DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

This product has 16 sample/hold amplifiers. These sample/hold amplifiers hold analog input signals simultaneously on 16 channels. The signals are captured when the amplifiers receive a control signal from the analog E series board. This product samples signals on 16 channels simultaneous. Easy connection with an external signal according to the M3 terminal block This product has terminal blocks (M3 screw type) for connecting analog input signals. It also has terminals (M3 screw type) for connecting analog output signals from analog E series board. These terminal blocks enable easy wire connection to the external equipment. Furthermore, there is an extension connector, which enables the connection with an optional BNC connector terminal (ATP-16) etc. Others - Easy to connect with the analog E series board through an optional calbe (PCB37PS-0.5P). - Either PC power (via CN1) or an external power source can be used to supply power to this product. - This product can be installed on the DIN rail using the optional DIN rail installation adapter (DIN-ADP1). About The Analog E Series This manual uses the generic term "analog E series" to represent the following 12 products. Board for PCI Express AIO-121601E3-PE, AIO-161601E3-PE, AIO-121601UE-PE, AIO-161601UE- PE Board for PCI AD12-16(PCI)EV, AD16-16(PCI)EV, AD12-16U(PCI)EV, AD16-16U(PCI)EV, AD12-16(PCI)E, AD16-16(PCI)E, AD12-16U(PCI)EH, AD16-16U(PCI)EH Board for ISA AD12-16(PC)EH, AD16-16(PC)EH, AD12-16U(PC)EH, AD16-16U(PC)EH Specifications Basic Specifications Parameter Specification Input range Unisolated -10V - +10V Number of input channels 16ch Accuracy *1 ±0.025% of FSR Current consumption (Max.) 1600mA Operating conditions Temperature : 0 - 50 C Humidity : 10 - 90%RH (No condensation) External dimensions (mm) 105(W) x 230 (D) x 25.5 (H) Weight 350g Supported board Board for PCI Express AIO-121601E3-PE, AIO-161601E3-PE, AIO-121601UE-PE, AIO-161601UE-PE Board for PCI AD12-16(PCI)EV, AD16-16(PCI)EV, AD12-16U(PCI)EV, AD16-16U(PCI)EV, AD12-16(PCI)E, AD16-16(PCI)E, AD12-16U(PCI)EH, AD16-16U(PCI)EH Board for ISA AD12-16(PC)EH, AD16-16(PC)EH, AD12-16U(PC)EH, AD16-16U(PC)EH *1 : For ambient temperatures of 0 C, 50 C, a full scale range error of 0.1% may occur. The error can be minimized by adjusting the board at the temperature at which it is to be used. Sample/hold Amp. Parameter Specification Acquisition time 1.5µsec Settling time 350nsec Aperture time 25nsec Aperture uncertainty 0.3nsec Output Droop rate 0.5µV/µsec Input Impedance 1MΩ or more (when power is on) Output Impedance 1Ω or more (when power is on) Terminal (CN2 - CN5) Specifications Interface Connector (CN1, CN6) Specifications Used connector 37-pin D-SUB connector [F (female) type] DC-37ST-N [mfd. by JAE] equivalent Lock nut Screw size #4-40UNC GM-25HU [mfd. by HONDA] equivalent Compatible connector 37-pin D-SUB connector [M (male) type] (DCSP-JB37PF [mfd. by JAE] equivalent), (17JE-23370-02(D8C) [mfd. by JEI] equivalent), etc Connection Example 1 Connection Example 2ATSS-16A PCB37PS-0.5 Connect ATSS-16A directly to an external equipment through its screw type terminal block. External device PC or I/O expansion unit ATSS-16A PCB37PS-0.5 Connect ATSS-16A to an external equipment through the BNC connector which connects the ATSS-16A and the ATP-16. ATP-16 PC or I/O expansion unit External device Used terminal 5.6 11.1 15.8 3.2 7.62 6.2 Compatible Y pin C3A [mfd. by J.S.T.] equivalent Pin screw M3 ML-40S1BYF [mfd. by Sato Parts] equivalent Terminal block dimension [mm] Y pin dimension [mm]

Ver.1.01 ATSS-16A 2 Packing List Accessory Board [ATSS-16A] …1 User’s Manual (this booklet) …1 Cable & Connector (Option) Shielded Cable with Two 37-pin D-SUB Connectors (Mold Type) : PCB37PS-0.5P (0.5m), PCB37PS-1.5P (1.5m) Accessories (Option) Termination Panel with BNC connectors for Analog I/O Boards : ATP-16E *1 General Purpose Terminal : DTP-3C *1 Screw Terminal : DTP-4C *1 Screw Terminal (M3 x 37P) : EPD-37A *1 Screw Terminal (M3.5 x 37P) : EPD-37 *1 DIN rail adapter : DIN-ADP1 *1 PCB37PS optional cable is required separately. * Check the CONTEC’s Web site for more information on these options. External dimensions Differences between ATSS-16 and ATSS-16A The ATSS-16A is not upper compatible with the ATSS-16. The ATSS-16A is different in specification, depending on the board number as listed below. The differences in specification are listed below. Parameter ATSS-16 Specification ATSS-16A Specification*1 [Board No.: No.7357] ATSS-16A Specification*2 [Board No.: No.7357A] Accuracy (For ambient temperatures of 0ºC, 50ºC) 0.5% 0.1% 0.1% Current consumption (Max.) +5VDC 1500mA +5VDC 1600mA +5VDC 1600mA External power supply requirement +5V - +6VDC +5V - +9VDC +5V - +9VDC AGND and GND signals connection The AGND and GND signals are connected to the board internally. The AGND and GND signals are not connected to the board internally. The AGND and GND signals are connected to the board internally. *1: It is a specification of the board that has been described at the right of board name. [ATSS-16A] as “No.7357” *2: It is a specification of the board that has been described at the right of board name. [ATSS-16A] as “No.7357A” 8 - φ3.5 ANALOG OUTPUT 105 727 LED1 CN1 AD ABROAD JP1 1 2 3 CN2 CN3 EXTERNAL POWER GND VCC AGND CH0 VR1VR2VR3VR4VR5VR6VR7 VR9VR10VR11VR12VR13VR14VR15VR16 VR8 230 AGND CH0AGND CH1AGND CH2AGND CH3AGND CH4AGND CH5AGND CH6AGND CH7 AGND CH8AGND CH9AGND CH10AGND CH11AGND CH12AGND CH13AGND CH14AGND CH15 ANALOG INPUT ANALOG INPUT CN4 CN5 CN6 EXPANTION

277 CONTEC ATSS-16A

[mm] 14.5 25.5