682-1Y TELEDYNE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
682 76 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2002 TELEDYNE RELAYS 682\\072002\\Q1 1A, 250 Vrms Optically Isolated AC Solid-State Relay
FEATURES
- Relay Qualified to MIL-PRF-28750
- Zero voltage turn-on SCR output
- Optical isolation
- Logic compatible input
- Low minimum output current
- Extremely low EMI
- Low profile metal DIP package
DESCRIPTION
This state-of-the-art solid-state relay is designed for use in AC power switching applications. The output is rated for 1A at 250 Vrms and can operate from 40 to 440 Hz for resistive and reactive loads with power factors as low as 0.2. Back- to-back SCRs are configured for zero voltage turn-on and can handle current surges up to 8A. The patented circuit design assures the lowest possible EMI by virtually eliminating commutation spikes while maintaining excellent noise immunity. Optical isolation allows safe control of AC loads from low level logic circuits. The low-profile metal DIP package is hermetically sealed to withstand severe environmental conditions encountered in military and aerospace applications. This relay is qualified to MIL-PRF-28750/9-001 and is available to Y screening levels. Series 682 WIRING DIAGRAM Part* Mil Spec Relay Description Number Number 682-1Y M28750/9-001 1A, 250 Vrms, AC Solid-State Relay (2A with Heatsink) * The Y suffix denotes parameters tested to MIL-PRF-28750 test methods. The W suffix denotes parameters tested to Teledyne specifications. ELECTRICAL SPECIFICATIONS (-55°C TO +110°C UNLESS OTHERWISE SPECIFIED) INPUT (CONTROL) SPECIFICATIONS Min Max Units Input Current (See Figure 1) VIN = 5 Vdc 15 mAdc VIN=32 Vdc 16 mAdc Turn-Off Voltage (Guaranteed Off) 1.5 Vdc Turn-On Voltage (Guaranteed On) 3.8 Vdc Reverse Voltage Protection -32 Vdc Input Voltage Range 3.8 32 Vdc OUTPUT (LOAD) SPECIFICATIONS Min Max Units Output Current Rating (See Figure 3) 0.2 2.0 Arms Output Voltage Rating 20 250 Vrms Frequency Range 40 440 Hz Output Voltage Drop @ -55 ºC 1.8 Vrms (See Figure 4) Off-State Leakage Current (250 Vac, 400 Hz) 1.0 mArms Turn-On Time 1/2 Cycle Turn-Off Time 1 Cycle Transient Voltage (T < 5 s) +500 Vpk Surge Current @ 25o C (16 ms) 8 Apk (See Figure 2) Overload (Repetitive, 10% Duty Cycle) 1.5 Arms Zero Voltage Turn-On Point at 25o C +15 Vpk Off-State dv/dt 200 V/μs (with Snubber - See Note 2) Load Power Factor (See note 3) 0.2 1 Insulation Resistance @ 500 Vdc 10 9 Ohm Isolation (Input to Output) 10 pF Dielectric Withstanding Voltage 1500 Vac TYPICAL INTERFACE TO 5 VOLT LOGIC (WITH SUGGESTED dv/dt SUPPRESSION - SEE NOTE 2) @ 1 Amp @ 25 ºC 1.6 Vrms @ 110 ºC 1.5 Vrms