AM4953 BCDSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 16

Technical content

Features

  • BTL Output Single-phase Full-wave Linear Drive (Gain Resistor=1k to 360kΩ, Gain=51dB)
  • Support Low-voltage Drive and Feature a Wide Usable V oltage Range (2.2V to 16V)
  • Low Saturation Output (High Side and Low Side Saturation V oltage): V SAT_TOTAL=1.2V (typical, IOUT=300mA)
  • Built-in Lock Protection and Automatic Restart Circuits
  • Built-in FG/RD Output
  • Built-in Hall Sensor Bias (V HB=1.45V)
  • Thermal Protection Circuit
  • Small-sized, High Thermal Capacity Package

Applications

  • Notebook, Personal Computers
  • Power Supplies in Consumer Electronics, Car Audio
  • CPU Cooling Systems M S O P - 1 0 S S O P - 1 0 M S O P - 8 S O I C - 8 P S O P - 8

Figure 1. Package Types of AM4953

Figure 2. Pin Configuration of AM4953 (Top View)

Figure 3. Functional Block Diagram of AM4953

BTL Drive Single-phase Full-wave Fan Motor Driver AM4953 Aug. 2011 Rev. 1. 2 BCD Semiconductor Manufacturing Limited TR: Tape & Reel Blank: Tube

Ordering Information

Signal Part Number Marking ID Packing Type AM4953MM-G1 4953MM-G1 Tube MSOP-10 FG & RD AM4953MMTR-G1 4953MM-G1 Tape & Reel AM4953GS-G1 4953GS-G1 Tube SSOP-10 FG & RD AM4953GSTR-G1 4953GS-G1 Tape & Reel AM4953M8-G1 4953M8-G1 Tube MSOP-8 RD AM4953M8TR-G1 4953M8-G1 Tape & Reel AM4953FM-G1 4953FM-G1 Tube SOIC-8 FG AM4953FMTR-G1 4953FM-G1 Tape & Reel AM4953FMP-G1 4953FMP-G1 Tube PSOP-8 -40 to 105ºC FG AM4953FMPTR-G1 4953FMP-G1 Tape & Reel BCD Semiconductor's Pb-free products, as designated with "G1" suffix in the part number, are RoHS compliant and green. G1: Green Output Signal: Blank: FG&RD/RD F: FG P a c k a g e : MM: MSOP-10 GS : SSOP-10 M8: MSOP-8 M: SOIC-8 MP: PSOP-8 Circuit Type

BTL Drive Single-phase Full-wave Fan Motor Driver AM4953 Aug. 2011 Rev. 1. 2 BCD Semiconductor Manufacturing Limited Absolute Maximum Ratings (Note 1, TA=25ºC) Parameter Symbol Value Unit Supply V oltage V CC 20 V Peak Output Current I OUT 800 mA FG/RD Pull-up V oltage V FG/VRD 15 V FG/RD Output Current I FG/IRD 10 mA MSOP-10 MSOP-8 585 SSOP-10 800 SOIC-8 780 Power Dissipation P D PSOP-8 960 mW Operating Temperature T OP -40 to 125 ºC Storage Temperature T STG -55 to 150 ºC ESD (Human Body Model) ESD 4000 V ESD (Machine Model) ESD 200 V Note 1: Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “Recommended Operating Co nditions” is not implied. Exposure to “Absolute Maximum Ratings” for extended periods may affect device reliability. Recommended Operating Conditions Parameter Symbol Min Max Unit Supply V oltage V CC 2.2 16 V Hall Input V oltage V ICM 0 V CC-1.5 V Operating Ambient Temperature T A -40 105 ºC

BTL Drive Single-phase Full-wave Fan Motor Driver AM4953 Aug. 2011 Rev. 1. 2 BCD Semiconductor Manufacturing Limited

Electrical Characteristics

VCC=12V, TA=25oC, unless otherwise specified. Parameter Symbol Conditions Min Typ Max Unit ICC1 V CT=L 6 8 9.6 mA Supply Current ICC2 V CT=H 2 4 6 mA CT Charge Current I CHG 1 1.7 2.5 μA CT Discharge Current I DHG 0.15 0.27 0.36 μA CT Charge/Discharge Current Ratio RCT I CHG / IDHG 5 7 10 CT Clamp V oltage V CL 1.25 1.45 1.65 V CT Comparator V oltage V CP 0.25 0.45 0.65 V OUT Low Saturation V oltage V SAT_L I OUT=300mA 0.25 0.45 V OUT High Saturation V oltage V SAT_H I OUT=300mA 0.95 1.3 V Hall Input Sensitivity V HN 8 20 mV FG Low Level V oltage V FG I FG=5mA 0.15 0.3 V FG Leakage Current I FGL V FG=15V 1 10 μA RD Low Level V oltage V RD I RD=5mA 0.15 0.3 V RD Leakage Current I RDL V RD=15V 1 10 μA HB V oltage V HB I HB=5mA 1.3 1.45 1.6 V

BTL Drive Single-phase Full-wave Fan Motor Driver AM4953 Aug. 2011 Rev. 1. 2 BCD Semiconductor Manufacturing Limited Truth Table Items IN- IN+ CT OUT1 OUT2 FG RD Mode

1 H L H L L

2 L H

L L H H L Purring Rotation

3 H Off OFF H Lock Protection

power supply line, C1 will also be necessary to improve reliability. Its capacity should be larger than 2.2μF. Note 3: If the line between Hall sensor output and Hall sensor input of IC is long, the noise may occur in this line. But it can be eliminated by adding a capacitor C3. Note 5: The package of AH921 is SOT-23-3. If it is packaged in TO-92S-3，please exchange IN- with IN+. Figure 11. Typical Application of AM4953

BTL Drive Single-phase Full-wave Fan Motor Driver AM4953 Aug. 2011 Rev. 1. 2 BCD Semiconductor Manufacturing Limited Mechanical Dimensions MSOP-10 Unit: mm(inch)

BTL Drive Single-phase Full-wave Fan Motor Driver AM4953 Aug. 2011 Rev. 1. 2 BCD Semiconductor Manufacturing Limited Mechanical Dimensions (Continued) S S O P - 1 0 U n i t : m m ( i n c h ) 3.800(0.150) 4.000(0.157) 4.700(0.185) 5.100(0.201) 0.300(0.012) 0.450(0.018) 5.800(0.228) 6.200(0.244) 1.350(0.053) 1.550(0.061) 1.000(0.039) BSC 1.350(0.053) 1.750(0.069) 0.100(0.004) 0.250(0.010) 0.170(0.007) 0.250(0.010) 0.400(0.016) 1.270(0.050) 0

BTL Drive Single-phase Full-wave Fan Motor Driver AM4953 Aug. 2011 Rev. 1. 2 BCD Semiconductor Manufacturing Limited Mechanical Dimensions (Continued) M S O P - 8 U n i t : m m ( i n c h )

BTL Drive Single-phase Full-wave Fan Motor Driver AM4953 Aug. 2011 Rev. 1. 2 BCD Semiconductor Manufacturing Limited Mechanical Dimensions (Continued) S O I C - 8 U n i t : m m ( i n c h ) R0.150(0.006) R0.150(0.006) 1.000(0.039) 0.330(0.013) 0.510(0.020) 1.350(0.053) 1.750(0.069) 0.100(0.004) 0.300(0.012) 0.900(0.035) 0.800(0.031) 0.200(0.008) 3.800(0.150) 4.000(0.157) 20:1 D 1.270(0.050) TYP 0.190(0.007) 0.250(0.010) D 5.800(0.228) 6.200(0.244) 0.675(0.027) 0.725(0.029) 0.320(0.013) 0.450(0.017) 0.800(0.031) 4.700(0.185) 5.100(0.201) Note: Eject hole, oriented hole and mold mark is optional.

BTL Drive Single-phase Full-wave Fan Motor Driver AM4953 Aug. 2011 Rev. 1. 2 BCD Semiconductor Manufacturing Limited Mechanical Dimensions (Continued) P S O P - 8 U n i t : m m ( i n c h ) 3.202(0.126) 3.402(0.134)

BCD Semiconductor Manufacturing Limited reserves the right to make changes without further notice to any products or specifi- cations herein. BCD Semiconductor Manufacturing Limited does not assume any responsibility for use of any its products for any particular purpose, nor does BCD Semiconductor Manufacturing Limited assume any liability arising out of the application or use of any its products or circuits. BCD Semiconductor Manufacturing Limited does not convey any license under its patent rights or other rights nor the rights of others. - Wafer Fab Shanghai SIM-BCD Semiconductor Manufacturing Limited 800, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6485 1491, Fax: +86-21-5450 0008 BCD Semiconductor Manufacturing Limited MAIN SITE REGIONAL SALES OFFICE Shenzhen Office Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. Shenzhen Office Advanced Analog Circuits (Shanghai) Corporation Shenzhen Office Room E, 5F, Noble Center, No.1006, 3rd Fuzhong Road, Futian District, Shenzhen 518026, China Tel: +86-755-8826 7951 Fax: +86-755-8826 7865 Taiwan Office BCD Semiconductor (Taiwan) Company Limited 4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, Taiwan Tel: +886-2-2656 2808 Fax: +886-2-2656 2806 USA Office BCD Semiconductor Corporation 30920 Huntwood Ave. Hayward, CA 94544, U.S.A Tel : +1-510-324-2988 Fax: +1-510-324-2788 - IC Design Group Advanced Analog Circuits (Shanghai) Corporation 8F, Zone B, 900, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6495 9539, Fax: +86-21-6485 9673 BCD Semiconductor Manufacturing Limited http://www.bcdsemi.com BCD Semiconductor Manufacturing Limited IMPORTANT NOTICE BCD Semiconductor Manufacturing Limited reserves the right to make changes without further notice to any products or specifi- cations herein. BCD Semiconductor Manufacturing Limited does not assume any responsibility for use of any its products for any particular purpose, nor does BCD Semiconductor Manufacturing Limited assume any liability arising out of the application or use of any its products or circuits. BCD Semiconductor Manufacturing Limited does not convey any license under its patent rights or other rights nor the rights of others. - Wafer Fab Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd.

800 Yi Shan Road, Shanghai 200233, China

Tel: +86-21-6485 1491, Fax: +86-21-5450 0008 MAIN SITE REGIONAL SALES OFFICE Shenzhen Office Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd., Shenzhen Office Unit A Room 1203, Skyworth Bldg., Gaoxin Ave.1.S., Nanshan District, Shenzhen, China Tel: +86-755-8826 7951 Fax: +86-755-8826 7865 Taiwan Office BCD Semiconductor (Taiwan) Company Limited 4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, Taiwan Tel: +886-2-2656 2808 Fax: +886-2-2656 2806 USA Office BCD Semiconductor Corp. 30920 Huntwood Ave. Hayward, CA 94544, USA Tel : +1-510-324-2988 Fax: +1-510-324-2788 - Headquarters BCD Semiconductor Manufacturing Limited No. 1600, Zi Xing Road, Shanghai ZiZhu Science-based Industrial Park, 200241, China Tel: +86-21-24162266, Fax: +86-21-24162277