AP3405GH-HF A-POWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Advanced Power P-CHANNEL ENHANCEMENT MODE Electronics Corp. POWER MOSFET ▼ Lower Gate Charge BVDSS -30V ▼ Simple Drive Requirement RDS(ON) 90mΩ ▼ Fast Switching Characteristic ID -8.6A ▼ RoHS Compliant & Halogen-Free

Description

ID@TC=25℃ A ID@TC=100℃ A IDM A PD@TC=25℃ W PD@TA=25℃ W TSTG ℃ TJ ℃ Symbol Value Units Rthj-c Maximum Thermal Resistance Junction-case 12.0 ℃/W Rthj-a 62.5 ℃/W Data and specifications subject to change without notice Total Power Dissipation 2 Maximum Thermal Resistance, Junction-ambient (PCB mount)3 200908101 Parameter AP3405GH-HF Rating -30 +20 -8.6 Halogen-Free Product Continuous Drain Current, VGS @ 10V -5.4 Parameter Drain-Source Voltage Gate-Source Voltage Continuous Drain Current, V GS @ 10V -55 to 150 Pulsed Drain Current1 -20 Thermal Data -55 to 150 10.4Total Power Dissipation Operating Junction Temperature Range Storage Temperature Range G D S Advanced Power MOSFETs from APEC provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. The TO-252 package is widely preferred for commercial-industrial surface mount applications and suited for low voltage applications such as DC/DC converters. G D S TO-252(H)

Electrical Characteristics@Tj=25oC(unless otherwise specified) Symbol Parameter Test Conditions Min. Typ. Max. Units BVDSS Drain-Source Breakdown Voltage V GS=0V, ID=-250uA -30 - - V RDS(ON) Static Drain-Source On-Resistance2 VGS=-10V, ID=-6A - - 90 m Ω VGS=-4.5V, ID=-4A - - 130 m Ω VGS(th) Gate Threshold Voltage V DS=VGS, ID=-250uA -1 - -3 V gfs Forward Transconductance V DS=-10V, ID=-6A - 7 - S IDSS Drain-Source Leakage Current VDS=-30V, VGS=0V - - -25 uA IGSS Gate-Source Leakage V GS= +20V, VDS=0V - - + 100 nA Qg Total Gate Charge2 ID=-6A - 4.6 7.4 nC Qgs Gate-Source Charge V DS=-24V - 1.1 - nC Qgd Gate-Drain ("Miller") Charge V GS=-4.5V - 2.7 - nC td(on) Turn-on Delay Time2 VDS=-15V - 6 - ns tr Rise Time I D=-6A - 18 - ns td(off) Turn-off Delay Time R G=3.3Ω,VGS=-10V - 17 - ns tf Fall Time R D=2.5Ω - 4.3 - ns Ciss Input Capacitance V GS=0V - 290 465 pF Coss Output Capacitance V DS=-25V - 60 - pF Crss Reverse Transfer Capacitance f=1.0MHz - 50 - pF Rg Gate Resistance f=1.0MHz - 6 - Ω Source-Drain Diode Symbol Parameter Test Conditions Min. Typ. Max. Units VSD Forward On Voltage2 IS=-6A, VGS=0V - - -1.2 V trr Reverse Recovery Time2 IS=-6A, VGS=0V, - 18 - ns Qrr Reverse Recovery Charge dI/dt=-100A/µs - 11 - nC Notes: 1.Pulse width limited by Max. junction temperature. 2.Pulse test THIS PRODUCT IS SENSITIVE TO ELECTROSTATIC DISCHARGE, PLEASE HANDLE WITH CAUTION. USE OF THIS PRODUCT AS A CRITICAL COMPONENT IN LIFE SUPPORT OR OTHER SIMILAR SYSTEMS IS NOT AUTHORIZED. APEC DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. APEC RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. 3.Surface mounted on 1 in2 copper pad of FR4 board

Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance v.s. Junction Temperature Fig 5. Forward Characteristic of Fig 6. Gate Threshold Voltage v.s. Reverse Diode Junction Temperature 02468 1 0 -V DS , Drain-to-Source Voltage (V) -ID , Drain Current (A) T C =2 5o C -10V -7.0 V -6.0 V -5.0 V V G = - 4.0 V 012345 -V DS , Drain-to-Source Voltage (V) -ID , Drain Current (A) -10V -7.0V -6.0V -5.0V V G = - 4.0 V T C = 150o C 100 110 120 2468 1 0 -V GS , Gate-to-Source Voltage (V) RDS(ON) (m I D =- 4A T C =25 ℃ 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 -50 0 50 100 150 T j , Junction Temperature ( o C) Normalized RDS(ON) I D = -6A V G = -10V 0.4 0.6 0.8 1.2 1.4 1.6 -50 0 50 100 150 T j , Junction Temperature ( o C) Normalized -VGS(th) (V) -V SD , Source-to-Drain Voltage (V) -IS(A) T j =25 o CT j =150 o C

Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform td(on) tr td(off)tf VDS VGS 10% 90% Q VG -4.5V QGS QGD QG Charge 02468 Q G , Total Gate Charge (nC) -VGS , Gate to Source Voltage (V) V DS =-24V I D =-6A 100 200 300 400 500 600 1 5 9 1 31 72 12 52 9 -V DS , Drain-to-Source Voltage (V) C (pF) f=1.0MHz C iss C oss C rss 0.1 100 0.1 1 10 100 -V DS , Drain-to-Source Voltage (V) -ID (A) T C =25 o C Single Pulse 100us 1ms 10ms 100ms DC 0.01 0.1 t , Pulse Width (s) Normalized Thermal Response (Rthjc) PDM Duty factor = t/T Peak Tj = PDM x Rthjc + TC t T 0.02 0.01 0.05 0.1 0.2 Duty factor=0.5 Single Pulse Operation in this area limited by RDS(ON)