AP4953D A-POWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Advanced Power P-CHANNEL ENHANCEMENT MODE Electronics Corp. POWER MOSFET ▼ ▼ ▼ ▼ Simple Drive Requirement BVDSS -30V ▼ ▼ ▼ ▼ Low On-resistance RDS(ON) 53mΩ ▼ ▼ ▼ ▼ Fast Switching ID -5A

Description

ID@TA=25℃ A ID@TA=70℃ A IDM A PD@TA=25℃ W W/℃ TSTG ℃ TJ ℃ Symbol Value Unit Rthj-amb Thermal Resistance Junction-ambient 3 Max. 62.5 ℃/W Data and specifications subject to change without notice Thermal Data Parameter Total Power Dissipation 2 -55 to 150 Operating Junction Temperature Range -55 to 150 Linear Derating Factor 0.016 Storage Temperature Range Continuous Drain Current3 - 4 Pulsed Drain Current1 - 20 Parameter Drain-Source Voltage Gate-Source Voltage Continuous Drain Current 200922031 AP4953D Rating - 30 ±20 - 5 The Advanced Power MOSFETs from APEC provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost- effectiveness. PDIP-8

Electrical Characteristics@Tj=25oC(unless otherwise specified) Symbol Parameter Test Conditions Min. Typ. Max. Units BVDSS Drain-Source Breakdown Voltage V GS=0V, ID=-250uA -30 - - V ΔBVDSS/ΔTj Breakdown Voltage Temperature Coefficient Reference to 25℃, ID=-1mA - -0.1 -V / ℃ RDS(ON) Static Drain-Source On-Resistance2 VGS=-10V, ID=-5A - - 53 mΩ VGS=-4.5V, ID=-4A - - 90 mΩ VGS(th) Gate Threshold Voltage V DS=VGS, ID=-250uA -1 - -3 V gfs Forward Transconductance V DS=-10V, ID=-5A - 6 - S IDSS Drain-Source Leakage Current (Tj=25oC) VDS=-30V, VGS=0V - - -1 uA Drain-Source Leakage Current (Tj=70oC) VDS=-24V, VGS=0V - - -25 uA IGSS Gate-Source Leakage V GS=- - nA Qg Total Gate Charge2 ID=-5A - 9 15 nC Qgs Gate-Source Charge V DS=-15V - 2 - nC Qgd Gate-Drain ("Miller") Charge V GS=-4.5V - 5 - nC td(on) Turn-on Delay Time2 VDS=-15V - 10 - ns tr Rise Time I D=-1A - 9 - ns td(off) Turn-off Delay Time R G=6Ω,VGS=-10V - 20 - ns tf Fall Time R D=15Ω -2 5- ns Ciss Input Capacitance V GS=0V - 500 800 pF Coss Output Capacitance V DS=-15V - 217 - pF Crss Reverse Transfer Capacitance f=1.0MHz - 153 - pF Source-Drain Diode Symbol Parameter Test Conditions Min. Typ. Max. Units VSD Forward On Voltage2 IS=-1.7A, VGS=0V - - -1.2 V trr Reverse Recovery Time IS=-5A, VGS=0V, - 21.5 - ns Qrr Reverse Recovery Charge dI/dt=100A/µs - 18 - nC Notes: 1.Pulse width limited by Max. junction temperature. 2.Pulse width <300us , duty cycle <2%. 3.Surface mounted on 1 in2 copper pad of FR4 board ; 90 ℃/W when mounted on Min. copper pad. AP4953D ± 20V ±100

Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance v.s. Junction Temperature Fig 5. Forward Characteristic of Fig 6. Gate Threshold Voltage v.s. Reverse Diode Junction Temperature 01234 -V DS , Drain-to-Source Voltage (V) -ID , Drain Current (A) T A =25 o C -10V -8.0V -6.0V V GS =-4.0V 012345 -V DS , Drain-to-Source Voltage (V) -ID , Drain Current (A) T A =150 o C -10V -8.0V -6.0V V GS =-4.0V 3579 1 1 -V GS , Gate-to-Source Voltage (V) RDS(ON) (m ΩΩΩΩ) I D =-5A T A =25 ℃℃℃℃ 0.6 0.8 1.0 1.2 1.4 1.6 1.8 -50 0 50 100 150 T j , Junction Temperature ( o C) Normalized RDS(ON) V GS =10V I D =-5A 0.01 0.10 1.00 10.00 100.00 -V SD , Source-to-Drain Voltage (V) -IS(A) T j =25 o CT j =150 o C -50 0 50 100 150 T j , Junction Temperature ( o C) -VGS(th) (V)

Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics Fig 9. Maximum Safe Operating Area Fig10. Effective Transient Thermal Impedance Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform AP4953D 02468 1 0 1 2 1 4 1 6 Q G , Total Gate Charge (nC) -VGS , Gate to Source Voltage (V) I D =-5.3A V DS =-24V 100 1000 10000 1 5 9 13 17 21 25 29 -V DS , Drain-to-Source Voltage (V) C (pF) f=1.0MHz Ciss Coss Crss td(on) tr td(off)tf VDS VGS 10% 90% Q VG -4.5V QGS QGD QG Charge 0.001 0.01 0.1 0.0001 0.001 0.01 0.1 1 10 100 1000 t , Pulse Width (s) Normalized Thermal Response (R thja) PDM Duty factor = t/T Peak Tj = PDM x Rthja + Ta Rthja=90oC/W t T 0.02 0.01 0.05 0.1 0.2 Duty Factor=0.5 Single Pulse 0.01 0.1 100 0.1 1 10 100 -V DS , Drain-to-Source Voltage (V) -ID (A) DCT A =25 o C Single Pulse 1ms 10ms 100ms