BXB100-24S12FLTJ ARTESYN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Total Power: 66 - 100 W Input Voltage: 18 - 36 V 36 - 75 V # of Outputs: Single SPECIAL FEATURES Industry standard footprint High power density (36.5 W/in3) MTBF >1.4 million hours (Bellcore 332) Input voltage to ETS300-132-2 Adjustable output voltage No minimum load required Separate case ground pin Undervoltage lockout (UVLO) UL, VDE and CSA safety approvals Two year warranty SAFETY VDE0805/EN60950/IEC950 UL1950 CSA C22.2 No. 950 Electric Input Input voltage range 24 Vin nominal
48 Vin nominal
100 mA max. 20 mA max. Input current (max.) (See Note 4) 48 V models 4 A max. @ Io max. and Vin = 0 - 75 V Input reflected ripple (See Note 6) 5 mA pk-pk Active low remote ON/OFF (See Note 7) Logic compatibility ON OFF Open collector ref to -input 1.2 Vdc max. Open circuit Undervoltage lockout
24 Vin: power up
24 Vin: power down
48 Vin: power up
48 Vin: power down
32.5 V Start-up time (See Note 8) Power up Remote ON/OFF 20 ms 20 ms Output Voltage adjustability 60% to 110% Setpoint accuracy ±1.0% Line regulation Low line to high line ±0.5% Load regulation Full load to min. load ±0.10% Minimum load 0% Overshoot At turn on and turn off None Undershoot None Ripple and noise
5 Hz - 20 MHz (See Note 1)
3.3 V and 5 V
2 V and 15 V
75 mV pk-pk, 20 mV rms 100 mV pk-pk, 30 mV rms Temperature co-efficient ±0.01% / °C Transient response (See Note 2) ±2.0% max. deviation; 170 µs recovery to within ±1.0% Remote sense 0.5 Vds transmission line drop compensation Data Sheet
Ordering Information
(Max.) Input Voltage OVP Output Voltage Output Current (Min) Output Current (Max) Efficiency (Typical) Regulation Line Load BXB100-24S12FLTJ 100 W 18 - 36 Vdc 14.5 Vdc 12 V 0 A 8.33 A 85% ±0.05% ±0.1% BXB100-48S05FLTJ 100 W 36 - 75 Vdc 6.5 Vdc 5 V 0 A 20 A 83% ±0.05% ±0.1% BXB100-48S12FLTJ 100 W 36 - 75 Vdc 14.5 Vdc 12 V 0 A 8.33 A 86% ±0.05% ±0.1% General Specifications Efficiency (See Efficiency Table) Insulation voltage Input/Case Input/Output Output/Case
1500 Vdc
Switching frequency Fixed 500 kHz typ. Approvals and standards (See Note 5) VDE0805, EN60950, IEC950 UL1950, CSA C22.2 No. 950 Case material Aluminum baseplate with plastic case Material flammability UL94V-0 Weight 110 g (3.88 oz) MTBF Bellcore 332 MIL-HDBK-217F @ 40 °C C, 100% loaded 1,400,000 hours 580,000 hours min. Environmental Specifications Thermal performance Operating case temperature Non-operating temperature -40 °C to +85 °C -55 °C to +125 °C Altitude Operating Non-operating 10,000 feet max. 40,000 feet max. Vibration 5 - 500 Hz 2.4 G rms (approx.) Protection Short-circuit Continuous, automatic recovery Overvoltage Non-latching Undervoltage Non-latching Thermal 100 °C baseplate, automatic recovery EMC Characteristics Conducted emissions (See Note 3) EN55022 (See Note 3) FCC part 15 EN55022, CISPR22 Level A Level A Level A Telecom Specifications Central office interface A ETS300-132-2 Notes: 1. Measured with 10 μF tantalum capacitor and 1 μF ceramic capacitor across output. Io max. to 0.5 Io max. 3. Units should be characterised within systems. External components required. 4. Input fusing is recommended based on surge current and maximum input current. 5. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 6. Simulated source impedance of 12 μH. 12 μH inductor in series with +Vin. 7. Active high remote on/off option is available (standard product is active low), designate with the suffix ‘FHT’ e.g. BXB100-48S05FHTJ. Consult factory for further details and options. 8. Start-up into resistive load. 9 . “J” suffix designation for RoHS 6/6. External Output Trimming Output can be externally trimmed by using the method shown. TRIM UP TRIM DOWN RT1 OR RT2
For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com www.artesyn.com WORLDWIDE OFFICES Americas 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 Asia (HK) 14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon Hong Kong +852 2176 3333 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2014 Artesyn Embedded Technologies, Inc. BXB100 08Jul2015 Mechanical Dimensions Pin Connections Pin Function 1 +Vin
2 Remote ON/OFF
3 Case
7 Trim
ALL DIMENSIONS IN INCHES (mm) Tolerance : x.xx 0.02in. (0.51mm) x.xxx 0.010in. (0.254mm) VIEW SHOWN PIN SIDE UP 1.90 4 x M3 x 0.5 Through 2.28 (57.91) Max. 0.700 (17.77) 1.000 (25.40) 1.400 (35.56) 2.000 (50.80) 0.400 (10.16) 0.400 (10.16) 1.000 (25.40) 1.400 (35.56) Vo(+) +SEN TRIM -SEN Vo (-) VI(+) ON/OFF CASE VI (-) 0.200 (5.08) Min. Length for all Input and Output Pins 0.500 (12.70) 2.40 (60.96) Max.