM SOT23-6 0,000 CAT50TBI-0-GT3 0 JUYM SOT23-6 3,000 CAT50TBI-0-GT0 0 JUYM SOT23-6 0,000 CAT50SDI-50-GT3 50 JV_ SC70-6 3,000 CAT50SDI-50-GT0 50 JV_ SC70-6 0,000 CAT50TBI-50-T3 50 JVYM SOT23-6 3,000 CAT50TBI-50-T0 50 JVYM SOT23-6 0,000 CAT50TBI-50-GT3 50 JVYM SOT23-6 3,000 CAT50TBI-50-GT0 50 JVYM SOT23-6 0,000 CAT50SDI-00-GT3 00 JW_ SC70-6 3,000 CAT50SDI-00-GT0 00 JW_ SC70-6 0,000 CAT50TBI-00-T3 00 JWYM SOT23-6 3,000 CAT50TBI-00-T0 00 JWYM SOT23-6 0,000 CAT50TBI-00-GT3 00 JWYM SOT23-6 3,000 CAT50TBI-00-GT0 00 JWYM SOT23-6 0,000 CAT5118 CAT58SDI-0-GT3 0 JL_ SC70-5 3,000 CAT58SDI-0-GT0 0 JL_ SC70-5 0,000 CAT58TBI-0-T3 0 JLYM SOT23-5 3,000 CAT58TBI-0-T0 0 JLYM SOT23-5 0,000 CAT58TBI-0-GT3 0 JLYM SOT23-5 3,000 CAT58TBI-0-GT0 0 JLYM SOT23-5 0,000 CAT58SDI-50-GT3 50 JM_ SC70-5 3,000 CAT58SDI-50-GT0 50 JM_ SC70-5 0,000 CAT58TBI-50-T3 50 JMYM SOT23-5 3,000 CAT58TBI-50-T0 50 JMYM SOT23-5 0,000 CAT58TBI-50-GT3 50 JMYM SOT23-5 3,000 CAT58TBI-50-GT0 50 JMYM SOT23-5 0,000 CAT58SDI-00-GT3 00 JN_ SC70-5 3,000 CAT58SDI-00-GT0 00 JN_ SC70-5 0,000 CAT58TBI-00-T3 00 JNYM SOT23-5 3,000 CAT58TBI-00-T0 00 JNYM SOT23-5 0,000 CAT58TBI-00-GT3 00 JNYM SOT23-5 3,000 CAT58TBI-00-GT0 00 JNYM SOT23-5 0,000

CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125 3 Doc No. 220, Rev. E© 2007 by Catalyst Semiconductor, Inc. Characteristics subject to change without notice OrDerInG InFOrMATIOn (Continued) Device Ordering part number Resistor [kΩ] Top Marking Pin package Parts per reel CAT5119 CAT59SDI-0-GT3 0 JP_ SC70-6 3,000 CAT59SDI-0-GT0 0 JP_ SC70-6 0,000 CAT59TBI-0-T3 0 JPYM SOT23-6 3,000 CAT59TBI-0-T0 0 JPYM SOT23-6 0,000 CAT59TBI-0-GT3 0 JPYM SOT23-6 3,000 CAT59TBI-0-GT0 0 JPYM SOT23-6 0,000 CAT59SDI-50-GT3 50 JR_ SC70-6 3,000 CAT59SDI-50-GT0 50 JR_ SC70-6 0,000 CAT59TBI-50-T3 50 JRYM SOT23-6 3,000 CAT59TBI-50-T0 50 JRYM SOT23-6 0,000 CAT59TBI-50-GT3 50 JRYM SOT23-6 3,000 CAT59TBI-50-GT0 50 JRYM SOT23-6 0,000 CAT59SDI-00-GT3 00 JT_ SC70-6 3,000 CAT59SDI-00-GT0 00 JT_ SC70-6 0,000 CAT59TBI-00-T3 00 JTYM SOT23-6 3,000 CAT59TBI-00-T0 00 JTYM SOT23-6 0,000 CAT59TBI-00-GT3 00 JTYM SOT23-6 3,000 CAT59TBI-00-GT0 00 JTYM SOT23-6 0,000 CAT5123 CAT523TBI-0-T3 0 JLYM SOT23-5 3,000 CAT523TBI-0-T0 0 JLYM SOT23-5 0,000 CAT523TBI-0-GT3 0 JLYM SOT23-5 3,000 CAT523TBI-0-GT0 0 JLYM SOT23-5 0,000 CAT523TBI-50-T3 () 50 JMYM SOT23-5 3,000 CAT523TBI-50-T0 () 50 JMYM SOT23-5 0,000 CAT523TBI-50-GT3 () 50 JMYM SOT23-5 3,000 CAT523TBI-50-GT0 () 50 JMYM SOT23-5 0,000 CAT523TBI-00-T3 () 00 JNYM SOT23-5 3,000 CAT523TBI-00-T0 () 00 JNYM SOT23-5 0,000 CAT523TBI-00-GT3 () 00 JNYM SOT23-5 3,000 CAT523TBI-00-GT0 () 00 JNYM SOT23-5 0,000 notes: () Contact factory for availability.

CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125 4Doc. No. 220, Rev. E © 2007 by Catalyst Semiconductor, Inc. Characteristics subject to change without notice Device Ordering part number Resistor [kΩ] Top Marking Pin package Parts per reel CAT5124 CAT524TBI-0-T3 () 0 JLYM SOT23-5 3,000 CAT524TBI-0-T0 () 0 JLYM SOT23-5 0,000 CAT524TBI-0-GT3 () 0 JLYM SOT23-5 3,000 CAT524TBI-0-GT0 () 0 JLYM SOT23-5 0,000 CAT524TBI-50-T3 50 JMYM SOT23-5 3,000 CAT524TBI-50-T0 50 JMYM SOT23-5 0,000 CAT524TBI-50-GT3 50 JMYM SOT23-5 3,000 CAT524TBI-50-GT0 50 JMYM SOT23-5 0,000 CAT524TBI-00-T3 () 00 JNYM SOT23-5 3,000 CAT524TBI-00-T0 () 00 JNYM SOT23-5 0,000 CAT524TBI-00-GT3 () 00 JNYM SOT23-5 3,000 CAT524TBI-00-GT0 () 00 JNYM SOT23-5 0,000 CAT5125 CAT525TBI-0-T3 0 JUYM SOT23-6 3,000 CAT525TBI-0-T0 0 JUYM SOT23-6 0,000 CAT525TBI-0-GT3 0 JUYM SOT23-6 3,000 CAT525TBI-0-GT0 0 JUYM SOT23-6 0,000 CAT525TBI-50-T3 () 50 JVYM SOT23-6 3,000 CAT525TBI-50-T0 () 50 JVYM SOT23-6 0,000 CAT525TBI-50-GT3 () 50 JVYM SOT23-6 3,000 CAT525TBI-50-GT0 () 50 JVYM SOT23-6 0,000 CAT525TBI-00-T3 () 00 JWYM SOT23-6 3,000 CAT525TBI-00-T0 () 00 JWYM SOT23-6 0,000 CAT525TBI-00-GT3 () 00 JWYM SOT23-6 3,000 CAT525TBI-00-GT0 () 00 JWYM SOT23-6 0,000 OrDerInG InFOrMATIOn (Continued) notes: () Contact factory for availability.

CAT5110, CAT5118, CAT5119, CAT5123, CAT5124, CAT5125 5 Doc No. 220, Rev. E© 2007 by Catalyst Semiconductor, Inc. Characteristics subject to change without notice

reVIsIOn HIsTOry

Date rev. reason 03/0/2004 A Initial Issue 03/8/2004 B Update Typical Operating Characteristics Update SC70 package outline 07/9/2004 C Added SOT-23 package in all areas Update Description Update Electrical Characteristics Update Typical Operating Characteristics Update Functional Description 2/5/2006 D Added CAT523, CAT524, CAT525 Update Features Update Description Update Pin Configuration Update Pin Description Update Electrical Characteristics Update Typical Operating Characteristics Update Functional Description Update Figures 3, 4, 5 and 6 Update Package Information Update Example of Ordering Information Update Ordering information 0/29/07 E Update Electrical Characteristics

Catalyst Semiconductor, Inc. Corporate Headquarters

2975 Stender Way

Santa Clara, CA 95054 Phone: 408.542.000 Fax: 408.542.1200 www.catsemi.com Copyrights, Trademarks and Patents Trademarks and registered trademarks of Catalyst Semiconductor include each of the following: Beyond Memory™, DPP™, EZDim™, MiniPot™, and Quad-Mode™ Catalyst Semiconductor has been issued U.S. and foreign patents and has patent applications pending that protect its products. CATALYST SEMICONDUCTOR MAKES NO WARRANTY, REPRESENTATION OR GUARANTEE, EXPRESS OR IMPLIED, REGARDING THE SUITABILITY OF ITS PRODUCTS FOR ANY PARTICULAR PURPOSE, NOR THAT THE USE OF ITS PRODUCTS WILL NOT INFRINGE ITS INTELLECTUAL PROPERTY RIGHTS OR THE RIGHTS OF THIRD PARTIES WITH RESPECT TO ANY PARTICULAR USE OR APPLICATION AND SPECIFICALLY DISCLAIMS ANY AND ALL LIABILITY ARISING OUT OF ANY SUCH USE OR APPLICATION, INCLUDING BUT NOT LIMITED TO, CONSEQUENTIAL OR INCIDENTAL DAMAGES. Catalyst Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Catalyst Semiconductor product could create a situation where personal injury or death may occur. Catalyst Semiconductor reserves the right to make changes to or discontinue any product or service described herein without notice. Products with data sheets labeled “Advance Information” or “Preliminary” and other products described herein may not be in production or offered for sale. Catalyst Semiconductor advises customers to obtain the current version of the relevant product information before placing orders. Circuit diagrams illustrate typical semiconductor applications and may not be complete. Document No: 220 Revision: E Issue date: 0/29/07