321A-331251 ATTEND | Alldatasheet

Document overview

  • Manufacturer or author: Liu Robin
  • PDF pages: 4

Technical content

The information contained herein is exclusive property of ATTEND. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 -1 - SPECIFICATION AND PERFORMANCE Series 321A-331251 File 321A-331251_SPEC_1 Date 2019/10/25 Scope: This specification covers the requirements for product performance, test methods and quality assurance provisions of RF TYPE I Performance and Descriptions: The product is designed to meet the electrical, mechanical and environmental performance requirements specification. Unless otherwise specified, all tests are performed at ambient environmental conditions. RoHS: All material in according with the RoHS environment related substances list controlled. MATERIALS NO. PART NAME DESCRIPTION

1 INSULATOR Housing: LCP UL94V-0 Natural

2 CONTACT

Brass, Gold flash on contact area, 50” min. nickel under plating over all

3 GROUND

Phosphor Bronze, Gold flash on contact area, 50” min. nickel under plating over all ELECTRICAL Item Requirement Test Condition Contact Resistance Ground: Initial：10mΩ Max. Final：15mΩ Max. Inner： Initial：20mΩ Max. Final：25mΩ Max Subject mated contacts assembled in housing to 20mV Max. open circuit at 10mA Max. EIA-364-06B Insulation Resistance Initial：500M Ω Min. Final：100M Ω Min. Impressed voltage 100V DC for 1 minute. Test between adjacent circuits of

The information contained herein is exclusive property of. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 -2 - mated connector. EIA-364-21C Dielectric Withstanding Voltage No creeping discharge or flashover shall occur. 200V AC for 1 minute. Test between adjacent circuits of mated connector. Current leakage：0.5mA Max. VSWR 100MHz to 3GHz： 1.3 Max. 3GHz to 6GHz： 1.4 Max. Mate the connector and SMA connector together, then measure the VSWR by the network analyzer. EIA-364-108 MECHANICAL Item Requirement Test Condition Durability No physical damage and meet Operation Speed：2~3 cycles / min. Durability Cycles：30 Cycles. EIA-364-09C Vibration No momentary disconnections of 1 micro-sec/min. And meet Mated the connector, then Impressed the 100mA DC. Frequency ：10Hz→100Hz→10Hz / approx 20 minutes. Half amplitude, peak value of acceleration： 1.5mm or 59m/s2(6G). Direction：3 mutually perpendicular directions. Cycle：5 cycles for each direction. EIA-364-28E Mechanical Shock No momentary disconnections of 1 micro-sec/min. And meet Accelerate Velocity：735m/s (75G) Waveform：Half-sine shock plus. Duration：11m sec. Direct Current：1m A Direction：In ±X，±Y and ±Z axes. Cycle：3 cycles for each direction, totally 18 cycles. EIA-364-27B

The information contained herein is exclusive property of. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 -3 - ENVIRONMENTAL Item Requirement Test Condition Thermal Shock No physical damage and meet Mated Connector and apply the following test condition. Temperature： a) -40°C(30 minutes), +25°C (5 minutes) b) +85°C(30 minutes), +25°C (5 minutes) Cycle：5 cycles Humidity No physical damage and meet Mated Connector and apply the following test condition. Temperature：+40±2°C Humidity：90~95% RH Duration：96 Hours Temperature Life No physical damage and meet Mated Connector and apply the following test condition. Temperature：+85°C Duration：96 Hours EIA-364-17B Salt Spray No physical damage and detrimental corrosion. Meet Mated Connector and apply the following test condition. Temperature：+35±2°C Salt water density：5±1% Duration：24 hours EIA-364-26B Resistance to Cold No physical damage and meet Mated Connector and apply the following test condition. Temperature：-40±2°C Duration：96 hours SOLDER ABILITY Item Requirement Test Condition Solder Ability Dipped surface shall be wet with solder： 95% Min. Dip the solder pin of the connector in solder bath. Temperature：+245±5°C Duration：5±0.5 sec. Soldering Heat Resistance No physical damage. Lead free reflow up to 260°C peak for 10 sec.

The information contained herein is exclusive property of. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 -4 - Reflow Profile Preheating temperature: 150 ~ 200°C, 60~120 seconds Liquidus temperature (TL): 217°C, 60~150 seconds Peak temperature: 260°C Time within 5 °C of peak temperature (Tc): 255°C, 30seconds