AVE300-48S1V2-4 ARTESYN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

198 Watts

Total Power: 198 Watts Input Voltage: 36 - 75 V # of Outputs: Single Special featureS ƒ 2:1 Wide input range ƒ Optimised for high density, small space applications ƒ Low ripple and noise ƒ Fixed switching frequency ƒ Super high efficiency ƒ High capacitive load capability ƒ Basic insulation system ƒ Aluminium Substrate design Safety ƒ UL, cUL: UL60950 ƒ TUV/CE: IEC/EN60950 "7&47# Electrical Specifications Input Input ra nge: 36 - 75 VDC Efficiency2: 92% Output Voltage tolerance: +/-1% Line regulation: 5 mV Load regulation: 10 mV Noise/ripple: 1.2 Vo,1.5 Vo, 1.8 Vo = 75 mV 2.5 Vo = 100 mV, 3.3 Vo = 150 mV Over voltage protection: Hiccup: Auto-restart Over temperature protection: Auto-restart Switching frequency: 220 kHz - 280 kHz Temperature coefficient: ±0.02/°C Isolation I/O isolation: 1500 VDC min. Data Sheet Environmental Specifications Operating ambient temperature range: -40 °C to +85 °C Storage temperature: -55 °C to +125 °C Humidity: 5% to 95% (non-condensing) MTBF: 2 Million hours RoHS Compliant

Ordering Information

Model number Input voltage Output voltage Power AVE300-48S1V2-4 36 - 75 Vin 1.2 V @ 60 A 72 W AVE300-48S1V2B-4 36 - 75 Vin 1.2 V @ 60 A 72 W AVE300-48S1V2P-4 36 - 75 Vin 1.2 V @ 60 A 72 W AVE300-48S1V2PB-4 36 - 75 Vin 1.2 V @ 60 A 72 W AVE300-48S1V5B-4 36 - 75 Vin 1.5 V @ 60 A 90 W AVE300-48S1V8B-4 36 - 75 Vin 1.8 V @ 60 A 108 W AVE300-48S2V5-4 36 - 75 Vin 2.5 V @ 60 A 150 W AVE300-48S2V5B-4 36 - 75 Vin 2.5 V @ 60 A 150 W AVE300-48S2V5P-4 36 - 75 Vin 2.5 V @ 60 A 150 W AVE300-48S2V5PB-4 36 - 75 Vin 2.5 V @ 60 A 150 W AVE300-48S3V3B-4 36 - 75 Vin 3.3 V @ 60 A 198 W AVE300-48S3V3B-6 36 - 75 Vin 3.3 V @ 60 A 198 W - Standard version is negative enable - “-6” = 3.8 mm pin length -“-4” = 4.8 mm pin length “-L” =Rohs6 compliance “-P”= Positive enable “-B” = Baseplate Mechanical Drawings 5.8mm+/-0.5mm 2.8mm+0.5/-0.3mm NONE 4.8mm+/-0.5mm 3.8mm+/-0.5mm Device Code Suf/f_ix Pin Length Option L 9.5(0.37) 15.24 [0.600] 25.40 [1.001] 2.0 TOLERANCES: X.Xmm=+/-0.5mm X.XXmm=+/-0.25mm TOP VIEW 2-ø2.0 +0.05 -0.10 7-ø1.0± 0.10 4-M3 57.9 [2.28] 48.26 [1.901] 50.80 [2.002] 35.56 [1.401] 15.24 [0.600] 61.0 [2.40] 50.80 [2.002] 35.56 [1.401] 5.8mm+/-0.5mm 2.8mm+0.5/-0.3mm NONE 4.8mm+/-0.5mm 3.8mm+/-0.5mm Device Code Suf/f_ix Pin Length Option L 9.5(0.37) 15.24 [0.600] 25.40 [1.001] 2.0 TOLERANCES: X.Xmm=+/-0.5mm X.XXmm=+/-0.25mm TOP VIEW 2- 2.0 +0.05 -0.10 7- 1.0±0.10 4-M3 57.9 [2.28] 48.26 [1.901] 50.80 [2.002] 35.56 [1.401] 15.24 [0.600] 61.0 [2.40] 50.80 [2.002] 35.56 [1.401] With no base plate:

2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 europe (uK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 asia (HK) 14/F, Lu Plaza

2 Wing Yip Street

Kwun Tong, Kowloon Hong Kong +852 2176 3333 For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com www.artesyn.com While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective Notes: Un-dimensioned components are for visual reference only. Pin Designations Pin No. Function P1 Vin(+) P2 CNT P3 NC P4 Vi(-) P5 Vo(+) P6 NC P7 +Sense P8 Trim P9 -Sense P10 NC P11 Vo(-) Mechanical Drawings With base plate: 5.8mm+/-0.5mm 2.8mm+0.5/-0.3mm NONE 4.8mm+/-0.5mm 3.8mm+/-0.5mm Device Code Suf/f_ix Pin Length Option L 15.24 [0.600] 25.40 [1.001] TOLERANCES: X.Xmm=+/-0.5mm X.XXmm=+/-0.25mm TOP VIEW 2-ø2.0 +0.05 -0.10 7-ø1.0± 0.10 4-M3 57.9 [2.28] 48.26 [1.901] 50.80 [2.002] 35.56 [1.401] 15.24 [0.600] 61.0 [2.40] 50.80 [2.002] 35.56 [1.401] 12.7(0.5) 2.0 5.8mm+/-0.5mm 2.8mm+0.5/-0.3mm NONE 4.8mm+/-0.5mm 3.8mm+/-0.5mm Device Code Suf/f_ix Pin Length Option L 15.24 [0.600] 25.40 [1.001] TOLERANCES: X.Xmm=+/-0.5mm X.XXmm=+/-0.25mm TOP VIEW 2- 2.0 +0.05 -0.10 7- 1.0±0.10 4-M3 57.9 [2.28] 48.26 [1.901] 50.80 [2.002] 35.56 [1.401] 15.24 [0.600] 61.0 [2.40] 50.80 [2.002] 35.56 [1.401] 12.7(0.5) 2.0