BT331 | DigiCamel IC Datasheet

Online Datasheet

Read BT331 online.

BT331_1 BEREX | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 20

Technical content

700-2700 MHz 1.5~2.0W Power Amplifier BT331  OIP3 = 51.0 dBm @ 1900 MHz  Gain = 19.5 dB @ 900 MHz  Output P1 dB = 33.3 dBm @ 1900 MHz  50 Ω Cascadable  Highly Reliable InGaP/GaAs HBT Technology  Lead-free/RoHS-compliant SOIC-8 SMT package BeRex’s BT331 is a high power and a high dynamic range amplifier in a low cost sur- face mount package(SOIC-8) with a RoHS- compliant, that incorporates reliable het- erojunction-bipolar-transistor (HBT) de- vices fabricated with InGaP GaAs technol- ogy. This device is designed for use where high linearity is required and features high OIP3 and Power with low consumption current (400mA) and requires a few external matching components such as a DC block- ing capacitors on the In/Output pin, a by- pass capacitor and a RF choke for the out port. Product Description Device Features 1 Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system. 2 OIP3 _ measured with two tones at an output of 20 dBm per tone separated by 1 MHz. Typical Performance1 Absolute Maximum Ratings BeRex ● website: www.berex.com ● email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Parameter Frequency Unit 1900 2140 2450 2600 MHz 900 IS-95C ACPR - - - - dBm 23.3 WCDMA ACLR 23.3 23.4 21.5 21.5 dBm - Min. Typical Max. Unit Bandwidth 700 2700 MHz IC @ (Vc = 5V) 360 410 440 mA VC 5.0 V RTH 10.0 ° C/W Parameter Unit Rating Operating Case Temperature °C -40 to +85 Storage Temperature °C -55 to +155 Junction Temperature °C +220 Operating Voltage V +5.5 Supply Current mA 900 Input RF Power dBm 28 *Operation of this device above any of these parameters may result in permanent damage. Application Circuits *external matching circuit: refer to the page 4 to 16. Rev. C *ACPR CH Power is measured at 55dBc, ACLR CH Power _ measured at 50dBc. *ACPR Test set-up: IS-95 CDMA, 9Ch. FWD, +885KHz offset, PAR 9.7dB at 0.01% Prob. *ACLR Test set-up: 3GPP WCDMA, TM1+64DPCH, +5MHz offset, PAR 10.34 at 0.01% Prob. RF Choke RF In RF Out Vcc BT331 DC Block Bypass DC Block Preliminary Datasheet YY = Year, WW = Work week, XX = Wafer Number  Base station Infrastructure/RFID  Commercial/Industrial/Military wireless system

Applications

V-I Characteristics BeRex SOT89 Evaluation Board *Dielectric constant _ 4.2 *RF pattern width 52mil *31mil thick FR4 PCB Typical Device Data S-parameters (Vc=5V, Ic=400mA, T=25° C) 700-2700 MHz 1.5~2.0W Power Amplifier BT331 Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C

700-2700 1.5~2.0W Power Amplifier BT331 S-Parameter (Vdevice = 5.0V, Icc = 400mA, T = 25 ° C, calibrated to device leads) Freq S11 S11 S21 S21 S12 S12 S22 S22 [MHz] [Mag] [Ang] [Mag] [Ang] [Mag] [Ang] [Mag] [Ang] Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C

Application Circuit: 900 MHz 700-2700 MHz 1.5~2.0W Power Amplifier BT331 Schematic Diagram BOM Toler- ance C1 100pF ±5% 1680 C2 100pF ±5% 1608 C3 100pF ±5% 1608 C4 1nF ±5% 1608 C5 1uF ±5% 1608 C6 10uF ±20% 3216 C7 NC C8 NC C9 1pF ±5% 1608 C10 1608 3.3pF ±5% C11 1608 10pF ±5% C12 1608 8pF ±5% L1 18nH ±5% 1608 L2 1608 8.2nH ±5% R1 4.3KΩ ±5% 1608 R2 100Ω ±5% 1608 PCB Diagram Notice 1. PCB: 31mil thick FR4 2. Distance between the center of the shunt Inductor(L2) and the input pin of BT331 _ 6.45 mm. 3. Distance between the center of the series cap.(C10) and the input pin of BT331 _ 2.8mm. 4. Distance between the center of the shunt cap.(C11) and the input pin of BT331 _ 1.5 mm. 5. Distance between the center of the shunt cap.(C12) and the output pin of BT331 _ 8.25 mm. ※ BT331 with both input and output ports opened simultaneously may cause instabil- ity. Please See an application note or con- tact company for application support. 4 5 Vcc RF_IN RF_OUT C3 C4 C5 C10 C12 C9 R2 C11 Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C

700-2700 MHz 1.5~2.0W Power Amplifier BT331 Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C

Application Circuit: 1900 MHz 700-2700 MHz 1.5~2.0W Power Amplifier BT331 Schematic Diagram BOM Toler- ance C1 100pF ±5% 1608 C2 100pF ±5% 1608 C3 100pF ±5% 1608 C4 1nF ±5% 1608 C5 1uF ±5% 1608 C6 10uF ±20% 3216 C7 NC C8 2pF ±5% 1608 C9 10pF ±5% 1608 C10 1608 3pF ±5% C11 1608 0.5pF ±5% C12 1608 2.7pF ±5% C13 2.5pF ±5% 1608 L1 1608 56nH ±5% R1 4.3KΩ ±5% 1608 R2 100Ω ±5% 1608 PCB Diagram Notice 1. PCB: 31mil thick FR4 2. Distance between the center of the shunt cap.(C13) and the input pin of BT331 _ 5.25 mm. 3. Distance between the center of the series cap.(C10) and the input pin of BT331 _ 2.8mm. 4. Distance between the center of the shunt cap.(C11) and the input pin of BT331 _ 1.5 mm. 5. Distance between the center of the shunt cap.(C12) and the output pin of BT331 _ 2.25 mm. 4 5 Vcc RF_IN RF_OUT C3 C4 C5 C10 C13 C12 C9 R2 C11 Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C

700-2700 MHz 1.5~2.0W Power Amplifier BT331 Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C

Application Circuit: 2140 MHz 700-2700 MHz 1.5~2.0W Power Amplifier BT331 Schematic Diagram BOM Toler- ance C1 100pF ±5% 1608 C2 100pF ±5% 1608 C3 100pF ±5% 1608 C4 1nF ±5% 1608 C5 1uF ±5% 1608 C6 10uF ±20% 3216 C7 NC C8 5pF ±5% 1608 C9 NC C10 1608 1.8pF ±5% C11 1608 0.5pF ±5% C12 1608 2pF ±5% C13 2pF ±5% 1608 L1 1608 22nH ±5% R1 5.6KΩ ±5% 1608 R2 100Ω ±5% 1608 PCB Diagram Notice 1. PCB: 31mil thick FR4 2. Distance between the center of the shunt cap.(C13) and the input pin of BT331 _ 5.25 mm. 3. Distance between the center of the series cap.(C10) and the input pin of BT331 _ 2.8mm. 4. Distance between the center of the shunt cap.(C11) and the input pin of BT331 _ 1.5 mm. 5. Distance between the center of the shunt cap.(C12) and the output pin of BT331 _ 2.25 mm. 4 5 Vcc RF_IN RF_OUT C3 C4 C5 C10 C13 C12 C9 R2 C11 Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C

700-2700 MHz 1.5~2.0W Power Amplifier BT331 Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C

Application Circuit: 2450 MHz 700-2700 MHz 1.5~2.0W Power Amplifier BT331 Schematic Diagram BOM Toler- ance C1 100pF ±5% 1608 C2 100pF ±5% 1608 C3 100pF ±5% 1608 C4 1nF ±5% 1608 C5 1uF ±5% 1608 C6 10uF ±20% 3216 C7 NC C8 NC C9 NC C10 1608 1pF ±5% C11 1608 0.5pF ±5% C12 1608 1.8pF ±5% C13 1pF ±5% 1608 L1 1608 5.7nH ±5% R1 5.6KΩ ±5% 1608 R2 100Ω ±5% 1608 PCB Diagram Notice 1. PCB: 31mil thick FR4 2. Distance between the center of the shunt cap.(C13) and the input pin of BT331 _ 6.0 mm. 3. Distance between the center of the series cap.(C10) and the input pin of BT331 _ 2.8mm. 4. Distance between the center of the shunt cap.(C11) and the input pin of BT331 _ 1.5 mm. 5. Distance between the center of the shunt cap.(C12) and the output pin of BT331 _ 2.5 mm. 4 5 Vcc RF_IN RF_OUT C3 C4 C5 C10 C13 C12 C9 R2 C11 Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C

700-2700 MHz 1.5~2.0W Power Amplifier BT331 Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C

Application Circuit: 2600 MHz 700-2700 MHz 1.5~2.0W Power Amplifier BT331 Schematic Diagram BOM Toler- ance C1 100pF ±5% 1608 C2 100pF ±5% 1608 C3 100pF ±5% 1608 C4 1nF ±5% 1608 C5 1uF ±5% 1608 C6 10uF ±20% 3216 C7 NC C8 5pF ±5% 1608 C9 2.5pF ±5% 1608 C10 1608 1pF ±5% C11 1608 0.5pF ±5% C12 1608 1.8pF ±5% C13 1pF ±5% 1608 L1 1608 5.7nH ±5% R1 5.6KΩ ±5% 1608 R2 100Ω ±5% 1608 PCB Diagram Notice 1. PCB: 31mil thick FR4 2. Distance between the center of the shunt cap.(C13) and the input pin of BT331 _ 5.25 mm. 3. Distance between the center of the series cap.(C10) and the input pin of BT331 _ 2.8mm. 4. Distance between the center of the shunt cap.(C11) and the input pin of BT331 _ 1.5 mm. 5. Distance between the center of the shunt cap.(C12) and the output pin of BT331 _ 1.5 mm. 4 5 Vcc RF_IN RF_OUT C3 C4 C5 C10 C13 C12 C9 R2 C11 Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C

700-2700 MHz 1.5~2.0W Power Amplifier BT331 Preliminary Datasheet BeRex ● website: www.berex.com ● email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C

Suggested PCB Land Pattern and PAD Layout PCB Land Pattern PCB Mounting Note : All dimension are in millimeters PCB lay out _ on BeRex website 700-2700 MHz 1.5~2.0W Power Amplifier BT331 Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating ESD Rating: Value: Test: Standard: MSL Rating: Standard: Class 2 Passes <4000V Human Body Model (HBM) JEDEC Standard JESD22-A114B Level 3 at +265° C convection reflow JEDEC Standard J-STD-020 NATO CAGE code:

2 N 9 6 F

BeRex ● website: www.berex.com ● email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C

Product Information

BT331 specifications and overview.

Summary

700-2700 MHz 1.5~2.0W Power Amplifier

Description

700-2700 MHz 1.5~2.0W Power Amplifier

Source title BT331 Datasheet(PDF) - BeRex Corporation

Related Parts

More parts from the same family.

Browse manufacturer