APC18T12-9L ARTESYN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
75 Watts
Total Power: 75 Watts Input Voltages: 10.0 - 14.0 V # of Outputs: Single SPECIAL FEATURES Point-of-load (POL) applications) High current slew rate at 2.5 A / μS1 Open frame SMT High efficiency, 3.3 V @ 92% typical Adjustable output through external resistor programming -40 °C to +85 °C ambient operating temperature UVLO protection Positive Enable function Low output ripple and noise Regulation to zero load SAFETY UL/cUL 60950 Recognized TÜV EN60950 Licensed Electrical Specifications Input Input voltage ra nge 10.0 = 14.0 V Input surge 15 V Efficiency 3.3 V @ 92% typical Control Enable TTL compatible (positive enable Output Regulation (line, Load, Temp) <3% Load current 18 A max Ripple and noise1 50 mV Output adjust range 0.75 V - 5.5 V Current slew rate up to 2.5 A / μS Transient response1 3% typical deviation (for 5 Vo) for 50% to 75% step load 200 μS recovery Remote sense 10% of Vo Turn on input voltage 10 V (typical) UVLO hysteresis 1 V (typical) OCP/OTP Hiccup - auto recovery Isolation Non-isolated module Data Sheet
2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 Asia (HK) 14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon Hong Kong +852 2176 3333 For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com www.artesyn.com While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2015 Artesyn Embedded Technologies, Inc.
Ordering Information
Model Number Input Voltage Output Voltage Output Current Efficiency (Typical) APC18T12-9(J)L 10.0 - 14.0 V 0.75 - 5.50 Vdc 18 A 92% Note:
18 A max output current with total output power limited to 75 W - minimal output derating required
Typical efficiency for 3.3 V output; full load; noiminal inut voltage; 200 LFM at Ta = 25 °C Suffix “J” designates tray packaging, non “J” is tape and reel Environmental Specifications Operating temperature -40 °C to +85 °C Storage temperature -40 °C to +125 °C MTBF 1 million hours Notes: 1. 200 uF and 2x 150uF input and output capacitance required. 2. All specifications are typical at nominal line, full load and 25°C ambient temperature unless otherwise noted. 3. All specifications subject to change without notice. Mechanical drawings are for reference only. 4. Technical Reference Notes should be consulted for detailed information 5. Warranty: One year Mechanical Drawings PIN SIDE DOWN VIEW Recommended PAD Layout PAD Size MIN: 1.6 x 2.8 mm [0.065 x 0.110 inches] REC: 1.8 x 2.8 mm [0.070 x 0.110 inches] MAX: 2.0 x 3.0 mm [0.080 x 0.130 inches] GND VO TRIM SENSE PIN SIDE UP VIEW VIN ENABLE APC18-12V 11May2015