AP9950GP_14 A-POWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Advanced Power N-CHANNEL ENHANCEMENT MODE Electronics Corp. POWER MOSFET ▼ Simple Drive Requirement BVDSS 70V ▼ Lower On-resistance RDS(ON) 12mΩ ▼ Fast Switching Characteristic ID 70A

Description

ID@TC=25℃ A ID@TC=100℃ A IDM A PD@TC=25℃ W TSTG ℃ TJ ℃ Symbol Value Units Rthj-c Maximum Thermal Resistance, Junction-case 1.1 ℃/W Rthj-a Maixmum Thermal Resistance, Junction-ambient 62 ℃/W Data and specifications subject to change without notice Thermal Data Parameter Storage Temperature Range Total Power Dissipation 113.6 -55 to 150 Operating Junction Temperature Range Continuous Drain Current, VGS @ 10V 45 Pulsed Drain Current1 240 Gate-Source Voltage + 20 Continuous Drain Current, VGS @ 10V 70 Parameter Rating Drain-Source Voltage 70 200902061 AP9950GP RoHS-compliant Product -55 to 150 G D S Advanced Power MOSFETs from APEC provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. The TO-220 package is widely preferred for commercial-industrial through-hole applications. G D S TO-220(P)

Electrical Characteristics@Tj=25oC(unless otherwise specified) Symbol Parameter Test Conditions Min. Typ. Max. Units BVDSS Drain-Source Breakdown Voltage V GS=0V, ID=250uA 70 - - V RDS(ON) Static Drain-Source On-Resistance2 VGS=10V, ID=40A - - 12 m Ω VGS=4.5V, ID=30A - - 18 m Ω VGS(th) Gate Threshold Voltage V DS=VGS, ID=250uA 1 - 3 V gfs Forward Transconductance V DS=10V, ID=30A - 51 - S IDSS Drain-Source Leakage Current VDS=70V, VGS=0V - - 25 uA IGSS Gate-Source Leakage V GS= +20V, VDS=0V - - + 100 nA Qg Total Gate Charge2 ID=30A - 31 50 nC Qgs Gate-Source Charge V DS=56V - 6 - nC Qgd Gate-Drain ("Miller") Charge V GS=4.5V - 20.5 - nC td(on) Turn-on Delay Time2 VDS=30V - 10 - ns tr Rise Time I D=30A - 8 - ns td(off) Turn-off Delay Time R G=3.3Ω,VGS=10V - 39 - ns tf Fall Time R D=1Ω -2 2- ns Ciss Input Capacitance V GS=0V - 2440 3900 pF Coss Output Capacitance V DS=25V - 285 - pF Crss Reverse Transfer Capacitance f=1.0MHz - 185 - pF Rg Gate Resistance f=1.0MHz - 1.1 1.6 Ω Source-Drain Diode Symbol Parameter Test Conditions Min. Typ. Max. Units VSD Forward On Voltage2 IS=40A, VGS=0V - - 1.3 V trr Reverse Recovery Time2 IS=10A, VGS=0V - 35 - ns Qrr Reverse Recovery Charge dI/dt=100A/µs - 45 - nC Notes: 1.Pulse width limited by Max. junction temperature. 2.Pulse test THIS PRODUCT IS SENSITIVE TO ELECTROSTATIC DISCHARGE, PLEASE HANDLE WITH CAUTION. USE OF THIS PRODUCT AS A CRITICAL COMPONENT IN LIFE SUPPORT OR OTHER SIMILAR SYSTEMS IS NOT AUTHORIZED. APEC DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. APEC RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. AP9950GP

Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance v.s. Junction Temperature Fig 5. Forward Characteristic of Fig 6. Gate Threshold Voltage v.s. Reverse Diode Junction Temperature 120 160 200 0123456 V DS , Drain-to-Source Voltage (V) ID , Drain Current (A) T C =2 5o C 10V 7.0V 6.0V 5.0V V GS =4.0V 100 120 02468 V DS , Drain-to-Source Voltage (V) ID , Drain Current (A) T C = 150o C 10V 7.0V 6.0V 5.0V V GS =4.0V 0.4 0.8 1.2 1.6 2.0 2.4 -50 0 50 100 150 T j , Junction Temperature ( o C) Normalized RDS(ON) I D =40A V G =10V V SD , Source-to-Drain Voltage (V) IS(A) T j =25 o CT j =150 o C 0.0 0.4 0.8 1.2 1.6 -50 0 50 100 150 T j , Junction Temperature ( o C) Normalized VGS(th) (V) 2468 1 0 V GS Gate-to-Source Voltage (V) RDS(ON) (m I D =30A T C =25 o C

Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform AP9950GP 0 1 02 03 04 05 06 0 Q G , Total Gate Charge (nC) VGS , Gate to Source Voltage (V) V DS =35V V DS =42V V DS =56V I D =3 0A Q VG 4.5V QGS QGD QG Charge 1000 2000 3000 4000 5000 1 5 9 13 17 21 25 29 V DS , Drain-to-Source Voltage (V) C (pF) f=1.0MHz C iss C oxx C rss 0.01 0.1 t , Pulse Width (s) Normalized Thermal Response (Rthjc) PDM Duty factor = t/T Peak Tj = PDM x Rthjc + TC t T 0.02 0.01 0.05 0.1 0.2 Duty factor=0.5 Single Pulse 100 1000 0.1 1 10 100 V DS , Drain-to-Source Voltage (V) ID (A) T c =25 o C Single Pulse 100us 1ms 10ms 100ms DC td(on) tr td(off) tf VDS VGS 10% 90%