9224

9224 ENERCON | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 3

Technical content

Compact 24 Port Military Managed Gigabit Ethernet Switch

FEATURES

Driven by rapid advancement and lower costs, Ethernet is becoming the standard for IP-based components in a wide range of military and commercial applications, including:

• Vetronics
• Manned and unmanned vehicles
• Aerial environments The MIL TECH 9224 is a MIL-STD, fully managed military grade network switch offering 24 triple-speed (10/100/1000Mbps) connections. It can be remotely managed to optimize communications and prioritize critical information traffic. Advanced network features, never before found in a package of this size, include switching protocols, virtual LANS (VLANS), traffic prioritization (QoS), and bandwidth aggregation are standard. The MIL TECH 9224 offers combination of size, weight, power and cost (SWaP-C). It saves valuable real estate for computers, sensors, targeting systems, and other devices. The MIL TECH9224’s gigabit speeds and 24VDC power make it instantly compatible with any network device and power systems in these mobile platforms. The MIL TECH9224 can be used in battlefield communications C4ISR, video, sensor data acquisition and transmission. Its mechanical packaging enhancements, including two rugged D38999 circular connectors, is designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. Leveraging best-in class switching technology, the MIL TECH 9224 serves as a robust commercial off-theshelf (COTS) solution for rugged LAN connectivity. Networking Products SPECIFICATIONS NETWORKING • Energy efficient Ethernet, IEEE 802.3az
• Wire-speed hardware-based 24 ports
• L3-Static Routing capabilities.
• IEEE-1588 Capabilities and Synchronous Ethernet (SyncE)
• Broadcasting and flooding Control up to 8K Groups
• 802.1q Tagged based VLAN up to 4K VLAN groups
• Bridge Support for VLAN Q-in-Q
• Link Aggregation 802.3ad
• WEB, CLI, Telnet , SNMP V2/V3 management
• QoS Multi-Layer Classifier: 802.1p, EtherType
• VLAN-ID, IPv4/6 DSCP/ToS, and UDP/TCP ports & ranges traffic classification
• DSCP remarking for both IPv4 and IPv6 frames
• Multiple ACLs per port for optimal usage of Content Aware Policers
• Storm controllers for flooded broadcast, multicast and unicast
• Spanning Tree (802.1d), RSTP (802.1w) and multiple Spanning Tree (802.1S) for fast recovery rings
• Multicasting (IGMP Snooping), GARP , GMRP , MLD and GVRP up to 8K groups for both IPv4 and IPv6
• Up to 4K egress VLAN tag operations ETHERNET PORTS • 24 x 10/100/1000TX ports managed Ethernet Switch 1 | 52022 Ask us about our complete line of power and networking products. Netanya, Israel • +972 73 246 9200 • sales@enercon.co.il www.enercon.co.il

Compact 24 Port Military Managed Gigabit Ethernet Switch SPECIFICATIONS NETWORKING QUALITY OF SERVICE SECURITY

• QoS Multi-Layer Classifier: 802.1p, EtherType,
• VLAN-ID, IPv4/6 DSCP/ToS, and UDP/TCP ports & ranges traffic classification.
• Per port WFQ and Strict Queuing scheduling
• DSCP remarking for both IPv4 and IPv6 frames
• Ingress policer and ingress shaper per port with 500Kbps granularity
• Egress shaper per port with 500Kbps granularity
• Full-duplex flow control (IEEE802.3X) and half-duplex backpressure
• Security via Radius Authentication 802.1x, Port / MAC access control
• Port Security
• Per port ingress and egress port mirroring
• Mirroring per VLAN
• Private VLAN support per VLAN (Isolated and Promiscuous ports)
• Advanced ACL through hardware based match patterns
• Content Aware Policers for generic MAC, ARP , IPv4, IPv6 protocols
• Content Aware Policers actions are permit/deny, police, count
• Multiple ACLs per port for optimal usage of Content Aware Policers
• Storm controllers for flooded broadcast, multicast and unicast 2 | 52022 PERFORMANCE POWER ELECTROMAGNETIC SHOCK/VIBRATION/ HUMIDITY
• 253.4 Mpps wire speed forwarding rate
• 128 Gbps maximum forwarding bandwidth
• 8K MAC Address
• 24VDC (18Vdc – 32Vdc)
• Power Consumption: 33W Typical
• MIL-STD-461F Electromagnetic compatibility
• CS-114, CS-115, CS-116, RE-101, RE-102, RS-101, RS-103, ESD
• MIL-STD-810G: Humidity (507.5) | Altitude (500.4I,II) | Temp.(501.5I,II) | Drip, Vibration (167-1A) Shocks (516.6I) | Transportation (514.6,4,10) | Salt-fog (509.5) STANDARDS • MIL-STD-1275E | MIL-STD-704A | MIL-STD-461F | MIL-STD-810G | IP67 COOLING OPERATING TEMP STORAGE TEMP
• No Moving Parts. Passive Cooling.
• -45ºC to +80ºC (-49ºF to +176ºF) Cold Start-Up
• -45ºC to +85ºC (-49ºF to +185ºF) Ask us about our complete line of power and networking products. Netanya, Israel • +972 73 246 9200 • sales@enercon.co.il www.enercon.co.il

Compact 24 Port Military Managed Gigabit Ethernet Switch SPECIFICATIONS

ORDERING INFORMATION

PHYSICAL • Dimensions:243.5mm (L) x 72.9mm (W) x 94mm (H)

• Dimensions: 9.6’’ (L) x 2.87’’ (W) x 3.7’’ (H)
• Weight: 1.3Kg PART NUMBER DESCRIPTION 1-9224-000 24 x 10/100/1000TX Ports Managed Ethernet Switch CONNECTORS • 1 x Power Connector Type: MIL-D-38999: 88-569781-35P
• 6 x LAN Connector Type: MIL-D-38999: TV07W-LI-15-35-S-F311
• 1 x Management Connector Type: MIL-D-38999: 88-569782-35S 3 | 52022 A C B 38.0 52.5 52.5 243.5 94.0 (x2) 50.0 (x2) 235.5 (x4) 4.8 0.1 0.0 HOLE FOR SCREW #8-32UNC 43.0 26.3 GND #8-32UNC INDICATORS Led's 72.9 225.5 (x6) TV07W-LI-15-35-S-F311 Socapex With Dust Cap AMPHENOL NAME PLATE 88-569781-35P With Dust Cap AMPHENOL 88-569782-35S With Dust Cap AMPHENOL Sealing Screw M5 (With O-Ring) NOTES: 2. DIMENSIONS: 2.3 3. FINISH:

3.2 ANODIC COATING PER MIL-A-8625F Type II Class 2, WATER SEALING, COLOR: BLACK

3.3 MASK INDICATED AREAS, HOLES & THREADS. 3.4 ANODIC COATING ON EXTERNAL SURFACES ONLY. 4. MARKING: 4.1 SIZE AND POSITION IN ACCORDANCE WITH THIS DRAWING AND CAD FILE. 4.2 FONT TAHOMA, REGULAR, CAPITAL LETTERS. 4.3 P.N. AND REV. - ENGRAVE CHARACTERS (OR BY STAMPING WITH WHITE INK, OR BY LASER ETCHING), HEIGHT=3mm, DEPTH 0.5±0.1mm. 5. MARKING SHOULD BE MADE BY ENGRAVING 0.6mm DEPTH, FILLING BY WHITE EPOXY. CHARACTERS IN FONT ARIAL, REGULAR, HEIGHT=3.5mm, POSITION IN ACCORDANCE WITH CAD FILE. 6. GENERAL: 7.1ALL SCREWS MUST BE ASSEMBLED WITH LOCTITE 242. 7.2 APPROX WEIGHT- 1300 grm. REVISIONS REV. ECO DESCRIPTION DATE APPROVED 1.00 EC21000050 RTP 14/03/2021 DROR S. TECHAYA LTD. WWW.TECHAYA.COM TEL: +972-4-6377741 FAX:+972-4-6377761 P.O.B. 1500 PARDES HANNA, 37100, ISRAEL 24TX SWITCH 1.00 D E FA3 SHEET 1 OF 1SCALE: 1:2 DWG NO. TITLE: DWG REV. S-24TX-001 PART NO: PROJECT: WEIGHT: [g] DSGN'D SEE NOTES UDI P. ILAN C. SEE NOTES DROR S.DRAWN CHK'D APPV'D UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS FINISH: NAME SIGNATUREDATE MATERIAL: DO NOT SCALE DRAWING FILE NAME: M:\\SOLIDWORKS-2021\\techaya\\24TX-000\\MODEL\\S-24TX-001 04/07/2021 TOLERANCES (PER ISO 2768 (DIN7168), UNLESSS OTHERWISE SPECIFIED): - LINEAR DIMENSIONS: CLASS F - ANGULAR DIMENSIONS: CLASS M - GEOMETRICAL TOLERANCES: CLASS K - HOLES & OPENINGS DIMENSIONS: H12 - SHAFTS & EXTERNAL DIMENSIONS: h12 DEBURR & SHARP EDGES 0.2X45 NOMINAL DIMENSIONS AND GEOMETRY ARE ACCORDING TO MODEL FILE. THIS DOCUMENT SHALL NOT BE REPRODUCED, NOR SHALL THE INFORMATION CONTAINED HEREIN BE USED BY OR DISCLOSED TO OTHERS EXCEPT AS EXPRESSLY AUTHORIZED IN WRITING BY TECHAYA LTD. SURFACE ROUGHNESS: 5 6 7 8 LAST UPDATE: 7/5/2021PRINTED ON: 7/5/2021 B A 8764 C 51 2 3 A B 4321 C F E D DROR S. Miltech 24TX SWITCH ICD MILPOWER S-24TX-001 04/07/2021 04/07/2021 04/07/2021 C Techaya P .O.Box 1500, Pardes-Hanna, 37100 Israel Phone: +972 (4) 6377741 Fax: +972 (4) 6377761 Email: info@techaya.com Web: www.techaya.com 2 MILTECH™ 9224 Compact 24 Port Military Managed Gigabit Ethernet Switch PRODUCT DATASHEET rev. 1 SPECIFICATIONS

• QoS Multi-Layer Classifier: 802.1p, EtherType, VLAN-ID, IPv4/6 DSCP/T oS, and UDP/TCP ports & ranges traffic classification.
• Per port WFQ and Strict Queuing scheduling
• DSCP remarking for both IPv4 and IPv6 frames
• Ingress policer and ingress shaper per port with 500Kbps granularity
• Egress shaper per port with 500Kbps granularity
• Full-duplex flow control (IEEE802.3X) and half-duplex backpressure NETWORKING: Quality of Service:
• Security via Radius Authentication 802.1x, Port / MAC access control
• Port Security
• Per port ingress and egress port mirroring
• Mirroring per VLAN
• Private VLAN support per VLAN (Isolated and Promiscuous ports)
• Advanced ACL through hardware based match patterns
• Content Aware Policers for generic MAC, ARP , IPv4, IPv6 protocols
• Content Aware Policers actions are permit/deny, police, count
• Multiple ACLs per port for optimal usage of Content Aware Policers
• Storm controllers for flooded broadcast, multicast and unicast Security:
• 1 x Power Connector Type: MIL-D-38999: 88-569781-35P
• 6 x LAN Connector Type: MIL-D-38999: TV07W-LI-15-35-S-F311
• 1 x Management Connector Type: MIL-D-38999: 88-569782-35S CONNECTORS:
• MIL-STD-1275E | MIL-STD-704A | MIL-STD-461F | MIL-STD-810G | IP67STANDARDS: 38.0 52.5 52.5 243.5 94.0 (x2) 50.0 (x2) 235.5 (x4) 4.8 0.1 0.0 HOLE FOR SCREW #8-32UNC 43.0 26.3 GND #8-32UNC INDICATORS Led's 72.9 225.5 76.0 BASE PLATE NamePlate (x6) TV07W-LI-15-35-S-F311 Socapex With Dust Cap AMPHENOL NAME PLATE 88-569781-35P With Dust Cap AMPHENOL 88-569782-35S With Dust Cap AMPHENOL Sealing Screw M5 (With O-Ring) NOTES: 1. MATERIAL: AL6061-T651 PER AMS QQ-250/11. 2. DIMENSIONS: 2.1 THE SOLID MODEL FILE MAY BE USED FOR DEFINITIONS OR DIMENSIONS WHICH AREN'T SPECIFIED ON THE DRAWING. ALL NOTES AND DIMENSIONAL REQUIREMENTS SPECIFIED ON THE DRAWING ARE OBLIGATORY. 2.2 ALL DIMENSIONS AFTER PLATING. 2.3 ALL CRITICAL DIMENSION SHOWN IN THE DRAWING AND MARKED BY CR DIM IN RED. 3. FINISH: 3.1 CHEMICAL CONVERSION FILM PER MIL-DTL-5541F, TYPE II, CLASS 3. (GOLD).

3.3 MASK INDICATED AREAS, HOLES & THREADS. 3.4 ANODIC COATING ON EXTERNAL SURFACES ONLY. 4. MARKING: 4.1 SIZE AND POSITION IN ACCORDANCE WITH THIS DRAWING AND CAD FILE. 4.2 FONT TAHOMA, REGULAR, CAPITAL LETTERS. 4.3 P.N. AND REV. - ENGRAVE CHARACTERS (OR BY STAMPING WITH WHITE INK, OR BY LASER ETCHING), HEIGHT=3mm, DEPTH 0.5±0.1mm. 5. MARKING SHOULD BE MADE BY ENGRAVING 0.6mm DEPTH, FILLING BY WHITE EPOXY. CHARACTERS IN FONT ARIAL, REGULAR, HEIGHT=3.5mm, POSITION IN ACCORDANCE WITH CAD FILE. 6. GENERAL: 7.1ALL SCREWS MUST BE ASSEMBLED WITH LOCTITE 242. 7.2 APPROX WEIGHT- 1300 grm. REVISIONS REV. ECO DESCRIPTION DATE APPROVED 1.00 EC21000050 RTP 14/03/2021 DROR S. TECHAYA LTD. WWW.TECHAYA.COM TEL: +972-4-6377741 FAX:+972-4-6377761 P.O.B. 1500 PARDES HANNA, 37100, ISRAEL 24TX SWITCH 1.00 D E FA3 SHEET 1 OF 1SCALE: 1:2 DWG NO. TITLE: DWG REV. S-24TX-001 PART NO: PROJECT: WEIGHT: [g] DSGN'D SEE NOTES UDI P. ILAN C. SEE NOTES DROR S.DRAWN CHK'D APPV'D UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS FINISH: NAME SIGNATUREDATE MATERIAL: DO NOT SCALE DRAWING FILE NAME: M:\\SOLIDWORKS-2021\\techaya\\24TX-000\\MODEL\\S-24TX-001 04/07/2021 TOLERANCES (PER ISO 2768 (DIN7168), UNLESSS OTHERWISE SPECIFIED): - LINEAR DIMENSIONS: CLASS F - ANGULAR DIMENSIONS: CLASS M - GEOMETRICAL TOLERANCES: CLASS K - HOLES & OPENINGS DIMENSIONS: H12 - SHAFTS & EXTERNAL DIMENSIONS: h12 DEBURR & SHARP EDGES 0.2X45 NOMINAL DIMENSIONS AND GEOMETRY ARE ACCORDING TO MODEL FILE. THIS DOCUMENT SHALL NOT BE REPRODUCED, NOR SHALL THE INFORMATION CONTAINED HEREIN BE USED BY OR DISCLOSED TO OTHERS EXCEPT AS EXPRESSLY AUTHORIZED IN WRITING BY TECHAYA LTD. SURFACE ROUGHNESS: 5 6 7 8 LAST UPDATE: 7/5/2021PRINTED ON: 7/5/2021 B A 8764 C 51 2 3 A B 4321 C F E D DROR S. Miltech 24TX SWITCH ICD MILPOWER S-24TX-001 04/07/2021 04/07/2021 04/07/2021 A B C Techaya P .O.Box 1500, Pardes-Hanna, 37100 Israel Phone: +972 (4) 6377741 Fax: +972 (4) 6377761 Email: info@techaya.com Web: www.techaya.com 2 MILTECH™ 9224 Compact 24 Port Military Managed Gigabit Ethernet Switch PRODUCT DATASHEET rev. 1 SPECIFICATIONS

• QoS Multi-Layer Classifier: 802.1p, EtherType, VLAN-ID, IPv4/6 DSCP/T oS, and UDP/TCP ports & ranges traffic classification.
• Per port WFQ and Strict Queuing scheduling
• DSCP remarking for both IPv4 and IPv6 frames
• Ingress policer and ingress shaper per port with 500Kbps granularity
• Egress shaper per port with 500Kbps granularity
• Full-duplex flow control (IEEE802.3X) and half-duplex backpressure NETWORKING: Quality of Service:
• Security via Radius Authentication 802.1x, Port / MAC access control
• Port Security
• Per port ingress and egress port mirroring
• Mirroring per VLAN
• Private VLAN support per VLAN (Isolated and Promiscuous ports)
• Advanced ACL through hardware based match patterns
• Content Aware Policers for generic MAC, ARP , IPv4, IPv6 protocols
• Content Aware Policers actions are permit/deny, police, count
• Multiple ACLs per port for optimal usage of Content Aware Policers
• Storm controllers for flooded broadcast, multicast and unicast Security:
• 1 x Power Connector Type: MIL-D-38999: 88-569781-35P
• 6 x LAN Connector Type: MIL-D-38999: TV07W-LI-15-35-S-F311
• 1 x Management Connector Type: MIL-D-38999: 88-569782-35S CONNECTORS:
• MIL-STD-1275E | MIL-STD-704A | MIL-STD-461F | MIL-STD-810G | IP67STANDARDS: 72.9 225.5 (x6) TV07W-LI-15-35-S-F311 Socapex With Dust Cap AMPHENOL NAME PLATE 88-569781-35P With Dust Cap AMPHENOL 88-569782-35S With Dust Cap AMPHENOL Sealing Screw M5 (With O-Ring) NOTES: 2. DIMENSIONS: 2.3 3. FINISH:

3.3 MASK INDICATED AREAS, HOLES & THREADS. 3.4 ANODIC COATING ON EXTERNAL SURFACES ONLY. 4. MARKING: 4.1 SIZE AND POSITION IN ACCORDANCE WITH THIS DRAWING AND CAD FILE. 4.2 FONT TAHOMA, REGULAR, CAPITAL LETTERS. 4.3 P.N. AND REV. - ENGRAVE CHARACTERS (OR BY STAMPING WITH WHITE INK, OR BY LASER ETCHING), HEIGHT=3mm, DEPTH 0.5±0.1mm. 5. MARKING SHOULD BE MADE BY ENGRAVING 0.6mm DEPTH, FILLING BY WHITE EPOXY. CHARACTERS IN FONT ARIAL, REGULAR, HEIGHT=3.5mm, POSITION IN ACCORDANCE WITH CAD FILE. 6. GENERAL: 7.1ALL SCREWS MUST BE ASSEMBLED WITH LOCTITE 242. 7.2 APPROX WEIGHT- 1300 grm. REVISIONS REV. ECO DESCRIPTION DATE APPROVED 1.00 EC21000050 RTP 14/03/2021 DROR S. TECHAYA LTD. WWW.TECHAYA.COM TEL: +972-4-6377741 FAX:+972-4-6377761 P.O.B. 1500 PARDES HANNA, 37100, ISRAEL 24TX SWITCH 1.00 D E FA3 SHEET 1 OF 1SCALE: 1:2 DWG NO. TITLE: DWG REV. S-24TX-001 PART NO: PROJECT: WEIGHT: [g] DSGN'D SEE NOTES UDI P. ILAN C. SEE NOTES DROR S.DRAWN CHK'D APPV'D UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS FINISH: NAME SIGNATUREDATE MATERIAL: DO NOT SCALE DRAWING FILE NAME: M:\\SOLIDWORKS-2021\\techaya\\24TX-000\\MODEL\\S-24TX-001 04/07/2021 TOLERANCES (PER ISO 2768 (DIN7168), UNLESSS OTHERWISE SPECIFIED): - LINEAR DIMENSIONS: CLASS F - ANGULAR DIMENSIONS: CLASS M - GEOMETRICAL TOLERANCES: CLASS K - HOLES & OPENINGS DIMENSIONS: H12 - SHAFTS & EXTERNAL DIMENSIONS: h12 DEBURR & SHARP EDGES 0.2X45 NOMINAL DIMENSIONS AND GEOMETRY ARE ACCORDING TO MODEL FILE. THIS DOCUMENT SHALL NOT BE REPRODUCED, NOR SHALL THE INFORMATION CONTAINED HEREIN BE USED BY OR DISCLOSED TO OTHERS EXCEPT AS EXPRESSLY AUTHORIZED IN WRITING BY TECHAYA LTD. SURFACE ROUGHNESS: 5 6 7 8 LAST UPDATE: 7/5/2021PRINTED ON: 7/5/2021 B A 8764 C 51 2 3 A B 4321 C F E D DROR S. Miltech 24TX SWITCH ICD MILPOWER S-24TX-001 04/07/2021 04/07/2021 04/07/2021 Ask us about our complete line of power and networking products. Netanya, Israel • +972 73 246 9200 • sales@enercon.co.il www.enercon.co.il