AGH100-48S3V3P-4L ARTESYN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Half Brick Fully Regulated DCDC Converter Output Power: 82.5 Watts Input Voltage: 36 - 75 V Single Output: 3.3 V SPECIAL FEATURES 2:1 wide input range Optimised for high density, small space applications Low ripple and noise Fixed switching frequency High efficiency High capacitive load capability Basic insulation system Pre-bias start-up capability Openframe structure with Baseplate option SAFETY UL, cUL: UL60950 TUV/CE: IEC/EN60950 Electrical Specifications Input Input ra nge 36 - 75 VDC Input surge 100 V for 100 ms Efficiency 92.4% (3.3 V) Output Output voltage 3.3 Vdc Trim range +10% to =20% Vout Output current 25 A Noise/ripple 45 mV pk-pk Regulation Load regulation 16.5 mV, Line regulation = 6.6 mV Switching frequency Fixed switching frequency 270 KHz Isolation voltage 2000 Vdc Transient response 80 mV deviation 80 µs recovery (25% deviation from 50% Iout, 0.1 A/µs) typical Control Enable TTL compatible Positive or Negative enable Data Sheet Environmental Specifications Operating ambient temperature range -40 °C to +85 °C Storage temperature -55 °C to +125 °C OTP 118 °C MTBF @ 25 °C 2 Million hours (Vin 48 V, Io = 20 A
2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 Asia (HK) 14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon Hong Kong +852 2176 3333 For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com www.artesyn.com While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2015 Artesyn Embedded Technologies, Inc. Mechanical Drawing - Open Frame 35.56 [1.400] 50.8 [2.000] 61.0[2.402] 15.24 [0.600] 35.56 [1.400] 50 8 [2 000] 48.26 [1.900] 57.9 [2.280] L 7.62 [0.300] 10.0 [0.394] 4-Ф4.3 Bottom view Side view 7-Ф1.0±0.1 7-Ф2.0±0.1 Load board 2-Ф2.0±0.1 Unit: mm[inch] Bottom view: pin on upside
Ordering Information
Model number Input voltage Output voltage Power Efficiency AGH100-48S3V3P-4L 48 V 3.3 V 25 A 92.4% AGH100-48S3V3-4L 48 V 3.3 V 25 A 92.4% AGH100-48S3V3PB-4L 48 V 3.3 V 25 A 92.4% AGH100-48S3V3B-4L 48 V 3.3 V 25 A 92.4% - Standard converter is Negative enable - “B” = Baseplate option - “-4” = 4.8 mm pin length - “-P” = Positive remote control - “-L” = RoHS 6 compliant Pin Assignments Pin # Function 1 +V in
2 Enable
3 Case
7 Trim
Notes: 1. 20 MHz bandwidth. External 10 uF tantalum capacitor placed across +Vout and –Vout; 33 uF e-cap or equivalent placed across +Vin and –Vin. 2. Efficiency measurements taken at full load and nominal line and Tamb = 25 °C 3. All specifications taken at nominal line, full load and Tamb = 25 °C unless otherwise noted. 4. Mechanical dimensions are for reference only. Dimensions are in MM. Mechanical tolerance = +/- 0.5 mm 5. Technical reference notes should be consulted for detailed information when available. 6. All specifications subject to change without notice. 7. Warranty 2 years. 8. The through-hole terminated modules are intended for wave-soldering process; special request for other manufacturing processes to be made to Artesyn.