DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Advanced Power N-CHANNEL ENHANCEMENT MODE Electronics Corp. POWER MOSFET ▼ Simple Drive Requirement BVDSS 30V ▼ SO-8 Compatible with Heatsink RDS(ON) 7.2mΩ ▼ Low On-resistance ID 55A ▼ RoHS Compliant & Halogen-Free

Description

ID@TC=25℃ A ID@TA=25℃ A ID@TA=70℃ A IDM A PD@TC=25℃ W PD@TA=25℃ W TSTG ℃ TJ ℃ Symbol Value Unit Rthj-c Maximum Thermal Resistance, Junction-case 3.5 ℃/W Rthj-a Maximum Thermal Resistance, Junction-ambient 3 25 ℃/W Data and specifications subject to change without notice +20 20.8 Halogen-Free Product 16.6 Rating -55 to 150 Drain Current, VGS @ 10V3 201312061 Parameter Total Power Dissipation Operating Junction Temperature Range Thermal Data -55 to 150 Pulsed Drain Current1 160 Storage Temperature Range 35.7Total Power Dissipation Parameter Drain-Source Voltage Gate-Source Voltage Drain Current, V GS @ 10V3 Drain Current (Chip), VGS @ 10V AP76T03A series are from Advanced Power innovated design and silicon process technology to achieve the lowest possible on- resistance and fast switching performance. It provides the designe r with an extreme efficient device for use in a wide range of powe r applications. The PMPAK ® 5x6 package is special for DC-DC converters application and the foot print is compatible with SO-8 with backside heat sink and lower profile. G D S S S S G PMPAK® 5x6 D D D D

Electrical Characteristics@Tj=25oC(unless otherwise specified) Symbol Parameter Test Conditions Min. Typ. Max. Units BVDSS Drain-Source Breakdown Voltage V GS=0V, ID=250uA 30 - - V RDS(ON) Static Drain-Source On-Resistance2 VGS=10V, ID=20A - 5.8 7.2 m Ω VGS=4.5V, ID=20A - 8.2 11 m Ω VGS(th) Gate Threshold Voltage V DS=VGS, ID=250uA 1 1.4 3 V gfs Forward Transconductance V DS=10V, ID=20A - 34 - S IDSS Drain-Source Leakage Current VDS=24V, VGS=0V - - 10 uA IGSS Gate-Source Leakage V GS=+20V, VDS=0V - - + 100 nA Qg Total Gate Charge I D=20A - 8 12.8 nC Qgs Gate-Source Charge V DS=15V - 2 - nC Qgd Gate-Drain ("Miller") Charge V GS=4.5V - 4.5 - nC td(on) Turn-on Delay Time V DS=15V - 8 - ns tr Rise Time I D=1A - 9 - ns td(off) Turn-off Delay Time R G=3.3Ω -2 1- ns tf Fall Time V GS=10V - 10 - ns Ciss Input Capacitance V GS=0V - 800 1280 pF Coss Output Capacitance V DS=15V - 260 - pF Crss Reverse Transfer Capacitance f=1.0MHz - 105 - pF Rg Gate Resistance f=1.0MHz - 1.2 2.4 Ω Source-Drain Diode Symbol Parameter Test Conditions Min. Typ. Max. Units VSD Forward On Voltage2 IS=20A, VGS=0V - - 1.2 V trr Reverse Recovery Time I S=10A, VGS=0V, - 19 - ns Qrr Reverse Recovery Charge dI/dt=100A/µs - 11 - nC Notes: 1.Pulse width limited by Max. junction temperature. 2.Pulse test 3.Surface mounted on 1 in2 copper pad of FR4 board, t <10sec, 60oC/W at steady state. THIS PRODUCT IS SENSITIVE TO ELECTROSTATIC DISCHARGE, PLEASE HANDLE WITH CAUTION. USE OF THIS PRODUCT AS A CRITICAL COMPONENT IN LIFE SUPPORT OR OTHER SIMILAR SYSTEMS IS NOT AUTHORIZED. APEC DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. APEC RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. AP76T03AGMT-HF

Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance v.s. Junction Temperature Fig 5. Forward Characteristic of Fig 6. Gate Threshold Voltage v.s. Reverse Diode Junction Temperature 120 160 02468 1 0 V DS , Drain-to-Source Voltage (V) ID , Drain Current (A) 10V 7.0V 6.0V 5.0V V G = 4.0V T C =25 o C 100 02468 1 0 V DS , Drain-to-Source Voltage (V) ID , Drain Current (A) T C = 150o C 10V 7.0V 6.0V 5.0V V G = 4.0V 5.5 6.5 7.5 8.5 9.5 2468 1 0 V GS , Gate-to-Source Voltage (V) RDS(ON) (m I D =2 0A T C =25 o C 0.6 0.8 1.0 1.2 1.4 1.6 1.8 -50 0 50 100 150 T j , Junction Temperature ( o C) Normalized RDS(ON) I D =20A V G =10V 0.0 0.4 0.8 1.2 1.6 2.0 -50 0 50 100 150 T j , Junction Temperature ( o C) Normalized VGS(th) V SD , Source-to-Drain Voltage (V) IS(A) T j =25 o CT j =150 o C I D =250uA

Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance Fig 11. Drain Current v.s. Case Fig 12. Transfer Characteristics Temperature 048 1 2 1 6 Q G , Total Gate Charge (nC) VGS , Gate to Source Voltage (V) I D =2 0A V DS =15V 200 400 600 800 1000 1 5 9 13 17 21 25 29 33 V DS , Drain-to-Source Voltage (V) C (pF) f=1.0MHz C iss C oss C rss 0.01 0.1 t , Pulse Width (s) Normalized Thermal Response (Rthjc) PDM Duty factor = t/T Peak Tj = PDM x Rthjc + Tc t T 0.02 0.01 0.05 0.1 0.2 Duty factor=0.5 Single Pulse 0.1 100 1000 0.1 1 10 100 V DS , Drain-to-Source Voltage (V) ID (A) T C =25 o C Single Pulse 100us 1ms 10ms 100ms DC Operation in this area limited by RDS(ON) 25 50 75 100 125 150 T C , Case Temperature ( o C ) ID , Drain Current (A) 0123456 V GS , Gate-to-Source Voltage (V) ID , Drain Current (A) T j =150 o C T j =25 o C V DS =5V T j = -40 o C