BT302_18 BEREX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 23
Technical content
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex The BT302 is a high performance and a high dynamic range amplifier in a low cost sur- face mount package(SOT-89) with a RoHS- compliant, that incorporates reliable hetero- junction-bipolar-transistor (HBT) devices fabricated with InGaP/GaAs technology. This device is designed for use where high linearity is required and features high ACLR and P1 performance with low consumption current(215mA) and requires a few external matching components, DC blocking capaci- tors on the In/Output pin and a bypass ca- pacitor and a RF choke for the out port. Product Description Device Features
1 Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω
2 OIP3 _ measured on two tones with a output power 16dBm/ tone , F2—F1 = 1 MHz.. Typical Performance1 Parameter Frequency Unit 915 1960 2140 2400 2600 MHz 3500 Min. Typical Max. Unit Bandwidth 500 4000 MHz Icq @ (Vcc&Vbias=5V) 195 215 235 mA VCC/Vbias 5.0 V RTH 19.5 °C/W Application Circuits *ACLR Channel Power measured at -50dBc. - WCDMA set-up: 3GPP WCDMA, TM1+64DPCH, +5MHz offset, PAR 9.78 at 0.01% Prob.
- Base station /Repeaters Infrastructure/Small Cell
- Commercial/Industrial/Military wireless system
- LTE / WCDMA /CDMA Wireless Infrastructure
Applications
Operating Case Temperature °C -40 to +105 Storage Temperature °C -55 to +155 Junction Temperature °C 220 Operating Voltage V +6.0 Supply Current mA 550 Input RF Power dBm 24 *Operation of this device above any of these parameters may result in permanent damage. - LTE set-up: 3GPP LTE, FDD E-TM3.1, 20MHz BW, ±5MHz offset, PAR 9.75 @0.01% Prob. *External matching circuit: Refer to application circuit for each frequency.
- +5V/215mA at operating bias condition
- Gain = 16.0 dB @ 2400MHz
- P1dB = 29.5 dBm @ 2400MHz
- OIP3 = 42.1dBm 16dBm/tone at 2400MHz
- LTE 20M ACLR = 19.1dBm Output Power at -50dBc @ 2400MHz
- Lead-free/Green/RoHS-compliant SOT89 SMT package
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex V-I Characteristics Typical Device Data S-parameters (Vc=5V, Ic=215mA, T=25°C)
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex S-Parameter (Vdevice = 5.0V, Ic = 215mA, T = 25 °C, calibrated to device leads) Freq S11 S11 S21 S21 S12 S12 S22 S22 [MHz] [Mag] [Ang] [Mag] [Ang] [Mag] [Ang] [Mag] [Ang]
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Application Circuit: 915 MHz Schematic Diagram BOM Remark C1 10uF 1206 C2 1nF 0603 C3 100pF 0603 C4 100pF 0603 C5 100pF 0603 C6 6pF 0603 C7 4.7pF 0603 L1 0805 39nH Coil L2 2.7nH 0603 L3 0603 2.7nH U1 BT302 SOT89 Note: 1. Distance between the edge of the series cap(C6) and the input pin of BT302 - 1.7mm. 2. Distance between the edge of the shunt ind(L3) and the input pin of BT302 - 5.0mm. 3. Distance between the edge of the series ind(L2) and the output pin of BT302 - 3.3mm. 4. Distance between the edge of the shunt cap(C7) and the output pin of BT302 - 5.6mm. C3 C2 C1 RFin RFout Vcc Figure about the reference position of components
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Vc = 5V, Ic = 215mA Typical Performance
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex 3GPP WCDMA 1FA ACLR (–50dBc) 3GPP LTE TM3.1 20MHz ACLR (–50dBc) Vc = 5V, Ic = 215mA Typical Performance
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Application Circuit: 1960 MHz Schematic Diagram BOM Remark C1 1206 10uF C2 0603 1nF C3 0603 100pF C4 0603 100pF C5 0603 100pF C6 0603 2.7pF C7 0603 3.5pF C8 0603 2pF L1 0805 27nH Coil U1 SOT89 BT302 Note: 1. Distance between the edge of the series cap(C6) and the input pin of BT302 - 1.7mm. 2. Distance between the edge of the shunt ind(C7) and the input pin of BT302 - 5.0mm. 3. Distance between the edge of the shunt cap(C8) and the output pin of BT302 - 3.6mm. Figure about the reference position of components C3 C2 C1 RFin RFout Vcc C8C7
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Vc = 5V, Ic = 215mA Typical Performance
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex 3GPP WCDMA 1FA ACLR (–50dBc) 3GPP LTE TM3.1 20MHz ACLR (–50dBc) Vc = 5V, Ic = 215mA Typical Performance
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Application Circuit: 2140 MHz Schematic Diagram BOM Remark C1 1206 10uF C2 0603 1nF C3 0603 100pF C4 0603 100pF C5 0603 100pF C6 0603 2pF C7 0603 2.5pF C8 0805 1.5pF L1 0603 20nH Coil U1 SOT89 BT302 Note: 1. Distance between the edge of the series cap(C6) and the input pin of BT302 - 1.7mm. 2. Distance between the edge of the shunt ind(C7) and the input pin of BT302 - 5.6mm. 3. Distance between the edge of the shunt cap(C8) and the output pin of BT302 - 3.3mm. Figure about the reference position of components C3 C2 C1 RFin RFout Vcc C8C7
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Vc = 5V, Ic = 215mA Typical Performance
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex 3GPP WCDMA 1FA ACLR (–50dBc) 3GPP LTE TM3.1 20MHz ACLR (–50dBc) Vc = 5V, Ic = 215mA Typical Performance
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Application Circuit: 2400 MHz Schematic Diagram BOM Remark C1 1206 10uF C2 0603 1nF C3 0603 100pF C4 0603 100pF C5 0603 100pF C6 0603 1.5pF C7 0603 2.2pF C8 0603 1.2pF L1 0805 18nH Coil U1 SOT89 BT302 Note: 1. Distance between the edge of the series cap(C6) and the input pin of BT302 - 1.7mm. 2. Distance between the edge of the shunt ind(C7) and the input pin of BT302 - 4.5mm. 3. Distance between the edge of the shunt cap(C8) and the output pin of BT302 - 3.0mm. Figure about the reference position of components C3 C2 C1 RFin RFout Vcc C8C7
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Vc = 5V, Ic = 215mA Typical Performance
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex 3GPP WCDMA 1FA ACLR (–50dBc) 3GPP LTE TM3.1 20MHz ACLR (–50dBc) Vc = 5V, Ic = 215mA Typical Performance
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Application Circuit: 2600 MHz Schematic Diagram BOM Remark C1 10uF 1206 C2 1nF 0603 C3 100pF 0603 C4 100pF 0603 C5 100pF 0603 C6 1.2pF 0603 C7 2pF 0603 C8 1.2pF 0603 L1 0805 12nH Coil U1 BT302 SOT89 Note: 1. Distance between the edge of the series cap(C6) and the input pin of BT302 - 1.7mm. 2. Distance between the edge of the shunt ind(C7) and the input pin of BT302 - 3.6mm. 3. Distance between the edge of the shunt cap(C8) and the output pin of BT302 - 0.8mm. Figure about the reference position of components C3 C2 C1 RFin RFout Vcc C8C7
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Vc = 5V, Ic = 215mA Typical Performance
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex 3GPP WCDMA 1FA ACLR (–50dBc) 3GPP LTE TM3.1 20MHz ACLR (–50dBc) Vc = 5V, Ic = 215mA Typical Performance
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Application Circuit: 3500 MHz Schematic Diagram BOM Remark C1 10uF 1206 C2 1nF 0603 C3 100pF 0603 C4 100pF 0603 C5 100pF 0603 C6 0.3pF 0603 C7 0.5pF 0603 C8 0.75pF 0603 L1 0805 18nH Coil U1 BT302 SOT89 Note: 1. Distance between the edge of the series cap(C6) and the input pin of BT302 - 1.7mm. 2. Distance between the edge of the shunt cap(C7) and the input pin of BT302 - 6.7mm. 3. Distance between the edge of the shunt cap(C8) and the output pin of BT302 - 0.4mm. Figure about the reference position of components C3 C2 C1 RFin RFout Vcc C8C7
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Vc = 5V, Ic = 215mA Typical Performance
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex 3GPP WCDMA 1FA ACLR (–50dBc) 3GPP LTE TM3.1 20MHz ACLR (–50dBc) Vc = 5V, Ic = 215mA Typical Performance
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex PCB Land Pattern PCB Mounting Note : All dimension _ millimeters PCB lay out _ on BeRex website
0.5-4.0 GHz 1W High Power Amplifier BT302 Rev. B BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating ESD Rating: Value: Test: Standard: MSL Rating: Standard: Class 1C Passes <2000V Human Body Model (HBM) JEDEC Standard JESD22-A114B Level 1 at +265°C convection reflow JEDEC Standard J-STD-020 NATO CAGE code:
2 N 9 6 F
Tape & Reel SOT89 Packaging information: Tape Width (mm): 12 Reel Size (inches): 7 Device Cavity Pitch (mm): 8 Devices Per Reel: 1000 Package Marking YY = Year, WW = Working Week, XX = Wafer No.