101M-TEX0 ATTEND | Alldatasheet
Document overview
- PDF pages: 3
Technical content
The information contained herein is exclusive property of Attend. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 -1 - SPECIFICATION AND PERFORMANCE Series 101M-TEX0 File 101M-TEX0_SPEC_1 Date 2020-06-30 Scope: This specification covers the requirements for product performance, test methods and quality assurance provisions of 101M-TEX0 Performance and Descriptions: The product is designed to meet the electrical, mechanical and environmental performance requirements specification. Unless otherwise specified, all tests are performed at ambient environmental conditions. RoHS: All material in according with the RoHS environment related substances list controlled. MATERIALS NO. PART NAME DESCRIPTION
1 Housing LCP UL 94V-0, Black
2 Contact Phosphor Bronze, Gold plating over Nickel
3 SHELL Stainless Steel
4 SLIDER LCP, UL94V-0, Black
5 SPRING SWP
6 LINK Stainless Steel
7 CARD LOCK Stainless Steel
Rated Current 0.5A Operating Temperature -25°C to +85°C Storage Temperature -40°C to +85°C ELECTRICAL Item Requirement Test Condition Contact Resistance 30 m Ω ∆R=25mΩ max. Subject mated contacts assembled in housing to 20 mV max. open circuit at 10mA. EIA-364-23C Insulation Resistance 1000 M Ω Min. at 500V DC/2 min. Impressed voltage 500VDC for one minute, test between adjacent circuit EIA-364-21D Dielectric Withstanding Voltage No breakdown at 500V RMS EIA-364-20D, Test method B
The information contained herein is exclusive property of Attend. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 -2 - MECHANICAL Item Requirement Test Condition Durability 12,000 Cycles Max. EIA-364-09C Insertion Force 25 N Max. Speed 25±3 mm/minute Removal Force 0.5 N Min. and 20 N Max. Speed 25±3 mm/minute Card Reverse Insertion 50 N Min. No damage is observed ENVIRONMENTAL Item Requirement Test Condition Humidity Meets requirements of product drawing and electrical specification. Ambient Temp.: 40±3°C R. H.: 90 to 95% Duration: 96hrs. EIA-364-31B method ΙΙ Condition A Salt spray Meets requirements of product drawing and electrical specification. Temperature: 35°C±2°C Density of salt water: 5±1% Period: 48 hours Low Temperature Meets requirements of product drawing and electrical specification. Chamber Temperature: -40±3°C Duration: 96 hours EIA-364-59A Temperature Life Meets requirements of product drawing and electrical specification. Chamber Temperature: 105±3°C Duration: 96 hours EIA364-17 SOLDER ABILITY Item Requirement Test Condition Solder ability The test area shall be covered more than 95% of immersed area with flash solder Solder Temperature:245°C±5°C Immersion Period: 5±0.5sec.
The information contained herein is exclusive property of Attend. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 -3 - Reflow Profile Preheating temperature: 150 ~ 200°C, 60~120 seconds Liquidus temperature (TL): 217°C, 60~150 seconds Peak temperature: 260°C Time within 5 °C of peak temperature (Tc): 255°C, 30seconds