DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Advanced Power N AND P-CHANNEL ENHANCEMENT Electronics Corp. MODE POWER MOSFET ▼ Simple Drive Requirement N-CH BV DSS 30V ▼ Good Thermal Performance RDS(ON) 24mΩ ▼ Fast Switching Performance ID 9A ▼ RoHS Compliant P-CH BV DSS -30V RDS(ON) 36mΩ Description ID -8A Absolute Maximum Ratings Symbol Parameter Rating Units N-channel P-channel VDS Drain-Source Voltage 30 -30 V VGS Gate-Source Voltage + 20 + 20 V ID@TA=25℃ Continuous Drain Current3 9 -8 A ID@TA=70℃ Continuous Drain Current3 7.2 -6.4 A IDM Pulsed Drain Current1 50 -50 A PD@TA=25℃ Total Power Dissipation 3.1 W TSTG Storage Temperature Range -55 to 150 ℃ TJ Operating Junction Temperature Range -55 to 150 ℃ Symbol Value Unit Rthj-c Maximum Thermal Resistance, Junction-case 8 ℃/W Rthj-a Maximum Thermal Resistance, Junction-ambient 3 40 ℃/W Data and specifications subject to change without notice 201303213 Parameter Thermal Data Halogen-Free Product Advanced Power MOSFETs from APEC provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost- effectiveness. TO-252-4L G1 S2 D1/D2

Symbol Parameter Test Conditions Min. Typ. Max. Units BVDSS Drain-Source Breakdown Voltage V GS=0V, ID=250uA 30 - - V RDS(ON) Static Drain-Source On-Resistance2 VGS=10V, ID=6A - - 24 m Ω VGS=4.5V, ID=4A - - 32 m Ω VGS(th) Gate Threshold Voltage V DS=VGS, ID=250uA 1 - 3 V gfs Forward Transconductance V DS=10V, ID=6A - 17 - S IDSS Drain-Source Leakage Current VDS=30V, VGS=0V - - 10 uA Drain-Source Leakage Current (Tj=70oC) VDS=24V, VGS=0V - - 25 uA IGSS Gate-Source Leakage V GS=+20V, VDS=0V - - + 30 uA Qg Total Gate Charge I D=6A - 8.3 13 nC Qgs Gate-Source Charge V DS=24V - 1.5 - nC Qgd Gate-Drain ("Miller") Charge V GS=4.5V - 4 - nC td(on) Turn-on Delay Time V DS=15V - 5 - ns tr Rise Time I D=6A - 18 - ns td(off) Turn-off Delay Time R G=3.3Ω,VGS=10V - 18 - ns tf Fall Time R D=2.5Ω -4- ns Ciss Input Capacitance V GS=0V - 575 920 pF Coss Output Capacitance V DS=25V - 100 - pF Crss Reverse Transfer Capacitance f=1.0MHz - 70 - pF Source-Drain Diode Symbol Parameter Test Conditions Min. Typ. Max. Units VSD Forward On Voltage2 IS=6A, VGS=0V - - 1.3 V trr Reverse Recovery Time I S=6A, VGS=0V - 19 - ns Qrr Reverse Recovery Charge dI/dt=100A/µs - 14 - nC AP4506GEH-HF

Symbol Parameter Test Conditions Min. Typ. Max. Units BVDSS Drain-Source Breakdown Voltage V GS=0V, ID=-250uA -30 - - V RDS(ON) Static Drain-Source On-Resistance2 VGS=-10V, ID=-5A - - 36 m Ω VGS=-4.5V, ID=-3A - - 48 m Ω VGS(th) Gate Threshold Voltage V DS=VGS, ID=-250uA -1 - -3 V gfs Forward Transconductance V DS=-10V, ID=-5A - 12 - S IDSS Drain-Source Leakage Current VDS=-30V, VGS=0V - - -10 uA Drain-Source Leakage Current (Tj=70oC) VDS=-24V, VGS=0V - - -25 uA IGSS Gate-Source Leakage V GS=+20V, VDS=0V - - + 30 uA Qg Total Gate Charge I D=-5A - 12.6 20 nC Qgs Gate-Source Charge V DS=-24V - 2.4 - nC Qgd Gate-Drain ("Miller") Charge V GS=-4.5V - 6.2 - nC td(on) Turn-on Delay Time V DS=-15V - 8 - ns tr Rise Time I D=-5A - 16 - ns td(off) Turn-off Delay Time R G=3.3Ω,VGS=-10V - 26 - ns tf Fall Time R D=3Ω -4 1- ns Ciss Input Capacitance V GS=0V - 1045 1670 pF Coss Output Capacitance V DS=-25V - 220 - pF Crss Reverse Transfer Capacitance f=1.0MHz - 150 - pF Source-Drain Diode Symbol Parameter Test Conditions Min. Typ. Max. Units VSD Forward On Voltage2 IS=-5A, VGS=0V - - -1.3 V trr Reverse Recovery Time I S=-5A, VGS=0V - 23 - ns Qrr Reverse Recovery Charge dI/dt=-100A/µs - 15 - nC Notes: 1.Pulse width limited by Max. junction temperature. 2.Pulse test 3.N-CH , P-CH are same , mounted on 2oz FR4 board t ≦10s. THIS PRODUCT IS SENSITIVE TO ELECTROSTATIC DISCHARGE, PLEASE HANDLE WITH CAUTION. USE OF THIS PRODUCT AS A CRITICAL COMPONENT IN LIFE SUPPORT OR OTHER SIMILAR SYSTEMS IS NOT AUTHORIZED. APEC DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. APEC RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN.

Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance v.s. Junction Temperature Fig 5. Forward Characteristic of Fig 6. Gate Threshold Voltage v.s. Reverse Diode Junction Temperature 012345 V DS , Drain-to-Source Voltage (V) ID , Drain Current (A) T C =2 5o C 10V 7.0V 5.0V 4.5V V G =3.0V V SD , Source-to-Drain Voltage (V) IS(A) T j =25 o CT j =150 o C 0246 V DS , Drain-to-Source Voltage (V) ID , Drain Current (A) T C = 150o C 10V 7.0V 5.0V 4.5V V G =3.0V 2468 1 0 V GS , Gate-to-Source Voltage (V) RDS(ON) (m I D =4A T C =25 o C 0.6 0.8 1.0 1.2 1.4 1.6 1.8 -50 0 50 100 150 T j , Junction Temperature ( o C) Normalized RDS(ON) I D =6A V G =10V 0.4 0.8 1.2 1.6 -50 0 50 100 150 T j , Junction Temperature ( o C) Normalized VGS(th)

Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform Q VG 4.5V QGS QGD QG Charge 0 5 10 15 20 Q G , Total Gate Charge (nC) VGS , Gate to Source Voltage (V) I D =6A V DS =24V 100 1000 1 5 9 13 17 21 25 29 V DS , Drain-to-Source Voltage (V) C (pF) f=1.0MHz C iss C oss C rss 0.01 0.1 0.0001 0.001 0.01 0.1 1 10 100 t , Pulse Width (s) Normalized Thermal Response (Rthja) PDM Duty factor = t/T Peak Tj = PDM x Rthja + Ta Rthja=75℃/W t T 0.02 0.01 0.05 0.1 0.2 Duty factor=0.5 Single Pulse 0.01 0.1 100 0.1 1 10 100 V DS , Drain-to-Source Voltage (V) ID (A) T A =25 o C Single Pulse 100us 1ms 10ms 100ms DC td(on) tr td(off) tf VDS VGS 10% 90%

Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance v.s. Junction Temperature Fig 5. Forward Characteristic of Fig 6. Gate Threshold Voltage v.s. Reverse Diode Junction Temperature 012345 -V DS , Drain-to-Source Voltage (V) -ID , Drain Current (A) T C =2 5o C -10V -7.0V -5.0V -4.5V V G = - 3.0V 2468 1 0 -V GS ,Gate-to-Source Voltage (V) RDS(ON) (m I D =-3A T C =25 o C 0123456 -V DS , Drain-to-Source Voltage (V) -ID , Drain Current (A) T C = 150o C -10V -7.0V -5.0V -4.5V V G = - 3.0V 0.6 0.8 1.0 1.2 1.4 1.6 -50 0 50 100 150 T j , Junction Temperature ( o C) Normalized RDS(ON) I D =-5A V G =-10V -V SD , Source-to-Drain Voltage (V) -IS(A) T j =25 o CT j =150 o C 0.4 0.8 1.2 1.6 -50 0 50 100 150 T j , Junction Temperature ( o C) Normalized VGS(th)

Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform 0 5 10 15 20 25 30 Q G , Total Gate Charge (nC) -VGS , Gate to Source Voltage (V) I D = -5A V DS = -24V 100 1000 10000 1 5 9 13 17 21 25 29 -V DS , Drain-to-Source Voltage (V) C (pF) f=1.0MHz C iss C oss C rss 0.01 0.1 0.001 0.01 0.1 1 10 100 t , Pulse Width (s) Normalized Thermal Response (Rthjc) PDM Duty factor = t/T Peak Tj = PDM x Rthja + Ta Rthja=75℃/W t T 0.02 0.01 0.05 0.1 0.2 Duty factor=0.5 Single Pulse 0.01 0.1 100 0.1 1 10 100 -V DS , Drain-to-Source Voltage (V) -ID (A) T A =25 o C Single Pulse 100us 1ms 10ms 100ms DC Q VG -4.5V QGS QGD QG Chargetd(on) tr td(off)tf VDS VGS 10% 90%