718 | DigiCamel IC Datasheet

Online Datasheet

Read 718 online.

718 ENERCON | Alldatasheet

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 2

Technical content

Unmanned aerial vehicles (UAVs) or Drones
Land autonomous vehicles (UGVs)
Robots
Other unmanned support vehicles These vehicles must be agile, compact and highly intelligent. In order to support this sophisticated intelligence, these platforms may have to carry and connect a variety of Ethernet-based devices including computers, sensors, and targeting systems - all in compact platforms that must operate in extreme environmental conditions. MILTECH™ 718 Ultra Compact 8 x 1GbE Embedded Military Board Level Ethernet Switch PRODUCT DESCRIPTION The MILTECH718 is a rugged, cost-effective, ultra- compact board-level Ethernet switching solution (70x40mm). Equipped with 8GbE 10/100/1000Mbps ports, this board - level switch is ideal for integrating system level solutions through board-to-board connectors. The MILTECH718 consumes only 5W of power and uses 9-32VDC. Its ruggedized design feature mechanical packaging enhancements designed for MILSTD-461E, MILSTD-810F/G and IP68 compliance when installed in an appropriate enclosure. SPECIFICATIONS
8 x triple-speed 10/100/1000MbpsETHERNET PORTS:
Full wire-speed forwarding rate
Cut through switch fabric
Auto MDI, MDI-X
Jumbo frame up to 10K Bytes
16K mac addresses NETWORKING:
Power + LAN Connector: Samtec board to board connector: QTE-040-02-L-D-A CONNECTORS:
MILSTD-461E, MILSTD-810F/G, IP68 when installed in an appropriate chassis STANDARDS:
2Mbit packet buffer
25Gbps High-Performance Bandwidth
LED indication (Speed, Link/Activity) per port - Optional
Wire-Speed Reception and Transmission
Integrated Address Look-Up Engine
Automatic Address Learning PERFORMANCE:
IEEE 802.3ab 1000BASE-TX
IEEE 802.3u 100BASE-TX
IEEE 802.3x Flow Control STANDARDS COMPLIANCE:

Jan 25, 2020 | rev. B Cham, Switzerland | www.enercon-europe.com | sales@enercon-europe.com | +41-41-740-4554 Gurgaon, India | www.mpsindia.in | sales@mpsindia.in | +91-124-651 0010 STACKABLE MULTI-PORT MODULAR JACK 8 POS. 8 CONTACTS RJSAE-5381-08 Terminal Block Headr 5.08mm 2Ways PN.- 1757242 PHOENIK CONTACT (x7) 3.2 3.2 1.8 (x7) 7.0 (x3) 5.5 (x2) 36.5 (x2) 60.0 (x2) 68.5 72.0 0.0 0.2 21.0 101.0 0.0 0.2 97.0 80.38 16.63 (x2) 4.5 13.0 (x2) 65.5 (x2) 93.0 91.0 18.5 78.5 66.5 38.5 33.5 HIGH SPEED GROUND PLANE SOCKET QSE-040-01-L-D-A SAMTEC COMPONENTS MAX HEIGHT LIMITED TO 5.2mm COMPONENTS MAX HEIGHT LIMITED TO 1.4mm COMPONENTS MAX HEIGHT LIMITED TO 25.4mm 1.9 NOTES: 1. APPLY MINIMUM OF 0.5-mm OFFSET INSIDE CONTOUR, COMPONENTS AND CONDUCTORS FORBIDDEN IN ALL LAYERS. 2. UNLESS OTHERWISE STATED, ALL HOLES ARE PLATED. 3. COMPONENTS FORBIDDEN ON PS. 4. COMPONENTS AND CONDUCTORES ARE FORBIDDEN IN ALL LAYERS. 6. UNLESS OTHERWISE SPECIFIED, COMPONENTS HEIGHT LIMITED TO 3.8mm ON PS. 7. TRACES & SOLDER LEGS ALLOWED ON PS, SOLDER LEGS HEIGHT LIMITED TO 1.0mm. 8. SILK SCREEN BAR CODE (51X8 MM) SHALL BE PLACED ANYWHERE ON CS. REVISIONS REV. ECO DESCRIPTION DATE APPROVED 1.00 RTP 03/09/2019 DROR S. TECHAYA LTD. WWW.TECHAYA.COM TEL: +972-4-6377741 FAX:+972-4-6377761 P.O.B. 1500 PARDES HANNA, 37100, ISRAEL ICE 718 1.00 D E FA3 SHEET 1 OF 1SCALE: 1:2 DWG NO. TITLE: DWG REV. evb-board-718 PART NO: PROJECT: WEIGHT: [g] DSGN'D SEE NOTES UDI EINAM SEE NOTES DROR S.DRAWN CHK'D APPV'D UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS FINISH: NAME SIGNATUREDATE MATERIAL: DO NOT SCALE DRAWING FILE NAME: M:\\PROJECTS SW\\ICE718\\MODEL\\EVB-718-000 9/3/2019 TOLERANCES (PER ISO 2768 (DIN7168), UNLESSS OTHERWISE SPECIFIED): - LINEAR DIMENSIONS: CLASS F - ANGULAR DIMENSIONS: CLASS M - GEOMETRICAL TOLERANCES: CLASS K - HOLES & OPENINGS DIMENSIONS: H12 - SHAFTS & EXTERNAL DIMENSIONS: h12 DEBURR & SHARP EDGES 0.2X45 NOMINAL DIMENSIONS AND GEOMETRY ARE ACCORDING TO MODEL FILE. THIS DOCUMENT SHALL NOT BE REPRODUCED, NOR SHALL THE INFORMATION CONTAINED HEREIN BE USED BY OR DISCLOSED TO OTHERS EXCEPT AS EXPRESSLY AUTHORIZED IN WRITING BY TECHAYA LTD. SURFACE ROUGHNESS: 5 6 7 8 LAST UPDATE: 9/8/2019PRINTED ON: 9/8/2019 B A 8764 C 51 2 3 A B 4321 C F E D DROR S. MAIN BOARD FOR EVB 718. evb-board-718 9/3/2019 9/3/2019 9/3/2019 SPECIFICATIONS

Voltage Input: 9-32Vdc Nominal
Power Consumption: 5W Typical
Chassis grounding POWER:
MIL-STD-461E Electromagnetic compatibility
CE-102 | CS-114 | CS-115 | CS-116 | RE-102 | RS-103 *When installed in an appropriate chassis ELECTROMAGNETIC:
MILSTD-810F/G | Air Pressure (500.5I,II) | Blowing Rain (506.5I) | Immersion (512.5I) | Salt Atmosphere (509.5I) | Blowing Dust (510.5I) | Loose Cargo Vibration (514.6II) | Wind Analysis
IP68 *When installed in an appropriate chassis ENVIRONMENTAL:
Dimensions: 70mm (L) x 40mm(W)
Dimensions: 2.75”(L) x 1.57”(W) PHYSICAL:
4 x mounting holes for board to board mountingINSTALLATION:
No Moving Parts. Passive CoolingCOOLING:
-40ºC to +85ºC (-40ºF to +185ºF) - Cold Start-UpOPERATING TEMP:
-45ºC to +85ºC (-49ºF to +185ºF)STORAGE TEMP:

ORDERING INFORMATION

Ultra Compact 1G Embedded Military Board Level Ethernet Switch, 8 x 10/100/1000TX, ESoB 1-718-000
Evaluation board for MILTECH7181-718EV-000
Evaluation board MILTECH718 with conformal coating1-718EV-001 A B C MILTECH™ 718 Ultra Compact 1G Embedded Military Board Level Ethernet Switch STACKABLE MULTI-PORT MODULAR JACK 8 POS. 8 CONTACTS RJSAE-5381-08 Terminal Block Headr 5.08mm 2Ways PN.- 1757242 PHOENIK CONTACT (x7) 3.2 3.2 1.8 (x7) 7.0 (x3) 5.5 (x2) 36.5 (x2) 60.0 (x2) 68.5 72.0 0.0 0.2 21.0 101.0 0.0 0.2 97.0 80.38 16.63 (x2) 4.5 13.0 (x2) 65.5 (x2) 93.0 91.0 18.5 78.5 66.5 38.5 33.5 HIGH SPEED GROUND PLANE SOCKET QSE-040-01-L-D-A SAMTEC COMPONENTS MAX HEIGHT LIMITED TO 5.2mm COMPONENTS MAX HEIGHT LIMITED TO 1.4mm COMPONENTS MAX HEIGHT LIMITED TO 25.4mm 1.9 NOTES: 1. APPLY MINIMUM OF 0.5-mm OFFSET INSIDE CONTOUR, COMPONENTS AND CONDUCTORS FORBIDDEN IN ALL LAYERS. 2. UNLESS OTHERWISE STATED, ALL HOLES ARE PLATED. 3. COMPONENTS FORBIDDEN ON PS. 4. COMPONENTS AND CONDUCTORES ARE FORBIDDEN IN ALL LAYERS. 6. UNLESS OTHERWISE SPECIFIED, COMPONENTS HEIGHT LIMITED TO 3.8mm ON PS. 7. TRACES & SOLDER LEGS ALLOWED ON PS, SOLDER LEGS HEIGHT LIMITED TO 1.0mm. 8. SILK SCREEN BAR CODE (51X8 MM) SHALL BE PLACED ANYWHERE ON CS. REVISIONS REV. ECO DESCRIPTION DATE APPROVED 1.00 RTP 03/09/2019 DROR S. TECHAYA LTD. WWW.TECHAYA.COM TEL: +972-4-6377741 FAX:+972-4-6377761 P.O.B. 1500 PARDES HANNA, 37100, ISRAEL ICE 718 1.00 D E FA3 SHEET 1 OF 1SCALE: 1:2 DWG NO. TITLE: DWG REV. evb-board-718 PART NO: PROJECT: WEIGHT: [g] DSGN'D SEE NOTES UDI EINAM SEE NOTES DROR S.DRAWN CHK'D APPV'D UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS FINISH: NAME SIGNATUREDATE MATERIAL: DO NOT SCALE DRAWING FILE NAME: M:\\PROJECTS SW\\ICE718\\MODEL\\EVB-718-000 9/3/2019 TOLERANCES (PER ISO 2768 (DIN7168), UNLESSS OTHERWISE SPECIFIED): - LINEAR DIMENSIONS: CLASS F - ANGULAR DIMENSIONS: CLASS M - GEOMETRICAL TOLERANCES: CLASS K - HOLES & OPENINGS DIMENSIONS: H12 - SHAFTS & EXTERNAL DIMENSIONS: h12 DEBURR & SHARP EDGES 0.2X45 NOMINAL DIMENSIONS AND GEOMETRY ARE ACCORDING TO MODEL FILE. THIS DOCUMENT SHALL NOT BE REPRODUCED, NOR SHALL THE INFORMATION CONTAINED HEREIN BE USED BY OR DISCLOSED TO OTHERS EXCEPT AS EXPRESSLY AUTHORIZED IN WRITING BY TECHAYA LTD. SURFACE ROUGHNESS: 5 6 7 8 LAST UPDATE: 9/8/2019PRINTED ON: 9/8/2019 B A 8764 C 51 2 3 A B 4321 C F E D DROR S. MAIN BOARD FOR EVB 718. evb-board-718 9/3/2019 9/3/2019 9/3/2019 (x4) 3.2 3.2 1.5 (x4) 7.0 (x2) 4.5 (x2) 65.5 70.0 0.0 0.1 57.0 (x2) 4.5 (x2) 35.5 40.0 0.0 0.1 20.0 QTE-040-02-L-D-A 1.6 NOTES: 1. APPLY MINIMUM OF 0.5-mm OFFSET INSIDE CONTOUR, COMPONENTS AND CONDUCTORS FORBIDDEN IN ALL LAYERS. 2. UNLESS OTHERWISE STATED, ALL HOLES ARE PLATED. 3. COMPONENTS FORBIDDEN ON PS. 4. COMPONENTS AND CONDUCTORES ARE FORBIDDEN IN ALL LAYERS. 5. UNLESS OTHERWISE SPECIFIED, COMPONENTS HEIGHT LIMITED TO 8.0mm ON CS. 6. UNLESS OTHERWISE SPECIFIED, COMPONENTS HEIGHT LIMITED TO 11.2mm ON PS. 7. TRACES & SOLDER LEGS ALLOWED ON PS, SOLDER LEGS HEIGHT LIMITED TO 1.0mm. 8. SILK SCREEN BAR CODE (51X8 MM) SHALL BE PLACED ANYWHERE ON CS. REVISIONS REV. ECO DESCRIPTION DATE APPROVED 1.00 RTP 20/08/2019 DROR S. TECHAYA LTD. WWW.TECHAYA.COM TEL: +972-4-6377741 FAX:+972-4-6377761 P.O.B. 1500 PARDES HANNA, 37100, ISRAEL MILTECH 718 1.00 D E FA3 SHEET 1 OF 1SCALE: 1:1 DWG NO. TITLE: DWG REV. main-board-718 PART NO: PROJECT: WEIGHT: [g] DSGN'D SEE NOTES UDI EINAM SEE NOTES DROR S.DRAWN CHK'D APPV'D UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS FINISH: NAME SIGNATUREDATE MATERIAL: DO NOT SCALE DRAWING FILE NAME: M:\\PROJECTS SW\\718\\MODEL\\main-board-miltech-718 8/20/2019 TOLERANCES (PER ISO 2768 (DIN7168), UNLESSS OTHERWISE SPECIFIED): - LINEAR DIMENSIONS: CLASS F - ANGULAR DIMENSIONS: CLASS M - GEOMETRICAL TOLERANCES: CLASS K - HOLES & OPENINGS DIMENSIONS: H12 - SHAFTS & EXTERNAL DIMENSIONS: h12 DEBURR & SHARP EDGES 0.2X45 NOMINAL DIMENSIONS AND GEOMETRY ARE ACCORDING TO MODEL FILE. THIS DOCUMENT SHALL NOT BE REPRODUCED, NOR SHALL THE INFORMATION CONTAINED HEREIN BE USED BY OR DISCLOSED TO OTHERS EXCEPT AS EXPRESSLY AUTHORIZED IN WRITING BY TECHAYA LTD. SURFACE ROUGHNESS: 5 6 7 8 LAST UPDATE: 9/9/2019PRINTED ON: 9/9/2019 B A 8764 C 51 2 3 A B 4321 C F E D DROR S. MAIN BOARD FOR MILTECH 718 main-board-718 8/20/2019 8/20/2019 8/20/2019

Product Information

718 specifications and overview.

Summary

Ultra Compact 8 x 1GbE Embedded Military Board Level Ethernet Switch Jan 25, 2020

Description

Ultra Compact 8 x 1GbE Embedded Military Board Level Ethernet Switch Jan 25, 2020

Source title 718 Datasheet(PDF) - Enercon Technologies Europe AG

Related Parts

More parts from the same family.

Browse manufacturer