AVE600 ARTESYN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
600 Watts
Total Power: 600 Watts Input Voltage: 36 - 75 V # of Outputs: Single SPECIAL FEATURES 2:1 Wide input range Optimised for high density, small space applications Low ripple and noise Fixed switching frequency Super high efficiency High capacitive load capability Basic insulation system Aluminium substrate design SAFETY UL, cUL: UL60950 TUV/CE: IEC/EN60950 Electrical Specifications Input Input ra nge: 36 - 75 VDC Efficiency2: 95.6% Output Voltage tolerance: +/-1% Line regulation: ±0.33% Load regulation: ±0.2% Noise/ripple: 200 mV Over voltage protection: Hiccup: Auto-restart Over temperature protection: Auto-restart Switching frequency: 140 kHz Temperature coefficient: ±0.02/°C Isolation I/O isolation: 1500 VDC min. Data Sheet Environmental Specifications Operating ambient temperature range: -40 °C to +85 °C Storage temperature: -55 °C to +125 °C Humidity: 5% to 95% (non-condensing) MTBF: 1.5 Million hours RoHS Compliant
Ordering Information
Model number Input voltage Output voltage Power AVE600-48S12B-4L 36 - 75 Vin 12 V @ 50 A 600 W - Standard version is negative enable - “-L” = Rohs6 compliance - “-4” = 4.8mm pin length - “-B” = Baseplate Mechanical Drawings 4-M3 15.24 [0.600] 35.56 [1.400] 50.8 [2.000] 61.0[2.402] 15.24 [0.600] 35.56 [1.400] 50.8 [2.000] 48.26 [1.900] 57.9 [2.280] L 12.7 [0.500] Base plate Bottom view 4-ø4 ± 0.1 Side view Load board Unit: mm[inch] Bottom view: pin on upside
2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 Asia (HK) 14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon Hong Kong +852 2176 3333 For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com www.artesyn.com While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective Notes: 1. All specifications are subject to change without notice. Mechanical drawings are for reference only. 2. Warranty: 2 years 3. Label and logo appearance may vary from what is shown on mechanical drawings. Pin Length Option Device code suffix L -4 4.8mm ± 0.5mm -6 3.8mm ±0.5mm -8 2.8mm ± 0.5mm None 5.8mm ± 0.5mm Pin Designations Pin No. Name Function