ATBA-32F, ATBA-8F
Document overview
- Manufacturer or author: CONTEC
- PDF pages: 2
Technical content
Features
Buffered by high speed high accuracy amplifiers This terminal has equipped high response speed high accuracy amplifiers, the inputted analog signals can be truthfully transferred to our analog input board/card. And because of the high input impedance of buffer amplifiers, the influence applied to the output impedance of signal source can be limited to a very low level. Crosstalk Prevention These products are used to prevent the crosstalk while analog signals of low response speed sources are being inputted to the analog input board/card. Compact designing With its compact designing, you can carry it easily after simply removed the connection cables. Aluminum Dustproof Cover-Box The cover-box is lightly designed by using aluminum in consideration of portability. Packing List Termination Panel [ATBA-32F or ATBA-8F]…1 Power supply connector (MC1,5/3-ST-3,5)…1 User’s Manual…1 Warranty Certificate …1 Signal name Label Sheet…1 Specifications Specifications Item ATBA-32F ATBA-8F Analog Input (Buffer Amplifier Part) Insulated specification Unisolated Absolute max. input voltage ±15V Number of Input Channels *1 Single-Ended Input: 32ch or Differential Input: 16ch Single-Ended Input: 8ch Input voltage range -10V - +10V Input Impedance 1MΩ or more Non-Linearity error *2 ±0.03% of FSR CN1 Connector Assignment The same definition as the used AD board/card ATBA-8F: only CH0 - CH7 have buffer amplifier. (other 24 channels are straight-connected). External power supply 5VDC, 0.85A (Max.) 5VDC, 0.3A (Max.) Operating Conditions 0 - 50ºC, 10 - 90%RH (No condensation) Physical dimensions (mm) 110(W) x 70(D) x 22(H) (No protrusion) Weight 150g Supported Products AIO-163202F-PE, ADA16-32/2(PCI)F, ADA16-32/2(CB)F, AIO-163202FX-USB Standard CE Marking (EMC Directive Class A, RoHS Directive) *1 It depends on the number of AD board's/card’s input channels. *2 When the environment temperature is 0ºC or 50ºC, the maximum non-linearity error is 0.04% of full input range. Specifications of Interface Connector CN1, CN 2 Type of Connector PCR-E96LMD ( mfd. by HONDA ) Type of mating connector (option) PCR-E96FA ( mfd. by HONDA) Connecting Cable (option) PCB96PS-0.5P , PCB96PS-1.5P , PCB96P-1.5 PCA96PS-0.5P , PCA96PS-1.5P , PCA96P-1.5 ADC-68M/96F Physical Dimensions CN1 (EXT.SIGNALS) DC5V CN2 (BOARD/CARD) POWER V- FGV+ [mm] 110 70(4.9) (4.9) 22 (1.2)
Ver.1.05 ATBA-32F, ATBA-8F 2 Connect a Board/Card Board/Card Connection *1: To obtain an effective buffer amp connection, connect this unit near to the analog input board. Using a 0.5 m Shield Cable is recommended. Correspondence Products (Optional) Board for PCI Express : AIO-163202F-PE Board for PCI : ADA16-32/2(PCI)F USB I/O Unit : AIO-163202FX-USB Cables (Optional) Shielded cable with a 96-pin half-pitch connectors on 2 Ends : PCB96PS-0.5P (0.5m), PCB96PS-1.5P (1.5m) Flat cable with a 96-pin half-pitch connectors on 2 Ends : PCB96P-1.5 (1.5m), Shielded cable with a 96-pin half-pitch connector to open-ended : PCA96PS-0.5P (0.5m), PCA96PS-1.5P (1.5m) Flat able with a 96-pin half-pitch connector to open-ended : PCA96P-1.5 (1.5m) 68/96-pin conversion shielded cable for analog input/output : ADC-68M/96F (0.5m) *1 *1 ATBA-32F, ATBA-8F uses this cable when connecting the PC card. Connecting an External Power Supply Because the corresponding analog board/card have not voltage output, an external power supply is required to make the terminal work. Items Specification Power Voltage 5VDC Voltage Tolerance ±5% Current Capacity 0.85A or larger A bundled connector plug (MC1,5/3-ST-3,5, Phoenix Contact. Suitable wire: AWG28 - 16) can help you to connect the external power supply. When you using this MC1,5/3-ST-3,5 plug to connect the external power supply, please strip the end of the corresponding wire, insert it into the connector plug, then fix the screw to secure. There is an optional AC adapter available from CONTEC. Accessories (Optional): AC adapter (Input: 90 - 264VAC, Output: 5VDC 2.0A) : POA200-20 When using the external power supply: The terminal can provide the maximum power supply of 5VDC, 2A. To use the AC adapter, please connect it to the terminal first, then plug the AC adapter into a outlet. When the terminal is not used, please leave the AC adapter unplugged. Continuously using the AC adapter under high temperature environment will affect its life. Use the AC adapter not in a closed place but in a well-ventilated place. The AC adapter heats up itself when loaded heavily. If the AC adapter is exposed to high temperature or used continuously, you should keep the load at about 80% of the maximum load. - Please use the DC cable with a length of less than 1m to meet “CE EMC Directive”. ATBA-32F or ATBA-8F CN2CN1 CN1 (EXT.SIGNALS) DC5V CN2 (BOARD/CARD) POWER V- FGV+ Cable2 (Sold separately) Remote device side Board side Analog input board Cable1 (Sold separately) Analog input card CAUTION +5VDC FG Vi- Vi+ FG Vi- Vi+ Frame ground Power supply(GND) Power supply(5V)