BT301 | DigiCamel IC Datasheet

Online Datasheet

Read BT301 online.

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 17

Technical content

500‐4000 MHz High Power Ampliﬁer BT301  OIP3 = 49.0 dBm @ 1900 MHz  Gain = 12.5 dB @ 1900 MHz  Output P1 dB = 30.3 dBm @ 1900 MHz  50 Ω Cascadable  Patented Over Voltage ProtecƟon Circuit  Lead‐free/RoHS‐compliant SOIC 8 SMT package BeRex’s BT301 is a high power and a high dynamic range ampliﬁer in a low cost sur‐ face mount package(SOIC‐8) with a RoHS‐ compliant, that incorporates reliable hetero‐ juncƟon‐bipolar‐transistor (HBT) devices fabricated with InGaP GaAs technology. This device is designed for use where high linearity is required and features high OIP3 and Power with low consumpƟon current (350mA) and requires a few external match‐ ing components such as a DC blocking ca‐ pacitors on the In/Output pin, a bypass ca‐ pacitor and a RF choke for the out port. All devices are 100% RF/DC tested. Product DescripƟon Device Features  Base staƟon Infrastructure/RFID  Commercial/Industrial/Military wireless system ApplicaƟons 1 Device performance _ measured on a BeRex evaluaƟon board at 25°C, 50 Ω system. 2 OIP3 _ measured with two tones at an output of 16 dBm per tone separated by 1 MHz. Typical Performance1 Absolute Maximum RaƟngs BeRex ●website: www.berex.com ● email: sales@berex.com SpeciﬁcaƟons and informaƟon are subject to change and products may be disconƟnued without noƟce. BeRex is a trademark of BeRex. All other trademarks are the property of their respecƟve owners. © 2010 BeRex Parameter Frequency Unit 900 1900 2140 2450 MHz Gain 18.5 12.5 11.5 10.5 dB S11 ‐ 15.0 ‐ 18.0 ‐ 18.0 ‐ 12.0 dB S22 ‐ 7.0 ‐ 12.0 ‐ 12.0 ‐ 11.0 dB OIP32 49.0 49.0 47.0 49.0 dBm Noise Figure 8.5 8.6 7.5 7.5 dB P1dB 29.5 30.3 30.3 30.3 dBm IS‐95C ACPR 22.5 22.5 ‐ ‐ dBm WCDMA ACLR ‐ ‐ 21.0 21.0 dBm Min. Typical Max. Unit Bandwidth 500 4000 MHz IC @ (Vc = 5V) 310 350 390 mA VC 5.0 V RTH 19.6 °C/W Parameter Unit OperaƟng Case Temperature °C Storage Temperature °C JuncƟon Temperature °C OperaƟng Voltage V Input RF Power dBm Supply Current mA RaƟng ‐40 to +85 ‐55 to +155 +220 +6.0 600 *OperaƟon of this device above any of these parameters may result in permanent damage. ApplicaƟon Circuits *external matching circuit: refer to the page 4 to 11. Rev. C *ACPR&ACLR CH Power _ measured at 50dBc. *ACPR Test set‐up: IS‐95 CDMA, 9Ch. FWD, +885KHz oﬀset. *ACLR Test set‐up: 3GPP WCDMA, TM1+64DPCH, +5MHz oﬀset. YY = Year, WW = Work week, XX = Wafer Number

V‐I CharacterisƟcs BeRex SOT89 EvaluaƟon Board *Dielectric constant _ 4.2 *RF paƩern width 52mil *31mil thick FR4 PCB Typical Device Data S‐parameters (Vc=5V, Ic=340mA, T=25°C) 500‐4000 MHz High Power Ampliﬁer BT301 BeRex ●website: www.berex.com ● email: sales@berex.com SpeciﬁcaƟons and informaƟon are subject to change and products may be disconƟnued without noƟce. BeRex is a trademark of BeRex. All other trademarks are the property of their respecƟve owners. © 2010 BeRex Rev. C

500‐4000 MHz High Power Ampliﬁer BT301 S‐Parameter (Vdevice = 5.0V, Icc = 340mA, T = 25 °C, calibrated to device leads) Freq S11 S11 S21 S21 S12 S12 S22 S22 [MHz] [Mag] [Ang] [Mag] [Ang] [Mag] [Ang] [Mag] [Ang] BeRex ●website: www.berex.com ● email: sales@berex.com SpeciﬁcaƟons and informaƟon are subject to change and products may be disconƟnued without noƟce. BeRex is a trademark of BeRex. All other trademarks are the property of their respecƟve owners. © 2010 BeRex Rev. C

ApplicaƟon Circuit: 900 MHz 500‐4000 MHz High Power Ampliﬁer BT301 BeRex ●website: www.berex.com ● email: sales@berex.com SpeciﬁcaƟons and informaƟon are subject to change and products may be disconƟnued without noƟce. BeRex is a trademark of BeRex. All other trademarks are the property of their respecƟve owners. © 2010 BeRex Rev. C SchemaƟc Diagram BOM Tolerance C1 10uF ±20% C2 1.0nF ±5% C3 100pF ±5% C4 3pF ±5% C5 100pF ±5% C6 4.7pF ±5% C7 5.0pF ±5% C8 2.7pF ±5% R1 12ohm ±5% L1 56nH ±5% L2 4.7nH ±5% PCB Diagram NoƟce 1. PCB: 31mil thick FR4 2. Distance between the center of the shunt Induc‐ tor(C6) and the input pin of BT301 _ 5.6 mm. 3. Distance between the center of the shunt cap. (C7) and the output pin of BT301 _ 12 mm. ※ BT301 with both input and output ports opened simultaneously may cause instability. Please See an applicaƟon note or contact company for applicaƟon support.

500‐4000 MHz High Power Ampliﬁer BT301 Typical Performance BeRex ●website: www.berex.com ● email: sales@berex.com SpeciﬁcaƟons and informaƟon are subject to change and products may be disconƟnued without noƟce. BeRex is a trademark of BeRex. All other trademarks are the property of their respecƟve owners. © 2010 BeRex Rev. C

500‐4000 MHz High Power Ampliﬁer BT301 BeRex ●website: www.berex.com ● email: sales@berex.com SpeciﬁcaƟons and informaƟon are subject to change and products may be disconƟnued without noƟce. BeRex is a trademark of BeRex. All other trademarks are the property of their respecƟve owners. © 2010 BeRex Rev. C

500‐4000 MHz High Power Ampliﬁer BT301 ApplicaƟon Circuit: 1900 MHz BeRex ●website: www.berex.com ● email: sales@berex.com SpeciﬁcaƟons and informaƟon are subject to change and products may be disconƟnued without noƟce. BeRex is a trademark of BeRex. All other trademarks are the property of their respecƟve owners. © 2010 BeRex Rev. C PCB Diagram NoƟce 1. PCB: 31mil thick FR4 2. Distance between the center of the series cap. (C8) and the input pin of BT301 _ 1.6 mm. 3. Distance between the center of the shunt cap. (C6) and the input pin of BT301 _ 4.0 mm. 4. Distance between the center of the shunt cap. (C7) and the output pin of BT301 _ 2.5 mm. SchemaƟc Diagram BOM Tolerance C1 10uF ±20% C2 1nF ±5% C3 100pF ±5% C4 100pF ±5% C5 100pF ±5% C6 3pF ±5% C7 2.5pF ±5% C8 2.5pF ±5% R1 12 ohm ±5% L1 56nH ±5% L2 6.8nH ±5%

500‐4000 MHz High Power Ampliﬁer BT301 Typical Performance BeRex ●website: www.berex.com ● email: sales@berex.com SpeciﬁcaƟons and informaƟon are subject to change and products may be disconƟnued without noƟce. BeRex is a trademark of BeRex. All other trademarks are the property of their respecƟve owners. © 2010 BeRex Rev. C

500‐4000 MHz High Power Ampliﬁer BT301 BeRex ●website: www.berex.com ● email: sales@berex.com SpeciﬁcaƟons and informaƟon are subject to change and products may be disconƟnued without noƟce. BeRex is a trademark of BeRex. All other trademarks are the property of their respecƟve owners. © 2010 BeRex Rev. C

ApplicaƟon Circuit: 2140MHz 500‐4000 MHz High Power Ampliﬁer BT301 BeRex ●website: www.berex.com ● email: sales@berex.com SpeciﬁcaƟons and informaƟon are subject to change and products may be disconƟnued without noƟce. BeRex is a trademark of BeRex. All other trademarks are the property of their respecƟve owners. © 2010 BeRex Rev. C SchemaƟc Diagram BOM Tolerance C1 10uF ±20% C2 1nF ±5% C3 100pF ±5% C4 100pF ±5% C5 100pF ±5% C6 2.5pF ±5% C7 1.8pF ±5% C8 1.8pF ±5% C9 5.0pF ±5% L1 56nH ±5% L2 4.7nH ±5% R1 12 ohm ±5% PCB Diagram NoƟce 1. PCB: 31mil thick FR4 2. Distance between the center of the shunt cap. (C8) and the input pin of BT301 _ 1.6 mm. 3. Distance between the center of the shunt cap. (C6) and the input pin of BT301 _ 3.0 mm. 4. Distance between the center of the shunt cap. (C7) and the output pin of BT301 _ 2.5 mm.

500‐4000 MHz High Power Ampliﬁer BT301 Typical Performance BeRex ●website: www.berex.com ● email: sales@berex.com SpeciﬁcaƟons and informaƟon are subject to change and products may be disconƟnued without noƟce. BeRex is a trademark of BeRex. All other trademarks are the property of their respecƟve owners. © 2010 BeRex Rev. C

500‐4000 MHz High Power Ampliﬁer BT301 BeRex ●website: www.berex.com ● email: sales@berex.com SpeciﬁcaƟons and informaƟon are subject to change and products may be disconƟnued without noƟce. BeRex is a trademark of BeRex. All other trademarks are the property of their respecƟve owners. © 2010 BeRex Rev. C

500‐4000 MHz High Power Ampliﬁer BT301 ApplicaƟon Circuit: 2450MHz BeRex ●website: www.berex.com ● email: sales@berex.com SpeciﬁcaƟons and informaƟon are subject to change and products may be disconƟnued without noƟce. BeRex is a trademark of BeRex. All other trademarks are the property of their respecƟve owners. © 2010 BeRex Rev. C SchemaƟc Diagram BOM Tolerance C1 10uF ±20% C2 1nF ±5% C3 100pF ±5% C4 100pF ±5% C5 100pF ±5% C6 1.5pF ±5% C7 1.5pF ±5% C8 1.8pF ±5% R1 12 ohm ±5% L1 56nH ±5% L2 3.9nH ±5% PCB Diagram NoƟce 1. PCB: 31mil thick FR4 2. Distance between the center of the series cap. (C8) and the input pin of BT301 _ 1.6 mm. 3. Distance between the center of the shunt cap. (C6) and the input pin of BT301 _ 3.4 mm. 4. Distance between the center of the shunt cap. (C7) and the output pin of BT301 _ 2.0 mm.

500‐4000 MHz High Power Ampliﬁer BT301 Typical Performance BeRex ●website: www.berex.com ● email: sales@berex.com SpeciﬁcaƟons and informaƟon are subject to change and products may be disconƟnued without noƟce. BeRex is a trademark of BeRex. All other trademarks are the property of their respecƟve owners. © 2010 BeRex Rev. C

500‐4000 MHz High Power Ampliﬁer BT301 BeRex ●website: www.berex.com ● email: sales@berex.com SpeciﬁcaƟons and informaƟon are subject to change and products may be disconƟnued without noƟce. BeRex is a trademark of BeRex. All other trademarks are the property of their respecƟve owners. © 2010 BeRex Rev. C

Suggested PCB Land PaƩern and PAD Layout PCB Land PaƩern PCB MounƟng Note : All dimension are in millimeters PCB lay out _ on BeRex website 500‐4000 MHz High Power Ampliﬁer BT301 Lead plaƟng ﬁnish 100% Tin MaƩe ﬁnish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD RaƟng ESD RaƟng: Value: Test: Standard: MSL RaƟng: Standard: Class 1B Passes <1000V Human Body Model (HBM) JEDEC Standard JESD22‐A114B Level 1 at +265°C convecƟon reﬂow JEDEC Standard J‐STD‐020 NATO CAGE code:

2 N 9 6 F

BeRex ●website: www.berex.com ● email: sales@berex.com SpeciﬁcaƟons and informaƟon are subject to change and products may be disconƟnued without noƟce. BeRex is a trademark of BeRex. All other trademarks are the property of their respecƟve owners. © 2010 BeRex Rev. C

Product Information

BT301 specifications and overview.

Summary

500??000 MHz High Power Amplifier

Description

500??000 MHz High Power Amplifier

Source title BT301_1 Datasheet(PDF) - BeRex Corporation

Related Parts

More parts from the same family.

Browse manufacturer