DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Advanced Power N-CHANNEL ENHANCEMENT MODE Electronics Corp. POWER MOSFET ▼ Simple Drive Requirement BVDSS 80V ▼ Lower On-resistance RDS(ON) 4.6mΩ ▼ Fast Switching Characteristic ID 140A ▼ RoHS Compliant & Halogen-Free

Description

ID@TC=25℃ A ID@TC=25℃ A ID@TC=100℃ A IDM A PD@TC=25℃ W PD@TA=25℃ W TSTG ℃ TJ ℃ Symbol Value Units Rthj-c Maximum Thermal Resistance, Junction-case 0.8 ℃/W Rthj-a Maixmum Thermal Resistance, Junction-ambient 62 ℃/W Data and specifications subject to change without notice Thermal Data Parameter Storage Temperature Range Total Power Dissipation 156 -55 to 150 Operating Junction Temperature Range Continuous Drain Current, VGS @ 10V3 Pulsed Drain Current1 320 Gate-Source Voltage + 20 Continuous Drain Current, VGS @ 10V3 Continuous Drain Current (Chip) Parameter Rating Drain-Source Voltage 80 Halogen-Free Product -55 to 150 140 Total Power Dissipation 2 201304171 G D S AP93T08 series are from Advanced Power innovated design and silicon process technology to achieve the lowest possible on- resistance and fast switching performance. It provides the designe r with an extreme efficient device for use in a wide range of powe r applications. The TO-220 package is widely preferred for all commercial-industrial through hole applications. The low thermal resistance and lo w package cost contribute to the worldwide popular package. G D S TO-220(P)

Electrical Characteristics@Tj=25oC(unless otherwise specified) Symbol Parameter Test Conditions Min. Typ. Max. Units BVDSS Drain-Source Breakdown Voltage V GS=0V, ID=250uA 80 - - V RDS(ON) Static Drain-Source On-Resistance2 VGS=10V, ID=40A - - 4.6 m Ω VGS(th) Gate Threshold Voltage V DS=VGS, ID=250uA 2 - 5 V gfs Forward Transconductance V DS=10V, ID=40A - 60 - S IDSS Drain-Source Leakage Current VDS=64V, VGS=0V - - 25 uA IGSS Gate-Source Leakage V GS= +20V, VDS=0V - - + 100 nA Qg Total Gate Charge I D=40A - 68 109 nC Qgs Gate-Source Charge V DS=64V - 23 - nC Qgd Gate-Drain ("Miller") Charge V GS=10V - 24 - nC td(on) Turn-on Delay Time V DS=40V - 23 - ns tr Rise Time I D=40A - 95 - ns td(off) Turn-off Delay Time R G=3.3Ω -4 0- ns tf Fall Time V GS=10V - 60 - ns Ciss Input Capacitance V GS=0V - 4900 7840 pF Coss Output Capacitance V DS=25V - 1770 - pF Crss Reverse Transfer Capacitance f=1.0MHz - 1580 - pF Rg Gate Resistance f=1.0MHz - 3 6 Ω Source-Drain Diode Symbol Parameter Test Conditions Min. Typ. Max. Units VSD Forward On Voltage2 IS=40A, VGS=0V - - 1.3 V trr Reverse Recovery Time I S=10A, VGS=0V - 70 - ns Qrr Reverse Recovery Charge dI/dt=100A/µs - 120 - nC Notes: 1.Pulse width limited by Max. junction temperature. 2.Pulse test 3.Package limitation current is 80A. THIS PRODUCT IS SENSITIVE TO ELECTROSTATIC DISCHARGE, PLEASE HANDLE WITH CAUTION. USE OF THIS PRODUCT AS A CRITICAL COMPONENT IN LIFE SUPPORT OR OTHER SIMILAR SYSTEMS IS NOT AUTHORIZED. APEC DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. APEC RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. AP93T08GP-HF

Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. Normalized BVDSS v.s. Junction Fig 4. Normalized On-Resistance Temperature v.s. Junction Temperature Fig 5. Forward Characteristic of Fig 6. Gate Threshold Voltage v.s. Reverse Diode Junction Temperature 160 240 320 0 8 16 24 32 V DS , Drain-to-Source Voltage (V) ID , Drain Current (A) T C =2 5o C 10V 9.0V 8.0V 7.0V V GS =6.0V 120 160 200 048 1 2 1 6 V DS , Drain-to-Source Voltage (V) ID , Drain Current (A) T C = 150o C 10V 9.0V 8.0V 7.0V V GS =6.0V 0.4 0.8 1.2 1.6 2.0 2.4 -50 0 50 100 150 T j , Junction Temperature ( o C) Normalized RDS(ON) I D =40A V G =10V V SD , Source-to-Drain Voltage (V) IS(A) T j =25 o CT j =150 o C 0.0 0.4 0.8 1.2 1.6 -50 0 50 100 150 T j , Junction Temperature ( o C) Normalized VGS(th) I D =1mA 0.8 0.9 1.1 1.2 -50 0 50 100 150 T j , Junction Temperature ( o C) Normalized BVDSS I D =1mA

Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance Fig 11. Maximum Continuous Drain Current Fig 12. Gate Charge Waveform v.s. Case Temperature 0 2 04 06 08 0 Q G , Total Gate Charge (nC) VGS , Gate to Source Voltage (V) I D = 40A V DS = 64V 2000 4000 6000 8000 1 5 9 1 31 72 12 52 9 V DS , Drain-to-Source Voltage (V) C (pF) f=1.0MHz C iss C oss C rss 0.01 0.1 t , Pulse Width (s) Normalized Thermal Response (Rthjc) PDM Duty factor = t/T Peak Tj = PDM x Rthjc + TC t T 0.02 0.01 0.05 0.1 0.2 Duty factor=0.5 Single Pulse 0.1 100 1000 0.1 1 10 100 1000 V DS , Drain-to-Source Voltage (V) ID (A) T C =25 o C Single Pulse 100us 1ms 10ms 100ms DC Operation in this area limited by RDS(ON) 120 160 25 50 75 100 125 150 T C , Case Temperature ( o C ) ID , Drain Current (A) Limited by package Q VG 10V QGS QGD QG Charge