306 ENERCON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

The MILTECH306 is a small size, IP68 rugged construction, USB hub, offering 7+1 USB 2.0 ports. The portable rugged USB hub is an ideal solution for command post, man packable applications based on USB systems and devices. All ports are plug-n-play, providing network connectivity for most portable USB devices, including:

  • Helmet-mounted heads-up displays
  • Rugged computers
  • Navigation devices
  • Communications systems
  • IP-based sensors
  • Battlefield communication C5ISR With the best combination of size, weight, power and cost (SWaP-C) in the industry, the MILTECH306 reduces load on the soldier, providing more space for equipment that increases effectiveness and survivability. The MILTECH306 is available in dual power modes: VBUS and External. Both power inputs are provided through dedicated contacts on connector J1. External power input supports 8-28VDC. VBUS is 5VDC via host device. MILTECHTM 306 An IP68 Military USB Hub MILTECH306 also provides the option for auxiliary 5VDC, 2 Amp (dedicated contacts) on downstream ports #2, #3, #6, and #7 when powered by an external source (total of 8A). The unit’s mechanical packaging enhancements, including ruggedized SCE2 circular connectors, are designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. Leveraging best-in-class technology, the MILTECH306 serves as a robust commercial off-the-shelf (COTS) solution for rugged USB connectivity. 1232024 Cham, Switzerland | www.enercon-europe.com | sales@enercon-europe.com | +49 170 7741070 Gurgaon, India | www.mpsindia.in | sales@mpsindia.in | +91 124 651 0010 SPECIFICATIONS ETHERNET PORTS:: • 1+7 USB 2.0 Hub with 8 dedicated ports NETWORKING: • Full wire-speed forwarding rate CONNECTORS: • Connectors Type: SCE2-B-76A06-07SN-001 CHASSIS: • Low profile rugged machined aluminum
  • Conductively cooled
  • Ingress protection against sand, dust and moisture
  • Anodize Coating, MIL-A-8625, Type II, Class 2 STANDARDS: • MILSTD-461E, MILSTD-810F/G/GM, IP68

Cham, Switzerland | www.enercon-europe.com | sales@enercon-europe.com | +49 170 7741070 Gurgaon, India | www.mpsindia.in | sales@mpsindia.in | +91 124 651 0010 SPECIFICATIONS PERFORMANCE: • 1 upstream USB 2.0

  • 7 downstream USB 2.0 (including 2 High Power ports)
  • Up to five cascaded hubs
  • Maximum cable length between each hub: 5m
  • Up to 127 devices
  • Per port LED indication STANDARDS COMPLIANCE: • USB specification version 2.0 1 (data rates of up to 480 Mbps)
  • USB specification version 1.1 (data rates of up to 12 Mbps)
  • OHCI, UHIC, VEHCI POWER: • VBUS powered mode input voltage: 5Vdc Nominal - USB Sourcing
  • External power mode input Voltage: 8-28Vdc – external PSU sourcing
  • Power Consumption: 2W Typical (data transfer only)
  • Dual-mode power - once external DC is detected, the unit operates in external power mode
  • Chassis grounding ELECTROMAGNETIC: • MIL-STD-461E Electromagnetic compatibility
  • CE-102, CS-114, CS-115, CS-116, RE-102, RS-103 ENVIRONMENTAL: • MILSTD-810F/G/GM: Humidity (507.5II), Air Pressure (500.5I,II), Blowing Rain (506.5I), Immersion (512.5I), Salt Atmosphere (509.5I), Blowing Dust (510.5I), Loose Cargo Vibration (514.6II), Wind Analysis.
  • IP68 PHYSICAL: • Dimensions: 82.2mm (L) x 64.1(W) x 26(H), Not including connector Dust Caps
  • Weight: 140g - including dust caps INSTALLATION: • Portable, 4 screws for mounting to any flat surface. COOLING: • No Moving Parts. Passive Cooling OPERATING TEMP: • -45ºC to +85ºC (-49ºF to +185ºF) - Cold Start-Up STORAGE TEMP: • -45ºC to +85ºC (-49ºF to +185ºF) A B C

Cham, Switzerland | www.enercon-europe.com | sales@enercon-europe.com | +49 170 7741070 Gurgaon, India | www.mpsindia.in | sales@mpsindia.in | +91 124 651 0010

ORDERING INFORMATION

2-CBL306USBDO Downstream harness 1 x SCE connector to 1 USB connector 3 meter length 2-CBL306USBPODO Downstream harness with high power output 1x SCE connector to 1x USB connector and 2 wires for power out 2-CBL306USBPIUP USB upstream + power input Harness for MILTECH306, SCE connector to USB female