8802-1

PS8802-1_04 CEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

(Top View) 1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. V O 7. NC 8. V CC1234 8765 PS8802-1 1. Anode1 2. Cathode1 3. Cathode2 4. Anode2 5. GND 6. V 7. VO1 8. VCC PS8802-2 1234 8765

DESCRIPTION

The PS8802-1, -2 are optically coupled isolators containi ng a GaAlAs LED on the light emitting diode (input side) and a PIN photodiode and a high-speed amplifier transistor on the output side on one chip. The PS8802-1, -2 are designed specifically for high common mode transient immunity (CMR), the PS8802-2 is suitable for high density applications.

FEATURES

• 40% reduction of mounting area (5-pin SOP × 2)  High common mode transient immunity (C MH, CML = ±10 kV/µs MIN.)  High supply voltage (V CC = 35 V)  High isolation voltage (BV = 2 500 Vr.m.s.)  High-speed response (t PHL = 0.8 µs MAX., tPLH = 1.2 µs MAX.)  Ordering number of tape product: PS8802-1-F3, F4: 1 500 pcs/reel : PS8802-2-F3, F4: 1 500 pcs/reel  Pb-Free product  Safety standards  UL approved: File No. E72422  DIN EN60747-5-2 (VDE0884 Part2) approved No.40008347 (option)

APPLICATIONS

 Computer and peripheral manufactures  General purpose inverter  Substitutions for relays and pulse transformers  Power supply PHOTOCOUPLER PS8802-1,-2

1 Mbps HIGH CMR ANALOG OUTPUT TYPE

8-PIN SSOP (SO-8) HIGH-SPEED PHOTOCOUPLER Document No. PN10418EJ04V0DS (4th edition) Date Published November 2004 CP(K) −NEPOC Series− The mark  shows major revised points.

PACKAGE DIMENSIONS (UNIT: mm) 1.27 0.1±0.1 3.95±0.1 6.0±0.2 0.5±0.3 0.15+0.10 –0.05 5.21±0.25 3.27±0.2 0.10 S MARKING EXAMPLE No. 1 pin Mark Initial of NEC (Engraved mark) PS8802-1 PS8802-2 No. 1 pin Mark Initial of NEC (Engraved mark) Assembly Lot N 8802-2 NL251 Week Assembled Assembly Lot N 8802-1 NL251 2 51 Year Assembled (Last 1 Digit) LN Rank Code In-house Code (L: Pb-Free) 2 51 Year Assembled (Last 1 Digit) LN Rank Code In-house Code (L: Pb-Free) Week Assembled Data Sheet PN10418EJ04V0DS 2 PS8802-1,-2

ORDERING INFORMATION

Part Number Order Number Solder Plating Specification Packing Style Safety Standard Approval Application Part Number*1 PS8802-1 PS8802-1-A Pb-Free*2 20 pcs (Tape 20 pcs cut) Standard products PS8802-1 PS8802-1-F3 PS8802-1-F3-A Embossed Tape 1 500 pcs/reel (UL approved) PS8802-1-F4 PS8802-1-F4-A PS8802-2 PS8802-2-A 20 pcs (Tape 20 pcs cut) PS8802-2 PS8802-2-F3 PS8802-2-F3-A Embossed Tape 1 500 pcs/reel PS8802-2-F4 PS8802-2-F4-A PS8802-1-V PS8802-1-V-A 20 pcs (Tape 20 pcs cut) DIN EN60747-5-2 PS8802-1 PS8802-1-V-F3 PS8802-1-V-F3-A Embossed Tape 1 500 pcs/reel (VDE0884 Part2) PS8802-1-V-F4 PS8802-1-V-F4-A Approved (Option) PS8802-2-V PS8802-2-V-A 20 pcs (Tape 20 pcs cut) PS8802-2 PS8802-2-V-F3 PS8802-2-V-F3-A Embossed Tape 1 500 pcs/reel PS8802-2-V-F4 PS8802-2-V-F4-A *1 For the application of the Safety Standard, following part number should be used. *2 With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact your nearby sales office. Data Sheet PN10418EJ04V0DS 3 PS8802-1,-2

ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current I F 25 mA/ch Reverse Voltage V R 5.0 V/ch Power Dissipation*1 PD 45 mW/ch Detector Supply Voltage V CC 35 V Output Voltage V O 35 V/ch Output Current I O 8.0 mA/ch Power Dissipation*2 PC 100 mW/ch Isolation Voltage*3 BV 2 500 Vr.m.s. Operating Ambient Temperature T A –55 to +100 °C Storage Temperature T stg –55 to +125 °C *1 Reduced to 0.45 mW/°C at TA = 25°C or more. *2 Reduced to 1.00 mW/°C at TA = 25°C or more. *3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Data Sheet PN10418EJ04V0DS 4 PS8802-1,-2

ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage V F I F = 16 mA 1.7 2.2 V Reverse Current I R V R = 3 V 10 µA Forward Voltage Temperature Coefficient ∆VF/∆TA IF = 16 mA −2.1 mV/ °C Terminal Capacitance C t V = 0 V, f = 1 MHz 30 pF Detector High Level Output Current I OH (1) I F = 0 mA, VCC = VO = 5.5 V 10 500 nA High Level Output Current I OH (2) I F = 0 mA, VCC = VO = 30 V 100 µA Low Level Output Voltage V OL I F = 16 mA, VCC = 4.5 V, IOL = 1.2 mA 0.1 0.4 V High Level Supply Current (PS8802-1) ICCH I F = 0 mA, VO = open, VCC = 30 V 0.1 2 µA High Level Supply Current (PS8802-2) 0.2 4 Low Level Supply Current (PS8802-1) ICCL I F = 16 mA, VO = open, VCC = 30 V 100 Low Level Supply Current (PS8802-2) 200 Coupled Current Transfer Ratio CTR I F = 16 mA, VCC = 4.5 V, VO = 0.4 V 15 25 45 % Input-Output Isolation Resistance RI-O V I-O = 1 kVDC, RH = 40 to 60% 10 11 Ω Insulation Resistance (Input-Input), (PS8802-2) RI-I V I-I = 1 kVDC, RH = 40 to 60% 10 10 Input-Output Isolation Capacitance CI-O V = 0 V, f = 1 MHz 0.6 pF Insulation Capacitance (Input-Input), (PS8802-2) CI-I 0.3 Propagation Delay Time (H → L)*1 tPHL IF = 16 mA, VCC = 5 V, RL = 2.2 kΩ, CL = 15 pF 0.3 0.8 µs Propagation Delay Time (L → H)*1 tPLH 0.6 1.2 Common Mode Transient Immunity at High Level Output CMH IF = 0 mA, VCC = 5 V, RL = 4.1 kΩ, VCM = 1.5 kV 10 kV/ µs Common Mode Transient Immunity at Low Level Output*2 CML IF = 16 mA, VCC = 5 V, RL = 4.1 kΩ, VCM = 1.5 kV −10 Data Sheet PN10418EJ04V0DS 5 PS8802-1,-2

*1 Test circuit for propagation delay time Input Output 50% 1.5 V VOL tPHL tPLH (IF = 7.5 mA) Pulse input (IF)(PW = 1 s, Duty cycle = 1/10) VO (Monitor) VCC = 5 V Input (Monitor) 0.1 F CL = 15 pF 47 Ω RL = 2.2 kΩ PS8802-1 µ µ Pulse input (IF)(PW = 1 s, Duty cycle = 1/10) VO (Monitor) VCC = 5 V Input (Monitor) 0.1 F CL = 15 pF47 Ω RL = 2.2 kΩ PS8802-2 µ µ Remark CL is approximately 15 pF which includes probe and stray wiring capacitance. *2 Test circuit for common mode transient immunity IF VO (Monitor) VCC = 5 V 0.1 F RL = 4.1 kΩ PS8802-1 VCM µ CL = 15 pF IF VO (Monitor) VCC = 5 V 0.1 F RL = 4.1 kΩ PS8802-2 VCM SW µ CL = 15 pF 90% 10% 1.5 kV 0 V VOH 2 V 0.8 V VOL VCM VO (IF = 0 mA) VO (IF = 16 mA) tr tf USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of 0.1 µF is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high temperature and high humidity. Data Sheet PN10418EJ04V0DS 6 PS8802-1,-2

TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) 25 50 75 100 Ambient Temperature TA (˚C) Diode Power Dissipation PD (mW) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE 120 100 25 50 75 100 Ambient Temperature TA (˚C) Transistor Power Dissipation PC (mW) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 100 0.01 0.1 Forward Voltage VF (V) Forward Current IF (mA) FORWARD CURRENT vs. FORWARD VOLTAGE TA = +100˚C +50˚C +25˚C 0˚C –25˚C 0.5 5 10 501 VCC = 4.5 V, VO = 0.4 V Forward Current IF (mA) CURRENT TRANSFER RATIO vs. FORWARD CURRENT Current Transfer Ratio CTR (%) 1.6 0.0 1.2 0.4 1.4 1.0 0.8 0.6 0.2 0 50 100–50 –25 25 75 Ambient Temperature TA (˚C) Normalized Current Transfer Raio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE Normalized to 1.0 at TA = 25˚C, IF = 16 mA, VCC = 4.5 V, VO = 0.4 V Ambient Temperature TA (˚C) High Level Output Current IOH (nA) HIGH LEVEL OUTPUT CURRENT vs. AMBIENT TEMPERATURE 10 000 0.1 1 000 100 50 100–25 0 25 75 VCC = VO = 30 V VCC = VO = 5.5 V IF = 0 mA Remark The graphs indicate nominal characteristics. Data Sheet PN10418EJ04V0DS 7 PS8802-1,-2

IF = 5 mA 25 mA Output Voltage VO (V) Output Current IO (mA) OUTPUT CURRENT vs. OUTPUT VOLTAGE –50 0 50 100–25 7525 Ambient Temperature TA (˚C) NORMALIZED PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURENormalized Propagation Delay Time tPHL, tPLH Normalized to 1.0 at TA = 25˚C, IF = 16 mA, VCC = 5 V, RL = 2.2 kΩ tPLH tPHL Forward Current IF (mA) PROPAGATION DELAY TIME vs. FORWARD CURRENT Propagation Delay Time tPHL, tPLH ( s)µ 3.0 1.0 2.0 10 15 255 20 tPHL tPLH VCC = 5 V, RL = 2.2 kΩ , CTR : 25% Load Resistance RL (Ω) PROPAGATION DELAY TIME vs. LOAD RESISTANCE Propagation Delay Time tPHL, tPLH ( s)µ VCC = 5 V, IF = 16 mA, CTR : 25% tPLH tPHL 0.1 10 k 100 k1 k Forward Current IF (mA) Output Voltage VO (V) OUTPUT VOLTAGE vs. FORWARD CURRENT 12 16 204826 10 14 18 RL = 2.2 kΩ 5.6 kΩ Remark The graphs indicate nominal characteristics. Data Sheet PN10418EJ04V0DS 8 PS8802-1,-2

TAPING SPECIFICATIONS (UNIT: mm) Outline and Dimensions (Reel) Packing: 1 500 pcs/reel 2.0±0.5 R 1.0 13.0±0.2φ 21.0±0.8φ 330±2.0φ 100±1.0φ 2.0±0.5 11.9 to 15.4 Outer edge of flange 17.5±1.0 13.5±1.0 13.0±0.2φ 1.7±0.1 2.0±0.05 4.0±0.1 1.75±0.1 6.4±0.1 5.56±0.1 0.3±0.058.0±0.1 1.5+0.1 5.5±0.1 12.0±0.2 3.6±0.1 4.05 MAX. Outline and Dimensions (Tape) Taping Direction PS8802-1-F3 PS8802-2-F3 PS8802-1-F4 PS8802-2-F4 Data Sheet PN10418EJ04V0DS 9 PS8802-1,-2

RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) 1.45 0.81.27 5.25 Data Sheet PN10418EJ04V0DS 10 PS8802-1,-2

1. Recommended soldering conditions (1) Infrared reflow soldering  Peak reflow temperature 260 °C or below (package surface temperature)  Time of peak reflow temperature 10 seconds or less  Time of temperature higher than 220°C 60 seconds or less  Time to preheat temperature from 120 to 180°C 120 ±30 s  Number of reflows Three  Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) 120±30 s (preheating) 220˚C 180˚C Package Surface Temperature T (˚C) Time (s) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s to 60 s 260˚C MAX. 120˚C (2) Wave soldering  Temperature 260 °C or below (molten solder temperature)  Time 10 seconds or less  Preheating conditions 120 °C or below (package surface temperature)  Number of times One (Allowed to be dipped in solder including plastic mold portion.)  Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron  Peak temperature (lead part temperature) 350 °C or below  Time (each pins) 3 seconds or less  Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100°C. Data Sheet PN10418EJ04V0DS 11 PS8802-1,-2

(4) Cautions  Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10418EJ04V0DS 12 PS8802-1,-2

4590 Patrick Henry Drive

Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A -AZ Lead (Pb) < 1000 PPM Not Detected (*) Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.