BSW6321 BEREX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 13
Technical content
Ver. 2.1 BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex 5MHz-6000MHz High Linearity Reflective SPDT RF switch BSW6321 Electrical Specifications - 50Ω Typical conditions are at VDD = 3.3V, T A = 25°C, V1 Low = 0V, V1 High = 3.3V, Z L = 50Ω, Excluding SMA Connector and PCB loss, unless other- wise noted. Table 1 Electrical Specifications - 50Ω Parameter Path Condition Min Typ Max Unit Operating Frequency 5 6000 MHz Insertion Loss ANT - Tx ANT - Rx 13.56MHz 1GHz 2GHz 2.45GHz 3GHz 4GHz 5GHz 5.75GHz 6GHz 0.34 0.42 0.48 0.50 0.58 0.60 0.73 0.75 0.80 dB Isolation ANT - Tx ANT - Rx 13.56MHz 1GHz 2GHz 2.45GHz 3GHz 4GHz 5GHz 5.75GHz 6GHz dB Isolation Tx - Rx Rx - Tx 13.56MHz 1GHz 2GHz 2.45GHz 3GHz 4GHz 5GHz 5.75GHz 6GHz dB Return Loss ANT, Tx, Rx 5MHz – 6GHz (Active port) 20 dB Input P1dB ANT - Tx 2.45GHz 5.75GHz 39 dBm ANT - Rx 2.45GHz 5.75GHz 38 * Tone Power is 18dBm and Tone spacing is 20KHz. ** DC transient test at RF all ports (ANT,Tx,Rx) when V1 is switched from High to Low or from Low to High in a 50Ω setup.
Ver. 2.1 BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex 5MHz-6000MHz High Linearity Reflective SPDT RF switch BSW6321 Electrical Specifications - 50Ω Typical conditions are at VDD = 3.3V, T A = 25°C, V1 Low = 0V, V1 High = 3.3V, Z L = 50Ω, Excluding SMA Connector and PCB loss, unless other- wise noted. Table 2 Electrical Specifications - 50Ω Parameter Path Condition Min Typ Max Unit Input IP3* ANT - Tx 2.45GHz 5.75GHz 63 dBm ANT - Rx 2.45GHz 5.75GHz 56 Input IP2* ANT - Tx 2.45GHz 5.75GHz 98 105 dBm ANT - Rx 2.45GHz 5.75GHz 90 115 2nd Harmonic ANT - Tx 2.45GHz 5.75GHz 85 dBc ANT - Rx 2.45GHz 5.75GHz 80 105 3rd Harmonic ANT - Tx 2.45GHz 5.75GHz 100 108 dBc ANT - Rx 2.45GHz 5.75GHz 85 108 Video Feedthrough** 5ns rise-time pulse 15 mVpp Switching Time ANT - Tx ANT - Rx 50% control to 90% RF 50% control to 10% RF 500 400 ns * Tone Power is 18dBm and Tone spacing is 20KHz. ** DC transient test at RF all ports (ANT,Tx,Rx) when V1 is switched from High to Low or from Low to High in a 50Ω setup.
Ver. 2.1 BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex 5MHz-6000MHz High Linearity Reflective SPDT RF switch BSW6321 Electrical Specifications - 75Ω Typical conditions are at VDD = 3.3V, T A = 25°C, V1 Low = 0V, V1 High = 3.3V, Z L = 75Ω, Excluding SMA Connector and PCB loss, unless other- wise noted. Table 3 Electrical Specifications - 75Ω Parameter Path Condition Min Typ Max Unit Operating Frequency 1 6000 MHz Insertion Loss RFC - RFx 5MHz 204MHz 1218MHz 1700MHz 1794MHz 0.25 0.29 0.45 0.39 0.36 dB Isolation RFC to RFx 5MHz 204MHz 612MHz 1218MHz 1794MHz dB Isolation RFx to RFx 5MHz 204MHz 612MHz 1218MHz 1794MHz dB Return Loss RFC, RFx 5MHz – 3GHz (Active port) 15 20 dB Input P1dB RFC - RFx 50Ω Impedance @2140MHz 33 dBm Input IP3* (note) RFC - RFx 633MHz (Pin=18dBm/tone) 72 dBm Input IP2* (note) RFC – RFx 633MHz (Pin=18dBm/tone) 110 dBm 2nd Harmonic RFC – RFx 633MHz (Pin=25dBm) 111 dBc 3rd Harmonic RFC – RFx 633MHz (Pin=25dBm) 120 dBc Video Feedthrough** 5ns rise-time pulse 15 mVpp Switching Time RFC – RFx 50% control to 90% RF 50% control to 10% RF 500 400 ns * Tone spacing is 20KHz. ** DC transient test at RF all ports (RFC, RF1, RF2) when V1 is switched from High to Low or from Low to High in a 75Ω setup.
Ver. 2.1 BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex 5MHz-6000MHz High Linearity Reflective SPDT RF switch BSW6321 Product Description Figure 3 Functional Block Diagram Table 4 Pin Descriptions No. Pin Name Descriptions 1 V1 Digital Control Logic Input. 2 ANT (RFC) ANT RF port (RFC). 3 VDD Supply Voltage. 4 Rx (RF2) Rx RF port (RF2).
5 GND Ground
6 Tx (RF1) Tx RF port (RF1). Pad Exposed Pad Ground Table 6 Operating Ranges Parameter Symbol Min Typ Max Unit Supply Voltage VDD 2.7 3.3 5.5 V Supply Current IDD - 140 - μA Digital Input Control (V1) V1 High 1.0 - 3.3 V V1 Low 0 - 0.7 V Operating Temperature Range To -40 +25 +105 °C Table 7 Absolute Maximum Ratings Parameter Symbol Min Max Unit Supply Voltage VDD -0.3 5.5 V Digital Input Voltage (V1) V1 -0.3 3.6 V Maximum Input Power - - 41 dBm Storage Temperature range - -65 +150 °C ESD HBM All pins - - 2500 V CDM All pins - - 1000 V Table 5 V1 Control Truth Table V1 ANT-Tx ANT-Rx
0 OFF ON
1 ON OFF
Ver. 2.1 BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex 5MHz-6000MHz High Linearity Reflective SPDT RF switch BSW6321 ANT (RFC) Tx (RF1) Rx (RF2) VDD GND Evaluation Board - 50Ω Figure 20 Evaluation Board Layout - 50Ω V1 J2 9V1_IN VDD_IN 100pF 1uF VDD Figure 21 Evaluation Board Schematic - 50Ω Figure 22 Evaluation Board PCB Layer Information 50Ω COPPER : 1oz (0.035mm), Top Layer COPPER : 1oz (0.035mm), Inner Layer COPPER : 1oz (0.035mm), Bottom Layer RO4003C / 0.305mm FR-4 / 0.36mm FINISH THICKNESS : 1.55T FR-4 / 0.73mm COPPER : 1oz (0.035mm), Inner Layer FR-4 Er : 4.5~4.8 RO4003C Er : 3.38 FR-4 Er : 4.5~4.8 Table 8 Bill of Material - Evaluation Board 50Ω No. Ref Des Part Qty Part Number Remark
1 C2 1 CAP 1608 1uF J 50V
2 C4 1 CAP 1608 100pF J 50V
3 C5* 1 CAP 1005 100pF J 50V
4 C6 1 CAP 1005 DNI
5 R2 1 RES 1608 J 0ohm
6 U1 1 3 Pin Header
7 J2 1 10 Pin Header
8 ANT, Tx, Rx 3 SMA_END_LAUNCH
9 U2 1 1.5X1.5_6L_ BSW6321 ANT VDD Tx GND Rx VDD ANT Rx Tx DNI 100pF * C5 should be placed near the device.
Ver. 2.1 BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex 5MHz-6000MHz High Linearity Reflective SPDT RF switch BSW6321 Evaluation Board - 75Ω Figure 23 Evaluation Board Layout - 75Ω Figure 24 Evaluation Board Schematic - 75Ω Figure 25 Evaluation Board PCB Layer Information 75Ω 1uF C4J2 VDD_IN VDD 1uF C2J3 V1_IN V1 COPPER : 1oz (0.035mm), Top Layer COPPER : 1oz (0.035mm), Inner Layer COPPER : 1oz (0.035mm), Bottom Layer FR-4 / 0.58mm FR-4 / 0.3mm FINISH THICKNESS :1.6T FR-4 / 0.58mm COPPER : 1oz (0.035mm), Inner Layer FR-4 Er : 4.5~4.8 FR-4 Er : 4.5~4.8 FR-4 Er : 4.5~4.8 Table 9 Bill of Material - Evaluation Board 75Ω RF1RF2 RFC Ref Line VDD V1 GND No. Ref Des Part Qty Part Number Remark
1 C2,C4 2 CAP 0603 1uF 50V
2 C1,C3 2 CAP 0402 DNI
3 RFC,RF1,RF2 3 F Type_END_LAUNCH
4 J2,J3 2 2 Pin Header
5 U2 1 DFN 1.5X1.5_6L_ BSW6321 RFC VDD RF1 GND RF2 VDD RFC RF2 RF1 DNI DNI SMA1 SMA3 SMA2
Ver. 2.1 BeRex ●website: www.berex.com ●email: sales@berex.com Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark o f BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex 5MHz-6000MHz High Linearity Reflective SPDT RF switch BSW6321 Tape & Reel NATO CAGE code:
2 N 9 6 F
S : Switch 2 : The number of switch throw B : Sequential Number Y : Year WW : Work Week Figure 28 Package Marking Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating ESD Rating: Class 2 Value: Passes < 2500V Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114B MSL Rating: Level 1 at +265°C convection reflow Standard: JEDEC Standard J-STD-020 Packaging information : Tape Width (mm) : 8 Reel Size (inches) : 7 Device Cavity Pitch (mm) : 4 Device Per Reel : 3000EA 4.00±0.10 2.00±0.05 8.00±0.30 1.74±0.05 1.74±0.05 0.25±0.05 0.75±0.05