AP4435GH-HF_16 A-POWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Advanced Power P-CHANNEL ENHANCEMENT MODE Electronics Corp. POWER MOSFET ▼ Simple Drive Requirement BVDSS -30V ▼ Lower On-resistance RDS(ON) 20mΩ ▼ Fast Switching Characteristic ID -40A ▼ RoHS Compliant & Halogen-Free

Description

Absolute Maximum Ratings@Tj=25oC(unless otherwise specified) Symbol Units VDS V VGS V ID@TC=25℃ A ID@TC=100℃ A IDM A PD@TC=25℃ W W/℃ TSTG ℃ TJ ℃ Symbol Value Units Rthj-c Maximum Thermal Resistance, Junction-case 2.8 ℃/W Rthj-a 62.5 ℃/W Rthj-a Maximum Thermal Resistance, Junction-ambient 110 ℃/W Data and specifications subject to change without notice -55 to 150 Linear Derating Factor Thermal Data 0.36 Parameter Total Power Dissipation Operating Junction Temperature Range Storage Temperature Range Gate-Source Voltage Drain Current, VGS @ 10V -30 +20 -40 Drain Current, VGS @ 10V -25 Pulsed Drain Current1 -150 44.6 -55 to 150 Parameter Drain-Source Voltage Rating Halogen-Free Product 201411065AP Maximum Thermal Resistance, Junction-ambient (PCB mount)3 G D S G D S TO-251(J) G D S TO-252(H) AP4435 series are from Advanced Power innovated design and silicon process technology to achieve the lowest possible on-resistance and fast switching performance. It provides the designer with an extreme efficient device for use in a wide range of power applications. The TO-252 package is widely preferred for all commercial-industrial surface mount applications using infrared reflow technique and suited for high current application due to the low connection resistance. The through-hole version (AP4435GJ) are available for low-profile applications.

Electrical Characteristics@Tj=25oC(unless otherwise specified) Symbol Parameter Test Conditions Min. Typ. Max. Units BVDSS Drain-Source Breakdown Voltage V GS=0V, ID=-250uA -30 - - V RDS(ON) Static Drain-Source On-Resistance2 VGS=-10V, ID=-26A - - 20 m Ω VGS=-4.5V, ID=-16A - - 36 m Ω VGS(th) Gate Threshold Voltage V DS=VGS, ID=-250uA -1 - -3 V gfs Forward Transconductance V DS=-10V, ID=-26A - 31 - S IDSS Drain-Source Leakage Current VDS=-24V, VGS=0V - - -30 uA IGSS Gate-Source Leakage V GS=+20V, VDS=0V - - + 100 nA Qg Total Gate Charge I D=-26A - 16.5 32 nC Qgs Gate-Source Charge V DS=-25V - 2.7 - nC Qgd Gate-Drain ("Miller") Charge V GS=-4.5V - 11 - nC td(on) Turn-on Delay Time V DS=-15V - 7.5 - ns tr Rise Time I D=-26A - 64 - ns td(off) Turn-off Delay Time R G=3.3Ω -2 4- ns tf Fall Time V GS=-10V - 92 - ns Ciss Input Capacitance V GS=0V - 1160 1970 pF Coss Output Capacitance V DS=-25V - 195 - pF Crss Reverse Transfer Capacitance f=1.0MHz - 175 - pF Source-Drain Diode Symbol Parameter Test Conditions Min. Typ. Max. Units VSD Forward On Voltage2 IS=-26A, VGS=0V - - -1.3 V trr Reverse Recovery Time I S=-10A, VGS=0V, - 25 - ns Qrr Reverse Recovery Charge dI/dt=100A/µs - 15 - nC Notes: 1.Pulse width limited by Max. junction temperature. 2.Pulse test THIS PRODUCT IS SENSITIVE TO ELECTROSTATIC DISCHARGE, PLEASE HANDLE WITH CAUTION. USE OF THIS PRODUCT AS A CRITICAL COMPONENT IN LIFE SUPPORT OR OTHER SIMILAR SYSTEMS IS NOT AUTHORIZED. APEC DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. APEC RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. 3.Surface mounted on 1 in2 copper pad of FR4 board AP4435GH/J-HF

Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance v.s. Junction Temperature 2.01E+08 Fig 5. Forward Characteristic of Fig 6. Gate Threshold Voltage v.s. Reverse Diode Junction Temperature 100 0123456 -V DS , Drain-to-Source Voltage (V) -ID , Drain Current (A) T C =2 5o C -10V -7.0V -6.0V -5.0V V G =-4. 0V 0.6 1.0 1.4 1.8 -50 0 50 100 150 T j , Junction Temperature ( o C) Normalized RDS(ON) I D = - 26 A V G =-10V 0.0 0.5 1.0 1.5 2.0 -50 0 50 100 150 T j , Junction Temperature ( o C) Normalized VGS(th) 0.0 6.5 13.0 19.5 26.0 -V SD , Source-to-Drain Voltage (V) -IS(A) T j =25 o CT j =150 o C 02468 -V DS , Drain-to-Source Voltage (V) -ID , Drain Current (A) T C = 150o C -10V -7.0V -6.0V -5.0V V G =-4. 0V 2468 1 0 -V GS , Gate-to-Source Voltage (V) RDS(ON) (m I D = - 16 A T C =25 ℃

Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform Q VG -4.5V QGS QGD QG Charge 400 800 1200 1600 2000 1 5 9 13 17 21 25 29 -V DS , Drain-to-Source Voltage (V) C (pF) f=1.0MHz C iss C oss C rss 0 1 02 03 04 0 Q G , Total Gate Charge (nC) -VGS , Gate to Source Voltage (V) I D = -26 A V DS = -25 V 100 1000 0.1 1 10 100 -V DS , Drain-to-Source Voltage (V) -ID (A) T C =25 o C Single Pulse 100us 1ms 10ms 100ms DC 0.01 0.1 t , Pulse Width (s) Normalized Thermal Response (Rthjc) PDM Duty factor = t/T Peak Tj = PDM x Rthjc + TC t T 0.02 0.01 0.05 0.1 0.2 Duty factor=0.5 Single Pulse td(on) tr td(off)tf VDS VGS 10% 90%

for low voltage MOSFET only4435GJ YWWSSS Date Code (YWWSSS) Y：Last Digit Of The Year WW：Week SSS：Sequence Part Number Package Code Date Code (YWWSSS) Y：Last Digit Of The Year WW：Week SSS：Sequence 4435GH YWWSSS meet Rohs requirement for low voltage MOSFET only.