AP2610GY-HF A-POWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Advanced Power N-CHANNEL ENHANCEMENT MODE Electronics Corp. POWER MOSFET ▼ Fast Switching Characteristic BVDSS 60V ▼ Lower Gate Charge RDS(ON) 90mΩ ▼ Small Footprint & Low Profile Package ID 3.5A ▼ Halogen Free & RoHS Compliant Product

Description

ID@TA=25℃ A ID@TA=70℃ A IDM A PD@TA=25℃ W TSTG ℃ TJ ℃ Symbol Value Unit Rthj-a Maximum Thermal Resistance, Junction-ambient 3 62.5 ℃/W Data and specifications subject to change without notice AP2610GY-HF Halogen-Free Product Parameter Rating Drain-Source Voltage 60 Gate-Source Voltage + Continuous Drain Current3, VGS @ 10V 3.5 Storage Temperature Range Continuous Drain Current3, VGS @ 10V 2.8 Pulsed Drain Current1 14 Total Power Dissipation 2 -55 to 150 Operating Junction Temperature Range -55 to 150 201008231 Thermal Data Parameter G D S Advanced Power MOSFETs utilized advanced processing techniques to achieve the lowest possible on-resistance, extremely efficient and cost-effectiveness device. The S0T-26 package is widely used for commercial-industrial surface mount applications. D D D D G S SOT-26

Electrical Characteristics@Tj=25oC(unless otherwise specified) Symbol Parameter Test Conditions Min. Typ. Max. Units BVDSS Drain-Source Breakdown Voltage V GS=0V, ID=250uA 60 - - V RDS(ON) Static Drain-Source On-Resistance2 VGS=10V, ID=3A - - 90 m Ω VGS=4.5V, ID=2A - - 120 m Ω VGS(th) Gate Threshold Voltage V DS=VGS, ID=250uA 1 - 3 V gfs Forward Transconductance V DS=10V, ID=3A - 8 - S IDSS Drain-Source Leakage Current VDS=48V, VGS=0V - - 25 uA Drain-Source Leakage Current (Tj=70oC) VDS=48V ,VGS=0V - - 100 uA IGSS Gate-Source Leakage V GS=+20V, VDS=0V - - + 100 nA Qg Total Gate Charge2 ID=3A - 6.5 10.4 nC Qgs Gate-Source Charge V DS=48V - 1.5 - nC Qgd Gate-Drain ("Miller") Charge V GS=4.5V - 3 - nC td(on) Turn-on Delay Time2 VDS=30V - 5.5 - ns tr Rise Time I D=1A - 5.5 - ns td(off) Turn-off Delay Time R G=3.3Ω -1 6- ns tf Fall Time V GS=10V - 4 - ns Ciss Input Capacitance V GS=0V - 550 880 pF Coss Output Capacitance V DS=25V - 60 - pF Crss Reverse Transfer Capacitance f=1.0MHz - 40 - pF Rg Gate Resistance f=1.0MHz - 1 - Ω Source-Drain Diode Symbol Parameter Test Conditions Min. Typ. Max. Units VSD Forward On Voltage2 IS=1.5A, VGS=0V - - 1.3 V trr Reverse Recovery Time2 IS=3A, VGS=0V, - 24 - ns Qrr Reverse Recovery Charge dI/dt=100A/µs - 27 - nC Notes: 1.Pulse width limited by Max. junction temperature. 2.Pulse test 3.Surface mounted on 1 in 2 copper pad of FR4 board t ≦ 10S ; 156℃/W when mounted on min. copper pad. THIS PRODUCT IS SENSITIVE TO ELECTROSTATIC DISCHARGE, PLEASE HANDLE WITH CAUTION. USE OF THIS PRODUCT AS A CRITICAL COMPONENT IN LIFE SUPPORT OR OTHER SIMILAR SYSTEMS IS NOT AUTHORIZED. APEC DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. APEC RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. AP2610GY-HF

Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance v.s. Junction Temperature Fig 5. Forward Characteristic of Fig 6. Normalized Gate Threshold Reverse Diode Voltage v.s. Junction Temperature 0.3 0.5 0.7 0.9 1.1 1.3 1.5 -50 0 50 100 150 T j , Junction Temperature ( o C ) Normalized VGS(th)(V) 02468 1 0 V DS , Drain-to-Source Voltage (V) ID , Drain Current (A) 10V 7.0V 6.0V 5.0V V G =4.0V T A =25 o C 02468 1 0 V DS , Drain-to-Source Voltage (V) ID , Drain Current (A) T A =150 o C 10V 7.0V 6.0V 5.0V V G =4.0V 0.4 0.8 1.2 1.6 2.0 2.4 -50 0 50 100 150 T j , Junction Temperature ( o C) Normalized RDS(ON) I D =3A V G =10V V SD , Source-to-Drain Voltage (V) IS(A) T j =25 o CT j =150 o C 100 2468 1 0 V GS Gate-to-Source Voltage (V) RDS(ON) (m I D =2A T A =25 o C

Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform Q VG 4.5V QGS QGD QG Charge 200 400 600 800 1 5 9 13 17 21 25 29 V DS , Drain-to-Source Voltage (V) C (pF) f=1.0MHz C iss C oss C rss 0.001 0.01 0.1 0.0001 0.001 0.01 0.1 1 10 100 1000 t , Pulse Width (s) Normalized Thermal Response (Rthja) 0.01 0.05 0.1 0.2 Duty factor=0.5 Single Pulse PDM Duty factor = t/T Peak Tj = PDM x Rthja + Ta Rthja = 156℃/W t T 02468 1 0 1 2 Q G , Total Gate Charge (nC) VGS , Gate to Source Voltage (V) I D =3A V DS =48V 0.001 0.01 0.1 100 0.01 0.1 1 10 100 1000 V DS , Drain-to-Source Voltage (V) ID (A) 100us 1ms 10ms 100ms DC T A =25 o C Single Pulse td(on) tr td(off) tf VDS VGS 10% 90% 0.02 Operation in this area limited by RDS(ON)