702061

JUMO UK LTD

JUMO diraTRON DR100 Universal controller for mounting on DIN rail 35 mm 2025-05-16

Manufacturer: JUMO UK LTD

Document: 16 Pages / 1Mb

Request Quote Download Datasheet Read online HTML view

Read 702061 online.

702061 JUMOUKLTD | Alldatasheet

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 16

Technical content

Page 1/16Data Sheet 702061 JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14

36039 Fulda, Germany

Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 Email: mail@jumo.net Internet: www.jumo.net JUMO UK LTD JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc.

6724 Joy Road

East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com 70206100T10Z001K000 JUMO diraTRON DR100 Universal controller for mounting on DIN rail 35 mm Brief description The diraTRON DR 100 controller is a universally applicable DIN rail controller for controlling tem- perature, pressure, and other process variables. The device can be used as a two-state/three- step controller, and can also be used as a continuous controller with the analog output option. The measurement input is user configurable and can be used for

RTD temperature probes,
single and double thermocouples,
resistance transmitters,
resistance potentiometers
and current or voltage signals. The device is characterized by simple, clearly structured operation that is supported with texts. The device is optionally available with an RS485 interface, an additional digital input, and an an- alog output. The basic type includes autotuning, a ramp function, manual mode, limit value mon- itoring function, and digital control signals. Measured values are visualized on a dot-matrix LCD display with white backlight. The operating status is indicated by a two-color LED. In the event of a fault, the LED lights up red and if there is no fault, it lights up green. The device can be configured via a setup program or via the four keys on the device. Type 702061 Block diagram Analog input - RTD temperature probe or resistance transmitter in a 2- or 3-wire circuit - 2x RTD temperature probe - 2x resistance/potentiometer - Thermocouple - Resistance transmitter 100 k/c87 - Double thermocouple - 2x thermocouple - Voltage 0(2) to 10 V - Current 0(4) to 20 mA Relay K2 (changeover contact)Power supply -AC 110 to 240 V -15/+10%, 48 to 63Hz RS485-Interface Modbus slave Dot-Matrix-LCD-Display 64×96 pixel with background lighting USB-Interface USB-(Device) for Setup Available ex-works Option Analogausgang 0(4) to 20 mA, 0(2) to 10 V Membrane keyboard 4 keys for operation Relay K1 (changeover contact) Digital output DC 0/24 V, 30 mA galvanically isolated, usable as a transmitter supply Digital input 1 (potential-free contact) Digital input 2 (potential-free contact) 702061 Special features
Universal analog input
Temperature difference measurement
Fast wiring due to spring-cage terminals
Connection of up to 10 devices next to one another via the rear wall bus
Digital output can also be used as trans- mitter supply
Analog output op tionally as actual value, setpoint value, or controller output
RS485 interface
Autotun ing
Service and operating hours counter

Page 2/16Data Sheet 702061 JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 Email: mail@jumo.net Internet: www.jumo.net JUMO UK LTD JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc. East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com 70206100T10Z001K000

Description

The device has a universal analog input (for RTD temperature probe, 2 RTD temperature probes, thermocouple, double thermocouple, 2 thermocouples, current, voltage, resistance/ potentiometer, resistance transmitter), a digital input and a digital output. The digital output delivers a logic signal 0/24 V, can serve as voltage supply for transmitters, and is galvan- ically isolated. A K1 relay (changeover con- tact) is also available as standard. An additional K2 relay (changeover contact), dig- ital input 2, and an analog output is also op- tionally available. The digital inputs are provided to connect a potential-free contact. USB interface The device is equipped with a USB device in- terface (Micro-B socket on the front) that is provided for connecting to a PC and is only used for the setup program. RS485 interface An RS485 interface is also available as an op- tional extra, which is provided for communica- tion with a Modbus master. The Modbus RTU protocol is used for communication, which is expanded with an additional layer of security during safety-relevant communication. Electrical connection The electrical connection saves time by using practical spring-cage terminals according to DIN EN 60998-1 (PUSH IN technology). Rear wall terminals They can be ordered as accessories. The PUSH IN connection terminal is required for the voltage supply and connection of the RS485 interface (option) via the rear wall ter- minal. A wireless connec tion from device to device via the mounting rail rear wall terminal is still possible (see accessories). Controller The controller structures (P, I, PD, PI, PID) in- cluding autotuning are available. A two-state controller (via the K2 relay) or a continuous controller (with the analog output option) can be realized. Autotuning Autotuning (oscillation method and step re- sponse) also makes it possible for the control- ler to be matched to the control process by users who are not control technology experts. The way the control process reacts to changes in the actuating variable is evaluated in the process and suitable controller parameters are calculated. Service The switching cycles of the K1 and K2 relays are counted. When the set limit value is reached, a binary signal is activated that needs to be acknowledged. Setup program The setup program provides the user with an easy and convenient way to configure the de- vice using a PC. This allows data records to be created, edited, saved, and transferred to the device, as well as extracted from there. Expertise protection is implemented with password protection (code). If expertise protection is active, the read con- figuration is not displayed in the setup. A setup file with active expertise protection cannot be loaded into any devices; the protection has to be canceled beforehand Customer-specific linearization Sensor signals with spec ial characteristic line properties can also be used through custom- er-specific linearization. Programming is car- ried out in the setup program on the basis of a value table with up to 40 value pairs or through a formula (4th order polynomial).

Page 3/16Data Sheet 702061 JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 Email: mail@jumo.net Internet: www.jumo.net JUMO UK LTD JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc. East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com 70206100T10Z001K000 Controller parameters The following table shows the controller's parameter block. The optional controller (extra code = 032) must be available for this. The transmission behavior is specified by the selection of the controller structure and determined by the configuration of the parameters for the proportional band (P component), derivative time (D component), and reset time (I component). Parameter Value Default set- ting Unit Description Controller structure 1 P , I, PD, PI, PID PID - Transmission behavior of the controller output. Proportional band Pb 0 to 9999 0 Physical unit of the controller size Size of the proportional band. The controller structure is not effective with 0 (be- havior identical to limit value monitoring function). With a continuous controller, Pb has to be > 0. Derivative time dt 0 to 9999 80 s Impacts the differential component of the controller output signal. Reset time rt 0 to 9999 350 s Impacts the integral component of the controller output signal. Cycle time Cy 0 to 9999 20 s When using a switching output, the cycle time should be chosen so that the energy supply to the process is almost continuous, and the switching el- ements are not overloaded. Switching differential X d 0 to 9999 1 Physical unit of the controller size Hysteresis for a switching controller with propor- tional band Pb =0 Working point Y0 -100 to +100 0 % Output level for P and PD controllers (if x = w, y=Y 0). Output value limit Y1 0 to 100 100 % Maximum output value limit (only effective if Pb > 0). Output value limit Y2 0 to 100 0 % Minimum output value limit (only effective if Pb > 0). Minimum relay switch-on time Tc 0 to 9999 0 s Limitation of the switching frequency in the case of switching outputs (digital outputs).

Page 4/16Data Sheet 702061 JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 Email: mail@jumo.net Internet: www.jumo.net JUMO UK LTD JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc. East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com 70206100T10Z001K000 Technical data Analog input RTD temperature probe Thermocouples Designation Standard ITS Connection type Measuring range Accuracya a Accuracy refers to the measuring range. Pt100 Pt500 Pt1000 Tc=3.851 × 10 -3 1/K DIN EN IEC 60751:2023-06 ITS-90 Two/three-wire -200 °C to +850 °C ±0.1 % Pt100 GOST 6651-2009 A.2 ITS-90 Two/three-wire -200 °C to +850 °C ±0.1 % Pt50 GOST 6651-2009 A.2 ITS-90 Two/three-wire -200 °C to +850 °C ±0.1 % Ni100 Ni500 Ni1000 Tc=6.18 × 10-3 1/K DIN 43760:1987-09 IPTS-68 Two/three-wire -60 °C to +250 °C ±0.1 % Ni100 Tc=6.17 × 10 -3 1/K GOST 6651-2009 A.5 ITS-90 Two/three-wire -60 °C to +180 °C ±0.1 % Cu50 Tc=4.28 × 10-3 1/K GOST 6651-2009 A.3 ITS-90 Two/three-wire -180 °C to +200 °C ±0.1 % Cu100 Tc=4.28 × 10 -3 1/K GOST 6651-2009 A.3 ITS-90 Two/three-wire -180 °C to +200 °C ±0.1 % General specifications Connection type Two-wire circuit Three-wire circuit Two RTD temperature probes in two-wire circuit Ambient temperature influence  50 ppm/K referring to 22 °C Sensor line resistance Maximum 50  per line, automatic compensation with three-wire circuit Sensor current < 1 mA Input filter Digital filter, 2nd order; filter constant can be set from 0 s to 100 s Sampling rate 210 ms Designation Type Standard ITS Measuring range Accuracya Fe-CuNi L DIN 43710:1985-12 IPTS-68 -200 °C to +900 °C ±0.4 % Fe-CuNi J IEC 60584-1:2013 DIN EN 60584-1:2014 ITS-90 -210 °C to +1200 °C ±0.4 % from -100 °C Cu-CuNi U DIN 43710:1985-12 IPTS-68 -200 °C to +600 °C ±0.4 % from -100 °C Cu-CuNi T IEC 60584-1:2013 DIN EN 60584-1:2014 ITS-90 -200 °C to +400 °C ±0.4 % from -150 °C NiCr-Ni K IEC 60584-1:2013 DIN EN 60584-1:2014 ITS-90 -200 °C to +1300 °C ±0.4 % from -50 °C NiCr-CuNi E IEC 60584-1:2013 DIN EN 60584-1:2014 ITS-90 -200 °C to +1000 °C ±0.4 % from -80 °C NiCrSi-NiSi N IEC 60584-1:2013 DIN EN 60584-1:2014 ITS-90 -200 °C to +1300 °C ±0.4 % from -80 °C Pt10Rh-Pt S IEC 60584-1:2013 DIN EN 60584-1:2014 ITS-90 -50 °C to +1768 °C ±0.4 % from +20 °C

Page 5/16Data Sheet 702061 JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 Email: mail@jumo.net Internet: www.jumo.net JUMO UK LTD JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc. East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com 70206100T10Z001K000 Voltage, current (standard signals) Resistance transmitter Pt13Rh-Pt R IEC 60584-1:2013 DIN EN 60584-1:2014 ITS-90 -50 °C to +1768 °C ±0.4 % from +50 °C Pt30Rh-Pt6Rh B IEC 60584-1:2013 DIN EN 60584-1:2014 ITS-90 -50 °C to +1820 °C ±0.4 % from +400 °C W5Re-W26Re C IEC 60584-1:2013 DIN EN 60584-1:2014 ITS-90 0 °C to 2315 °C ±0.4 % W5Re-W20Re A IEC 60584-1:2013 DIN EN 60584-1:2014 ITS-90 0 °C to 2500 °C ±0.4 % W3Re-W25Re D ASTM E1751M-20 ITS-90 0 °C to 2315 °C ±0.4 % Chromel®-COPEL® L GOST R 8.585-2001 ITS-90 -200 °C to +800 °C ±0.4 % from -80 °C Chromel®-Alumel® K GOST R 8.585-2001 ITS-90 -270 °C to +1372 °C ±0.4 % from -80 °C Platinel II® ASTM E1751M-20 ITS-90 0 °C to 1395 °C ±0.4 % a Accuracy refers to the maximum measuring range. General specifications Connection type Thermocouple Double thermocouple 2 × thermocouple Ambient temperature influence  100 ppm/K referring to 22 °C, plus accuracy of the cold junction Cold junction Internal (Pt1000) or external (fixed value) Cold junction accuracy ±1 K Cold junction temperature (constant fixed value) -20 °C to +80 °C (adjustable) Input filter Digital filter, 2nd order; filter constant can be set from 0 s to 100 s Sampling rate Thermocouple: 210 ms Designation Measuring range Accuracya a Accuracy refers to the maximum measuring range. Input resistance Voltage 0 V to 10 V ±0.1 %  500 k 2 V to 10 V ±0.1 %  500 k -20 to +90 mV  0.4 %  500 k Designation Measuring range Accuracya a Accuracy refers to the maximum measuring range. Compliance voltage Current 4 mA to 20 mA ±0.2 %  3V 0 mA to 20 mA ±0.2 %  3V General specifications Ambient temperature influence  150 ppm/K referring to 22 °C Measuring range limits According to NAMUR Recommendation NE 43 Input filter Digital filter, 2nd order; filter constant can be set from 0 to 100 s Sampling rate 210 ms General specifications Accuracya a Accuracy refers to the measuring range. Measuring range 0 Ω to 100000 Ω 0.1 % Connection type Resistance transmitter in three-wire connection Ambient temperature influence  50 ppm/K referring to 22 °C Input filter Digital filter, 2nd order; filter constant can be set from 0 s to 100 s Sampling rate 210 ms Designation Type Standard ITS Measuring range Accuracya

Page 6/16Data Sheet 702061 JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 Email: mail@jumo.net Internet: www.jumo.net JUMO UK LTD JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc. East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com 70206100T10Z001K000 Resistance potentiometer Measuring circuit monitoring The device behavior in the event of a fault is configurable. Analog output Designation Measuring range Accuracya a Accuracy refers to the maximum measuring range. Resistance 0 Ω to 400 Ω  0.1 % 0 Ω to 4000 Ω  0.1 % General specifications Connection type Two-wire connection Three-wire connection Two resistance potentiometers in two-wire connection Ambient temperature influence  50 ppm/K referring to 22 °C Sensor line resistance Maximum 50 Ω per line Sensor current < 1 mA Input filter Digital filter, 2nd order; filter constant can be set from 0 s to 100 s Sampling rate 210 ms Measuring probe Measuring range undershoot Measuring range exceedance Break of probe or line short-circuit Probe RTD temperature probe Is detected Is detected Is detected Is detected Thermocouple and 2 × thermocouple Is detected Is detected Is detected Is not detected Double thermocouple Is detected Is detected Is detected Is detected a a Probe short circuit can only be detected with a double thermocouple (via double thermocouple fault limit) Resistance transmitter Is not detected Is not detected Is not detected Is not detected Resistance potentiometer Is not detected Is detected Is detected Is not detected Current 0 mA to 20 mA Is detected Is detected Is not detected Is not detected Current 4 mA to 20 mA Is detected Is detected Is detected Is detected Voltage 0 V to 10 V Is detected Is detected Is not detected Is not detected Voltage 2 V to 10 V Is detected Is detected Is detected Is detected Voltage Output signal DC 0 V to 10 V or 2 V to 10 V Load resistance ≥ 500 Ω Load influence ±15 mV Current Output signal DC 0 mA to 20 mA or 4 mA to 20 mA Burden ≤ 500 Ω Burden influence ±0.05 mA/100 Ω Accuracya a Accuracy refers to the measuring range end value. ±0.5 % Ambient temperature influence ≤ 150 ppm/K Standard or option Option 2 Galvanic isolation No

Page 7/16Data Sheet 702061 JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 Email: mail@jumo.net Internet: www.jumo.net JUMO UK LTD JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc. East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com 70206100T10Z001K000 Digital inputs Digital input 1 Digital input 2 Digital outputs Relay K1 (changeover contact) Relay K2 (changeover contact) Digital output Operating mode Potential-free contact Switching voltage, current internal voltage source DC 3.3 V, 1 mA Function Contact closed: input is active (RON <1 kΩ) Contact open: input is inactive (ROFF > 100 kΩ) Galvanic isolation No Standard or option Standard Operating mode Potential-free contact Switching voltage, current internal voltage source DC 24 V, 5 mA Function Contact closed: input is active (RON <1 kΩ) Contact open: input is inactive (ROFF >1 0 0kΩ) Galvanic isolation Yes Standard or option Option 1 Switching capacity Relay (changeover contact) with contact protection circuit: installed fuse cut-out 3.15 AT in pole arm. Contact life 100000 switching cycles at AC 250 V, 3 A resistive load 250000 switching cycles at 1 A (relay K1 is always only used for switch-off) Contact capability AC 230 V or 24 V; 3 A at cos φ = 1; (0.5 A at cosφ ≥ 0.6); 50 Hz DC 24 V; 3 A; (0.5 A at τ =7 ms) UL 60730 AC 230 V; 3 A D300; 30 k AC/DC 24 V; 3 A Minimum current DC 24 V, 100 mA Standard or option Standard Switching capacity Relay (changeover contact) with contact protection circuit: installed fuse cut-out 3.15 AT in pole arm. Contact life 100000 switching cycles at AC 250 V, 3 A resistive load 250000 switching cycles at 1 A (for temperature controller function) Contact capability AC 230 V or 24 V; 3 A at cos φ = 1; (0.5 A at cosφ ≥ 0.6); 50 Hz DC 24 V; 3 A; (0.5 A at τ =7 ms) UL 60730 AC 230 V; 3 A D300; 30 k AC/DC 24 V; 3 A Minimum current DC 24 V, 100 mA Standard or option Option 1 Output signal DC 0 V or 24 V, ±15 % Current Max. 30 mA Transmitter feed The digital output can be configured to be permanently switched to DC 24 V and supply the transmitter. Standard or option Standard

Page 8/16Data Sheet 702061 JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 Email: mail@jumo.net Internet: www.jumo.net JUMO UK LTD JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc. East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com 70206100T10Z001K000 Interfaces USB interface RS485 interface Display Electrical data Test voltage according to EN 60730-1 Connector type Micro-B (socket) Standard Low-Speed, Full-Speed Max. cable length 5 m Standard or option Standard Baud rate 9600 baud 19200 baud 38400 baud 57600 baud 115200 baud Data format (Data bit / parity / stop bit) 8 / no / 1 (8N1) 8 / odd / 1 (8O1) 8 / even / 1 (8E1) 8 / no / 2 (8N2) Protocol Modbus RTU, as slave Standard or option Option 2 or 3 Type Dot-matrix LCD Resolution 64 px × 96 px Brightness setting Contrast can be adjusted on device. Backlight can be switched off manually or via timeout. Decimal places 0, 1, 2 (user configurable) Voltage supply Galvanically isolated AC 110 V to 240 V, -15 % / +10 %, 48 Hz to 63 Hz DC 24 V, -20 % / +25 % The device may only be connected to SELV electrical circuits Power consumption 3.8 W 3.0 W Electrical safety According to DIN EN 14597:2015 and DIN EN 60730-2-9:2021; Overvoltage category III, Rated surge voltage 4000 V Pollution degree 2 Protection rating I with internal isolation from SELV Electrical connection Spring-cage terminals (PUSH IN technology) Type of mounting type Y Conductor cross section Wire or stranded wire (without ferrule) Min. 0.2 mm2, max. 2.5 mm2, AWG 24 to 14 Stranded wire with ferrule (for flexible line) Without plastic collar: min. 0.25 mm 2, max. 2.5 mm2 With plastic collar: min. 0.25 mm2, max. 2.5 mm2 Stripping length 10 mm Input or output to voltage supply 3.28 kV / 50 Hz

Page 9/16Data Sheet 702061 JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 Email: mail@jumo.net Internet: www.jumo.net JUMO UK LTD JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc. East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com 70206100T10Z001K000 Air gaps and creepage distances Environmental influences Case Approval marks and certificates According to DIN EN IEC 60730-2-9:2021-01, chapter 20 Air gap Creepage distances Mains voltage to electronic components and probes ≥ 6m m ≥ 5m m Mains voltage to relays ≥ 6m m ≥ 5m m Relays to relays ≥ 6m m ≥ 5m m Relays to electronic components and probes ≥ 6m m ≥ 5m m Ambient temperature range Storage -30 °C to +70 °C Operation -10 °C to +55 °C Site altitude Max. 2000 m above sea level Climatic environmental influences According to DIN EN 60721-3 with extended temperature range Resistance to climatic conditions  95 % rel. humidity without condensation Storage According to class 3K22 Operation According to class 3K22 Electromagnetic compatibility (EMC) A ccording to DIN EN IEC 60730-2-9:2021-01 Interference emission Class B Interference immunity Industrial requirement Housing type Plastic housing for DIN rail (indoor use only) Housing front Housing: cobalt blue RAL 5013 Membrane keyboard – with SIL/PL: signal yellow RAL 1003 Membrane keyboard – without SIL/PL: silver gray RAL 7001 Housing mounting On DIN rail according to DIN EN 60715 with the dimensions 35 mm × 7.5 mm Operating position Vertical Protection type IP20 according to DIN EN 60529 Flammability class V-1 according to UL94 Weight Maximum 200 g Approval mark Test facility Certificates/certification numbers Inspection basis Valid for UL requested Underwriters Laboratories File no.: E325456 UL/CSA 60730-1 UL/CSA 60730-2-9 for all versions

Page 10/16Data Sheet 702061 JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 Email: mail@jumo.net Internet: www.jumo.net JUMO UK LTD JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc. East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com 70206100T10Z001K000 Dimensions Electrical isolation 22,5135 109121 'LJLWDOLQSXW $QDORJLQSXW 9ROWDJHVXSSO\\ $&9WR+] '&9 $&9 /&''LVSOD\\/(' 0HPEUDQHNH\\ERDUG DQG86%,QWHUIDFH 56,QWHUIDFH RU 2SWLRQ 5HOD\\. 2SWLRQ 7KHYROWDJHVSHFLILFDWLRQVFRUUHVSRQGWRWKHWHVWYROWDJHV DOWHUQDWLQJYROWDJHUPVYDOXHV DFFRUGLQJWR',1(1 9'( IRUW\\SHWHVWLQJ )XQFWLRQDOJDOYDQLFLVRODWLRQIRUFRQQHFWLQJ6(/9RU3(/9HOHFWULFDOFLUFXLWV 'LJLWDOLQSXW IRUDUHOD\\DX[LOLDU\\ FRQWDFW 2SWLRQ 5HOD\\. $&9 $&9 $QDORJRXWSXW 2SWLRQ 'LJLWDORXWSXW '&9P$ RU

Page 11/16Data Sheet 702061 JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 Email: mail@jumo.net Internet: www.jumo.net JUMO UK LTD JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc. East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com 70206100T10Z001K000 Display and control elements

1 Black/white dot-matrix LCD display with backlight

2 Keys for operating the device

3 Micro USB connection cover

4 Two-colored status LED

(1) Mounting rail rear wall t erminal 33, 34 Digital input 1 11, 12 Option: Analog output or RS485 interface 41, 42, 43, 44 K1 relay 13, 14 Option: Digital input 2 (galvanically isolated) 51, 52, 53, 54 Option: K2 relay 21, 22, 23, 24 Analog input 61, 62, 63, 64 Voltage supply 31, 32 Digital output (galvanically isolated) USB USB connection (1) (2) (3) (4) 86%

Page 12/16Data Sheet 702061 JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 Email: mail@jumo.net Internet: www.jumo.net JUMO UK LTD JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc. East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com 70206100T10Z001K000 Connection diagram The connection diagram in the data sheet provides information on product selection. For the electrical connection, only use the installation instructions or the operating manual. When connecting the device to an external PELV electrical circuit, the existing internal SELV electrical circuit becomes a PELV electrical circuit. In this case, protection against elec tric shock is provided via double or reinforc ed insulation and voltage limitation. A connecti on to the protective ground is not required. Analog input Connection Terminals Symbol and terminal designation RTD temperature probe in two-wire circuit (21,24) RTD temperature probe in three-wire circuit (21, 22, 24) 2 × RTD temperature probe in two-wire circuit (21, 22, 24) Input 1: 21, 22 Input 2: 22, 24 For example for differential measure- ment Resistance potentiometer in two-wire circuit (21,24) Resistance potentiometer in three-wire circuit (21, 22, 24) 2 × resistance potentiometer in two-wire circuit (21, 22, 24) Input 1: 21, 22 Input 2: 22, 24 For example for differential measure- ment Thermocouple (22, 24) 21 22 23 24 21 22 23 24 21 22 23 24

Page 13/16Data Sheet 702061 JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 Email: mail@jumo.net Internet: www.jumo.net JUMO UK LTD JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc. East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com 70206100T10Z001K000 Analog output (option) Digital input 1 2 × Thermocouple (22, 24) Input 1: 22, 24 For example for differential measure- ment (21, 24) Input 2: 21, 24 Double thermocouple not galvanically isolated (22, 24) Input 1: 22, 24 (21, 24) Input 2: 21, 24 Voltage DC 0 V to 10 V DC 2 V to 10 V (23, 24) Current DC 0 mA to 20 mA DC 4 mA to 20 mA (22, 24) Resistance transmitter E = End S = Sliding contact B = Beginning (21, 23, 24) Connection Terminals Symbol and terminal designation Current DC 0 mA to 20 mA DC 4 mA to 20 mA (user configurable) (11, 12) Spannung DC 0 V bis 10 V DC 2 V bis 10 V (user configurable) (11, 12) Connection Terminals Symbol and terminal designation Potential-free contact Switching current 1 mA (33, 34) Connection Terminals Symbol and terminal designation 21 22 23 24 21 22 23 24 21 22 23 24 Ux 21 22 23 24 Ix 21 22 23 24 BSE 11 12 13 14 Ix 13 1411 12 Ux 32 33 34

Page 14/16Data Sheet 702061 JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 Email: mail@jumo.net Internet: www.jumo.net JUMO UK LTD JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc. East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com 70206100T10Z001K000 Digital input 2 (option) Relay K1 Relay K2 (option) Digital output Voltage supply Connection Terminals Symbol and terminal designation DC 24 V, 5 mA Galvanically isolated (13, 14) Connection Terminals Symbol and terminal designation (safe operating state according to quiescent current principle) Changeover contact with installed

3.15 A slow-blow microfuse in pole

P: Pole NO: normally open NC: normally closed (41, 43, 44) Connection Terminals Symbol and terminal designation Changeover contact with installed P: Pole NO: normally open NC: normally closed (51, 53, 54) Connection Terminals Symbol and terminal designation DC 0 V / 24 V, 30 mA Galvanically isolated (31, 32) DC 24 V, 30 mA Transmitter feed; Galvanically isolated (31, 32) Connection Terminals Symbol and terminal designation AC 110 V bis 240 V, -15 % / +10 %, 48 Hz to 63 Hz (Galvanically isolated) (61, 62) (Galvanically isolated) The device may only be connected to SELV electrical circuits. Terminals 63 and 64 are intended for looping through a maximum of 10 adjacent devices. (63, 64) 12 13 14 24V, 5 mA $VORZ 1& 12 51 52 53 54 3,15 A slow P NC NO 31 32 DC 0/24V, 30 mA 31 32 DC 24V, 30 mA 61 62 63 64 L (L+) N (L-) N (L-) L (L+)

Page 15/16Data Sheet 702061 JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 Email: mail@jumo.net Internet: www.jumo.net JUMO UK LTD JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc. East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com 70206100T10Z001K000 RS485 interface USB interface Rear wall contacts: PUSH IN connection terminal It enables the DC 24 V voltage supply and RS485 interface to be connected in conjunction with the mounting rail rear wall terminal. Note: It is not suitable for connecting AC 230 V. Rear wall contacts: Mounting rail rear wall terminal Other devices can therefore be connected via the back cover connection. A maximum of 10 devices can be supplied. Connection Terminals Symbol and terminal designation RS485-interface - as option 2 11 or via mounting rail rear wall terminal TxD+/RxD+ (11) TxD-/RxD- (12) Transmission/received data + Transmission/received data - RS485-interface - as option 3 via mounting rail rear wall terminal TxD+/RxD+ TxD-/RxD- Transmission/received data + Transmission/received data - Connection Terminals Symbol and terminal designation USB-interface (Device) (USB-Socket) Micro -B-connector, standard (5-pole), front side Connection Terminals Symbol and terminal designation Voltage supply 1 (L+) (L-) not used RS485-interface - as option 3 4 TxD-/RxD - TxD+/RxD + Connection Terminals Symbol and terminal designation Voltage supply 1 (L+) (L-) not used RS485-interface - as option 3 4 TxD-/RxD - TxD+/RxD +

Page 16/16Data Sheet 702061 JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 Email: mail@jumo.net Internet: www.jumo.net JUMO UK LTD JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc. East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com 70206100T10Z001K000 Order details Scope of delivery

1 device in the ordered version
1 quick start guide Accessories You can find further information on our website: (1) Basic type 702061 JUMO diraTRON DR100 with 1 analog input, digital input 1, digital output, K1 relay (changeover contact) (2) Version

0 Standard with default settings

1 Customer-specifically modified hardware

2 Customer-specifical ly modified software

3 Customer-specifically m odified hardware and software

(3) Option 1

0 None

1 K2 relay (changeover contact) and digita l input 2 (galvanically isolated)

(4) Option 2

3 Analog output

4 RS485 interface

a a Connection of RS485 via connection terminals 11 and 12 or via rear wall terminals (mounting rail rear wall terminals or PUSH IN connection terminals). (5) Option 3

7 RS485 interfaceb

b If option 2 = 0 or = 3 has been selected, connection of RS485 is only possible via rear wall termi nals (mounting rail rear wall terminals or PUSH IN connection terminals). (6) Voltage supply

23 AC 110 to 240 V, -15/+10 %, 48 to 63 Hz

36 DC 24 V, -20 /+25 %

Explanation on (2) version

0 Standard with default settings means:

everything that can be ordered in the order code shown

1 Customer-specifically modified hardware means:

everything that cannot be ordered in the order code shown, e.g. customer-specific front film

2 Customer-specifically modified software means:

device differs from the standard JUMO configuration (highlighted bold in the BTA). if the customer wants to have another measurement input configured, for example

3 Combination of 1 and 2

Type designation /--- - , Example 702061 / 0 - 1 - 3 - 7 23 Designation Material number Setup program (JUMO) 30071435 USB cable, A connector on Micro-B connector, 3 m 00616250 Mounting rail rear wall terminal (device) 00763134 PUSH IN connection terminal 00764414 http://www.jumo.de

Product Information

702061 specifications and overview.

Summary

JUMO diraTRON DR100 Universal controller for mounting on DIN rail 35 mm 2025-05-16

Description

JUMO diraTRON DR100 Universal controller for mounting on DIN rail 35 mm 2025-05-16

Source title 702061 Datasheet(PDF) - JUMO UK LTD

Related Parts

More parts from the same family.

Browse manufacturer