DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Advanced Power N-CHANNEL ENHANCEMENT MODE Electronics Corp. POWER MOSFET ▼ Simple Drive Requirement BVDSS 75V ▼ Lower On-resistance RDS(ON) 4.2mΩ ▼ Fast Switching Characteristic ID 126A ▼ RoHS Compliant & Halogen-Free

Description

ID@TC=25℃ A ID@TC=25℃ A ID@TC=100℃ A IDM A PD@TC=25℃ W PD@TA=25℃ W TSTG ℃ TJ ℃ Symbol Value Units Rthj-c Maximum Thermal Resistance, Junction-case 0.9 ℃/W Rthj-a Maximum Thermal Resistance, Junction-ambient 62 ℃/W Data and specifications subject to change without notice 201308281 Thermal Data Parameter Operating Junction Temperature Range -55 to 150 Drain Current, VGS @ 10V 80 Pulsed Drain Current1 480 Storage Temperature Range Total Power Dissipation 138 -55 to 150 Gate-Source Voltage + 20 Drain Current, VGS @ 10V3 120 Drain Current (Chip) 126 Total Power Dissipation 2 AP96LT07GP-HF Halogen-Free Product Parameter Rating Drain-Source Voltage 75 G D S AP96LT07 series are from Advanced Power innovated design and silicon process technology to achieve the lowest possible on- resistance and fast switching performance. It provides the designe r with an extreme efficient device for use in a wide range of powe r applications. The TO-220 package is widely preferred for all commercial- industrial through hole applications. The low thermal resistance and low package cost contribute to the worldwide popular package. G D S TO-220(P)

Electrical Characteristics@Tj=25oC(unless otherwise specified) Symbol Parameter Test Conditions Min. Typ. Max. Units BVDSS Drain-Source Breakdown Voltage V GS=0V, ID=250uA 75 - - V RDS(ON) Static Drain-Source On-Resistance2 VGS=10V, ID=40A - - 4.2 m Ω VGS(th) Gate Threshold Voltage V DS=VGS, ID=250uA 2 - 5 V gfs Forward Transconductance V DS=5V, ID=40A - 80 - S IDSS Drain-Source Leakage Current VDS=60V, VGS=0V - - 25 uA IGSS Gate-Source Leakage V GS= +20V, VDS=0V - - + 100 nA Qg Total Gate Charge I D=40A - 145 232 nC Qgs Gate-Source Charge V DS=40V - 65 - nC Qgd Gate-Drain ("Miller") Charge V GS=10V - 10 - nC td(on) Turn-on Delay Time V DS=40V - 35 - ns tr Rise Time I D=40A - 83 - ns td(off) Turn-off Delay Time R G=3.3Ω -7 0- ns tf Fall Time V GS=10V - 9 - ns Ciss Input Capacitance V GS=0V - 14000 22400 pF Coss Output Capacitance V DS=40V - 600 - pF Crss Reverse Transfer Capacitance f=1.0MHz - 35 - pF Rg Gate Resistance f=1.0MHz - 2 4 Ω Source-Drain Diode Symbol Parameter Test Conditions Min. Typ. Max. Units VSD Forward On Voltage2 IS=40A, VGS=0V - - 1.3 V trr Reverse Recovery Time I S=10A, VGS=0V, - 55 - ns Qrr Reverse Recovery Charge dI/dt=100A/µs - 105 - nC Notes: 1.Pulse width limited by Max. junction temperature. 2.Pulse test 3.Package limitation current is 120A. THIS PRODUCT IS SENSITIVE TO ELECTROSTATIC DISCHARGE, PLEASE HANDLE WITH CAUTION. USE OF THIS PRODUCT AS A CRITICAL COMPONENT IN LIFE SUPPORT OR OTHER SIMILAR SYSTEMS IS NOT AUTHORIZED. APEC DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. APEC RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. AP96LT07GP-HF

Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance v.s. Junction Temperature Fig 5. Forward Characteristic of Fig 6. Gate Threshold Voltage v.s. Reverse Diode Junction Temperature AP96LT07GP-HF 120 160 200 02468 1 0 1 2 V DS , Drain-to-Source Voltage (V) ID , Drain Current (A) T C =150 o C 10V 9.0V 8.0V 7.0V V G =6.0V 160 240 320 0 4 8 12 16 V DS , Drain-to-Source Voltage (V) ID , Drain Current (A) T C =25 o C 10V 9.0V 8.0V 7.0V V G = 6.0V 0.4 0.8 1.2 1.6 2.0 2.4 -50 0 50 100 150 T j , Junction Temperature ( o C) Normalized RDS(ON) I D =40A V G =10V V SD , Source-to-Drain Voltage (V) IS(A) T j =25 o CT j =150 o C 0.0 0.4 0.8 1.2 1.6 2.0 -50 0 50 100 150 T j , Junction Temperature ( o C ) Normalized VGS(th) I D =250uA 456789 1 0 V GS Gate-to-Source Voltage (V) RDS(ON) (m I D = 40A T C = 25 o C

Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance Fig 11. Drain Current v.s. Case Temperature Fig 12. Gate Charge Waveform 100 1000 0.1 1 10 100 V DS ,Drain-to-Source Voltage (V) ID (A) T C =25 o C Single Pulse 100us 1ms 10ms 100ms DC 0.01 0.1 t , Pulse Width (s) Normalized Thermal Response (Rthjc) PDM Duty Factor = t/T Peak Tj = PDM x Rthjc + TC t T0.02 0.01 0.05 0.1 0.2 Duty factor = 0.5 Single Pulse 0 40 80 120 160 200 Q G , Total Gate Charge (nC) VGS , Gate to Source Voltage (V) I D =40A V DS =40V 4000 8000 12000 16000 20000 1 5 9 1 31 72 12 52 93 33 74 14 5 V DS ,Drain-to-Source Voltage (V) C (pF) f=1.0MHz C iss C oss C rss Q VG 10V QGS QGD QG Charge Operation in this area limited by RDS(ON) 120 150 25 50 75 100 125 150 T C , Case Temperature ( o C ) ID , Drain Current (A) Limited by package