303D ATTEND | Alldatasheet
Document overview
- Manufacturer or author: willis
- PDF pages: 3
Technical content
The information contained herein is exclusive property of ATTEND. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 -1 - SPECIFICATION AND PERFORMANCE Series 303D File 303D-D100X02_SPEC_1 Date 2022/04/07 Scope: This specification covers the requirements for product performance, test methods and quality assurance provisions of below Part Name Description 303D-D100F02 Pogo Pin Magnet Type, Machine Pin 2P, 10.0D, DIP, 10u", 500g, 5A, black 303D-D100M02 Pogo Pin Magnet Type, 2P, 10.0D, DIP, 10u", 500g, 3A, black Performance and Descriptions: The product is designed to meet the electrical, mechanical and environmental performance requirements specification. Unless otherwise specified, all tests are performed at ambient environmental conditions. RoHS: All material in according with the RoHS environment related substances list controlled. MATERIALS NO. PART NAME DESCRIPTION
1 HOUSING HTN FR52G30NH, UL94V-0, Black
2 POGO PIN
2.1 PISTON Lead free brass C6801 or equivalent, gold plating over nickel
2.2 BARREL Lead free brass C6801 or equivalent, gold plating over nickel
2.3 SPRING Stainless steel 304 or equivalent
3 MACHINE PIN Lead free brass C6801 or equivalent, gold plating over nickel
4 SLEEVE Lead free brass C6801 or equivalent, gold plating over nickel
5 MAGNET Neodymium magnet N35, nickel plating
6 GLUE LSR-67
The information contained herein is exclusive property of ATTEND. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 -2 - RATING Rated Current 3A Rated Voltage 12V DC Operating Temperature -30°C TO +60°C Storage Temperature -30°C TO +60°C Durability 20,000 ELECTRICAL Item Requirement Test Condition Contact Resistance 50mΩ Max. at working stroke (at standing still) Voltage drop system four-wire system with below 300mA Dielectric Strength No dielectric breaks down. 500VAC 1 minute Insulation Resistance 100M MIN. 500VDC 1 minute MECHANICAL Item Requirement Test Condition Pin Force 80g±0.2g 1.1mm compression, test speed 25.0mm/min. Pin Strength No appearance damage 9.8N force on pin from any direction for 1 minute Pin Pulling Off Force No appearance damage 4.9N force on a pin from axis direction for 1 minute ENVIRONMENTAL Item Requirement Test Condition Operation durability No appearance damage Contact Resistance: 100mΩ Max. Pin Force: 80g±0.2g No appearance damage 1.1mm pin compression for the nominal stroke at a frequency of 10 to 20 times per minute for 20,000 cycles. Low Temperature Durability Contact Resistance: 100mΩ Max. No appearance damage Store in temp:-30°C±3°C for 96hrs, then leave in the ambient temperature for 1 hour. High Temperature Durability Store in temp: +60°C±2°C for 96hrs, then leave in the ambient temperature for 1 hour.
The information contained herein is exclusive property of ATTEND. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 -3 - Humidity Durability Meet electrical spec. No appearance damage Store in temp: 60°C±2°C with humidity of 90% ~ 95% for 96hrs, then leave in the ambient temperature for 1 hour. Temperature Cycle Test Cycle 5 times (Table 1 Shows test condition for 1 circle). Leave in the ambient temp for 1 hour. Salt Spray No excessive surface corrosion The electrical performance shall be measured after continuous spray of salt water with 5±1% density and 35°C±2°C temperature for 48 hours, cleaning with lukewarm water and dry, and leaving in ambient temperature for 1 hour. Vibration Contact Resistance: 100mΩ Max. No appearance damage Intermittency below 1µ sec Connect each connector pin in series, conducting current of 0.1A. After that, the vibration described below is added. Amplitude: 1.5mm Sweeping cycle:10~55~10 Hz/minute Duration of test:2 hours for each of X, Y, Z axis Shock Connect each connector pin in series, conducting current of 0.1A. After that, the shock described below is added. Accelerating rate:490m/s² Operating time of the test:11ms The number of operating times: 3 shocks at X, Y, Z axis both in negative and positive direction. Table 1 –Temperature Cycle Step Temperature (°C) Time (minutes) 1 -30±3 30~35 2 5~35 10~15 3 60±2 30~35 4 5~35 10~15