AP2602GY A-POWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Advanced Power N-CHANNEL ENHANCEMENT MODE Electronics Corp. POWER MOSFET ▼ Capable of 2.5V gate drive BVDSS 20V ▼ Lower on-resistance RDS(ON) 34mΩ ▼ Surface mount package ID 6.3A ▼ RoHS Compliant

Description

ID@TA=25℃ A ID@TA=70℃ A IDM A PD@TA=25℃ W W/℃ TSTG ℃ TJ ℃ Symbol Value Unit Rthj-a Thermal Resistance Junction-ambient 3 Max. 62.5 ℃/W Data and specifications subject to change without notice 200629051-1/4 AP2602GY Pb Free Plating Product Parameter Rating Drain-Source Voltage 20 Gate-Source Voltage ±12 Continuous Drain Current 3, VGS @ 4.5V 6.3 Continuous Drain Current3, VGS @ 4.5V 5 Pulsed Drain Current1,2 30 Total Power Dissipation 2 -55 to 150 Operating Junction Temperature Range -55 to 150 Linear Derating Factor 0.016 Thermal Data Parameter Storage Temperature Range G D S Advanced Power MOSFETs utilized advanced processing techniques to achieve the lowest possible on-resistance, extremely efficient and cost-effectiveness device. The SOT-26 package is universally used for all commercial-industrial applications. D D D D G S SOT-26

Electrical Characteristics@Tj=25oC(unless otherwise specified) Symbol Parameter Test Conditions Min. Typ. Max. Units BVDSS Drain-Source Breakdown Voltage V GS=0V, ID=250uA 20 - - V ΔBVDSS/ΔTj Breakdown Voltage Temperature Coefficient Reference to 25℃, ID=1mA - 0.1 - V/ ℃ RDS(ON) Static Drain-Source On-Resistance2 VGS=10V, ID=5.5A - - 30 mΩ VGS=4.5V, ID=5.3A - - 34 mΩ VGS=2.5V, ID=2.6A - - 50 mΩ VGS=1.8V, ID=1.0A - - 90 mΩ VGS(th) Gate Threshold Voltage V DS=VGS, ID=250uA 0.5 - - V gfs Forward Transconductance V DS=5V, ID=5.3A - 13 - S IDSS Drain-Source Leakage Current (Tj=25oC) VDS=20V, VGS=0V - - 1 uA Drain-Source Leakage Current (Tj=55oC) VDS=16V ,VGS=0V - - 10 uA IGSS Gate-Source Leakage V GS=- - nA Qg Total Gate Charge2 ID=5.3A - 8.7 16 nC Qgs Gate-Source Charge V DS=10V - 1.5 - nC Qgd Gate-Drain ("Miller") Charge V GS=4.5V - 3.6 - nC td(on) Turn-on Delay Time2 VDS=15V - 6 - ns tr Rise Time I D=1A - 14 - ns td(off) Turn-off Delay Time R G=2Ω,VGS=10V - 18.4 - ns tf Fall Time R D=15Ω - 2.8 - ns Ciss Input Capacitance V GS=0V - 603 1085 pF Coss Output Capacitance V DS=15V - 144 - pF Crss Reverse Transfer Capacitance f=1.0MHz - 111 - pF Source-Drain Diode Symbol Parameter Test Conditions Min. Typ. Max. Units VSD Forward On Voltage2 IS=1.2A, VGS=0V - - 1.2 V trr Reverse Recovery Time2 IS=5A, VGS=0V, - 16.8 - ns Qrr Reverse Recovery Charge dI/dt=100A/µs - 11 - nC Notes: 1.Pulse width limited by Max. junction temperature. 2.Pulse width <300us , duty cycle <2%. 3.Surface mounted on 1 in2 copper pad of FR4 board ; 156℃/W when mounted on min. copper pad. AP2602GY ± 12V ±100

Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance v.s. Junction Temperature Fig 5. Forward Characteristic of Fig 6. Gate Threshold Voltage v.s. Reverse Diode Junction Temperature 01234567 V DS , Drain-to-Source Voltage (V) ID , Drain Current (A) T A =25 o C V G =2.5V 4.0V 5.0V 4.5V 012345678 V DS , Drain-to-Source Voltage (V) ID , Drain Current (A) T A =150 o C 4.0V V G =2.5V 4.5V 5.0V 0.01 0.1 0 0.4 0.8 1.2 1.6 V SD , Source-to-Drain Voltage (V) IS (A) T j =25 o CT j =150 o C 0.2 0.6 1.4 -50 0 50 100 150 T j , Junction Temperature ( o C ) VGS(th)(V) 0.6 1.0 1.4 1.8 -50 0 50 100 150 T j , Junction Temperature ( o C) Normalized RDS(ON) I D =5.3A V G =4.5V 100 147 1 0 V GS , Gate-to-Source Voltage (V) RDS(ON) (m I D = 1.0 A T A =25 o C

Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform 0 5 10 15 20 25 Q G , Total Gate Charge (nC) VGS , Gate to Source Voltage (V) I D =5.3A V DS =16V 100 1000 1 5 9 13 17 21 25 29 V DS , Drain-to-Source Voltage (V) C (pF) f=1.0MHz C iss C oss C rss 0.001 0.01 0.1 0.0001 0.001 0.01 0.1 1 10 100 1000 t , Pulse Width (s) Normalized Thermal Response (Rthja) 0.01 0.05 0.1 0.2 Duty factor=0.5 Single Pulse PDM Duty factor = t/T Peak Tj = PDM x Rthja + Ta Rthja = 156℃/W t T td(on) tr td(off) tf VDS VGS 10% 90% Q VG 4.5V QGS QGD QG Charge 0.01 0.1 100 0.1 1 10 100 V DS , Drain-to-Source Voltage (V) ID (A) 1ms 10ms 100ms DC T A =25 o C Single Pulse