AVP2034

AVP2034 TELEDYNE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

D IM ENSIO NS A R E IN INC H ES [M ILLIM ETER S] SPECIFICATIONS * INTERM ODULATION PERFORM ANCE ABSOLUTE M AXIM UM RATINGS 650-691-98 00 • Fax: 650-962-68 4 5 • U pdates: w w w.teledynem icrow ave.com • m icrow ave@ teledyne.com R ev. 1/12 AVP2034 Typical Values AVP2 034 Sm all H erm etic Package, C ougar G aN PakB G uaranteed Param eter Typical 0 to 5 0 °C -5 5 to +85 °C Frequency (M in.) 5 00-2 400 M H z 600-2 2 00 M H z 600-2 2 00 M H z Typical @ 2 5 °C AVP2 034 1 If no load or a short on output; decrease input pow er by +10 dB m . 2 Therm al resistance is based on total pow er dissipation. * M easured in a 50-ohm system at +12/+28 V. ^ Faster sw itching speed option available upon request. Sm all Signal G ain (M in.) 4 0.0 dB 39.0 dB 38 .0 dB G ain Flatness (M ax.) ±0.8 dB ±1.0 dB ±1.2 dB N oise Figure (M ax.) 3.7 dB 4 .6 dB 5.0 dB SW R (M ax.) Input/O utput <1.8 :1 2.0:1 2.0:1 Pow er O utput (M in.) @ 4 dB com p. +4 4 .0 dB m +4 3.5 dB m +4 3.0 dB m R everse Isolation 7 0.0 dB 65.0 dB 65.0 dB D C C urrent (M ax.) 1st Stg: +12V 200 m A 215 m A 230 m A Linear O per. 2nd Stg: +28 V 1200 m A 1500 m A 1600 m A Psat w /+8 dB m Input 2nd Stage: +28 V 3200 m A 3500 m A 37 00 m A Sw itching Speed (M ax.) 2 m s 4 m s 5 m s 50% TTL to 90% R ise tim e or 10% Fall Tim e^

600 TO 2200 M Hz, 20 W ATTS

HIGH POW ER GaNPak B AM PLIFIER CougarG aNPak B AVP2034 The AVP2034 am plifier provides nom inal output pow er of 20-22 W atts. Each am plifier uses control circuitry to ensure safe startup and autom atic therm al shutdow n and recovery. The am plifiers have an external pin for TTL on/off control. O n/O ff Low or H igh can be specified; standard is O ff/Low. The AVP2034 uses the pream p and driver stages to provide ~ 4 0 dB of overall gain. H eat sinking is required to keep the case tem peratures w ithin a safe operating range. A thin layer of therm al grease or H iTherm (for exam ple the H T-2500 series) helps provide a low resistance therm al path betw een the case and the m ounting surface. The m ounting surface should be m etal w ith heat conduction of alum inum or better. H eat sink size depends on w hether fan-driven air cooling is used, or if only convection is used. M axim um Tj of both am plifiers is 200°C . H E AT SIN K W A R N IN G : This am plifier requires an adequate heat sink to prevent dam age. M axim um case tem perature m ust not be exceeded. The package is designed to provide ade - quate heat transfer to proper alum inum heat sink.

650-691-98 00 • Fax: 650-962-68 4 5 • U pdates: w w w.teledynem icrow ave.com • m icrow ave@ teledyne.com AVP2034 GAIN - dB Gain vs Supply Voltage Vcc = 24/28/32 FREQUENCY - MHz GAIN - dB Gain vs Temperature FREQUENCY - MHz 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 KEY: +25 °C +85 °C -55 °C (unless otherwise noted) 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 25°C @ 24V 25°C @ 28V 25°C @ 32V NOISE FIGURE - dB Noise Figure FREQUENCY - MHz FREQUENCY - MHz FREQUENCY - MHz 100 IP2 - dBm Second Order Intercept Point IP3 - dBm Third Order Intercept Point 2nd Harmonics - dBm Second Order Harmonics 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 OUTPUT POWER = +23 dBm/EACH TONE 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 OUTPUT POWER = +23 dBm/EACH TONE FREQUENCY - MHz 100 40 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 OUTPUT POWER = +23 dBm/EACH TONE GAIN - dB Gain vs Time Vcc = 15/32 FREQUENCY - MHz 4.1 4.0 3.9 3.8 3.7 3.6 3.5 NOISE FIGURE - dB FREQUENCY - MHz Life Test Data @ +85°C Case Temperature Noise Figure vs Time Vcc = 15/32 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 Pre-Life Post Life - 1000 Hr Burn-in Pre-Life Post Life - 1000 Hr Burn-in D ata C om ing Soon D ata C om ing Soon

650-691-98 00 • Fax: 650-962-68 4 5 • U pdates: w w w.teledynem icrow ave.com • m icrow ave@ teledyne.com TYPICAL PERFORM ANCE AVP2034 (cont.) OUTPUT POWER - dBm Power Output at 4 dB Compression F R E Q U E N C Y - M H z 4 7 4 5 4 3 4 1 3 9 3 7 3 5 3 3 3 1 2 9 2 7 2 5 2 3 OUTPUT POWER - dBm Pin Vs. Pout at 600 MHz I N P U T P O W E R - d B m -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 COMPRESSION - dB - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 1 0 - 1 1 - 1 2 K E Y : + 2 5 ° C + 8 5 ° C - 5 5 ° C ( u n le s s o th e r w is e n o te d ) 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 P o u t + 2 5 °C P o u t + 8 5 °C P o u t - 5 5 °C C o m p r e s s + 2 5 °C C o m p r e s s + 8 5 °C C o m p r e s s - 5 5 °C 4 7 4 5 4 3 4 1 3 9 3 7 3 5 3 3 3 1 2 9 2 7 2 5 2 3 OUTPUT POWER - dBm Pin Vs. Pout at 1000 MHz I N P U T P O W E R - d B m -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 COMPRESSION - dB - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 1 0 - 1 1 - 1 2 P o u t + 2 5 °C P o u t + 8 5 °C P o u t - 5 5 °C C o m p r e s s + 2 5 °C C o m p r e s s + 8 5 °C C o m p r e s s - 5 5 °C 4 7 4 5 4 3 4 1 3 9 3 7 3 5 3 3 3 1 2 9 2 7 2 5 2 3 OUTPUT POWER - dBm Pin Vs. Pout at 1400 MHz I N P U T P O W E R - d B m -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 COMPRESSION - dB - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 1 0 - 1 1 - 1 2 P o u t + 2 5 °C P o u t + 8 5 °C P o u t - 5 5 °C C o m p r e s s + 2 5 °C C o m p r e s s + 8 5 °C C o m p r e s s - 5 5 °C OUTPUT POWER - dBm Pin Vs. Pout at 1800 MHz I N P U T P O W E R - d B m -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 COMPRESSION - dB - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 1 0 - 1 1 - 1 2 P o u t + 2 5 °C P o u t + 8 5 °C P o u t - 5 5 °C C o m p r e s s + 2 5 °C C o m p r e s s + 8 5 °C C o m p r e s s - 5 5 °C 4 7 4 5 4 3 4 1 3 9 3 7 3 5 3 3 3 1 2 9 2 7 2 5 2 3 OUTPUT POWER - dBm Pin Vs. Pout at 2000 MHz I N P U T P O W E R - d B m -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 COMPRESSION - dB - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 1 0 - 1 1 - 1 2 P o u t + 2 5 °C P o u t + 8 5 °C P o u t - 5 5 °C C o m p r e s s + 2 5 °C C o m p r e s s + 8 5 °C C o m p r e s s - 5 5 °C 4 7 4 5 4 3 4 1 3 9 3 7 3 5 3 3 3 1 2 9 2 7 2 5 2 3 OUTPUT POWER - dBm Pin Vs. Pout at 2200 MHz I N P U T P O W E R - d B m -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 COMPRESSION - dB - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 1 0 - 1 1 - 1 2 P o u t + 2 5 °C P o u t + 8 5 °C P o u t - 5 5 °C C o m p r e s s + 2 5 °C C o m p r e s s + 8 5 °C C o m p r e s s - 5 5 °C 4 7 4 5 4 3 4 1 3 9 3 7 3 5 3 3 3 1 2 9 2 7 2 5 2 3 OUTPUT POWER - dBm Pin Vs. Pout at 2400 MHz I N P U T P O W E R - d B m -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 COMPRESSION - dB - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 1 0 - 1 1 - 1 2 P o u t + 2 5 °C P o u t + 8 5 °C P o u t - 5 5 °C C o m p r e s s + 2 5 °C C o m p r e s s + 8 5 °C C o m p r e s s - 5 5 °C

650-691-98 00 • Fax: 650-962-68 4 5 • U pdates: w w w.teledynem icrow ave.com • m icrow ave@ teledyne.com TYPICAL PERFORM ANCE TYPICAL AUTOM ATIC TEST DATA AVP2034 (cont.) LINEAR S-PARAM ETERS M odel: AVP2034 Vcc=+ 1 2V / + 28V Tem p = + 25 °C FREQ . S1 1 S21 S1 2 S22 M Hz M AG ANG M AG ANG M AG ANG M AG ANG . LINEAR S-PARAM ETERS M odel: AVP2034 Vcc=+ 1 2V / + 28V Tem p = + 85 °C FREQ . S1 1 S21 S1 2 S22 M Hz M AG ANG M AG ANG M AG ANG M AG ANG . LINEAR S-PARAM ETERS M odel: AVP2034 Vcc=+ 1 2V / + 28V Tem p = –55 °C FREQ . S1 1 S21 S1 2 S22 M Hz M AG ANG M AG ANG M AG ANG M AG ANG . INPUT VSWR Input VSWR vs Frequency 2.0 1.8 1.6 1.4 1.2 1.0 FREQUENCY - MHz PAE% PAE (%) Vcc = 12/28 PAE% PAE (%) Vcc = 12/28 POWER IN - dBm -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8

1800 MHz

2000 MHz

2200 MHz

2400 MHz

-16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 POWER IN - dBm

600 MHz

1000 MHz

1400 MHz

2.0 1.8 1.6 1.4 1.2 1.0 FREQUENCY - MHz KEY: +25 °C +85 °C -55 °C (unless otherwise noted) 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400

650-691-98 00 • Fax: 650-962-68 4 5 • U pdates: w w w.teledynem icrow ave.com • m icrow ave@ teledyne.com AVP2034 (cont.) OUTLINE DRAW ING - COUGAR GaNPak B MOUNTING HOLES, □0.096 [2.43] THRU, 19PL MOUNTING SURFACE PRODUCT LABEL AREA RF IN RF OUT TTL +28V GND RF CONNECTOR SMA JACK, (FEMALE) 2PL .670 [17.02] .40 [10.0] .20 [5.1] .25 [6.4] 2PL .100 [2.54] .755 [19.18] 1.360 [34.54] 1.965 [49.91] 1.885 [47.88] 2.650 [67.31] .32 [8.1] 2PL Ø .03 [.7], 2PL .60 [15.2] 1.04 [26.5] 1.53 [38.9] 2.750 [69.85] .825 [20.96] 1.285 [32.64] .100 [2.54] .19 [4.7] .745 [18.92] 1.595 [40.51] 2.250 [57.15] 2.900 [73.66] 3.000 [76.20] .980 [24.89] 1.745 [44.32] 1.17 [29.7] .72 [18.4] .19 [4.7] 0.19 [4.7] .19 [4.7] 1.141 [28.97] .620 [15.75] 1.105 [28.07] +12/ 15V .40 [10.0] .40 [10.2]