303C ATTEND | Alldatasheet
Document overview
- Manufacturer or author: willis
- PDF pages: 3
Technical content
The information contained herein is exclusive property of ATTEND. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 -1 - SPECIFICATION AND PERFORMANCE Series 303C File 303C-321018-30-04_SPEC_1 Date 2021/12/06 Scope: This specification covers the requirements for product performance, test methods and quality assurance provisions of below Part Name Description 303C-C4115-30-04 Pogo Machine Pin, Magnet Type, 4P H=4.15mm, Pitch 3.0, DIP, 20u", black 303C-321018-30-04 Pogo Pin, Magnet Type, 4Pin H4.6, Pitch 3.0, DIP, 5u", Black Performance and Descriptions: The product is designed to meet the electrical, mechanical and environmental performance requirements specification. Unless otherwise specified, all tests are performed at ambient environmental conditions. RoHS: All material in according with the RoHS environment related substances list controlled. MATERIALS NO. PART NAME DESCRIPTION
1 HOUSING HTN FR52G30NH, UL94V-0, Black
2 POGO PIN Lead free brass C6801 or equivalent, gold plating over nickel
3 MACHINE PIN Lead free brass C2801 or equivalent, gold plating over nickel
4 MAGNET Neodymium magnet N48, nickel plating
5 GLUE LTE-120HP
Operating Temperature -30°C TO +60°C Storage Temperature -30°C TO +60°C Durability 20,000 Cycles
The information contained herein is exclusive property of ATTEND. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 -2 - ELECTRICAL Item Requirement Test Condition Contact Resistance 30mΩ Max. at working stroke (at standing still) Voltage drop system four-wire system with below 300mA Dielectric Strength No dielectric breaks down. 500VAC 1 minute Insulation Resistance 100M MIN. 500VDC 1 minute MECHANICAL Item Requirement Test Condition Pin Force 40g±20g 0.4mm compression, test speed 25.0mm/min. Pin Strength No appearance damage 9.8N force on pin from any direction for 1 minute Pin Pulling Off Force No appearance damage 3.0N force on a pin from axis direction for 1 minute ENVIRONMENTAL Item Requirement Test Condition Operation durability No appearance damage Contact Resistance: 100mΩ Max. Pin Force: 80g±0.2g No appearance damage 1.0mm pin compression for the nominal stroke at a frequency of 10 to 20 times per minute for 20,000 cycles. Low Temperature Durability Contact Resistance: 100mΩ Max. No appearance damage Store in temp:-30°C±3°C for 96hrs, then leave in the ambient temperature for 1 hour. High Temperature Durability Store in temp: +60°C±2°C for 96hrs, then leave in the ambient temperature for 1 hour. Humidity Durability Meet electrical spec. No appearance damage Store in temp: 60°C±2°C with humidity of 90% ~ 95% for 96hrs, then leave in the ambient temperature for 1 hour. Temperature Cycle Test Cycle 5 times (Table 1 Shows test condition for 1 circle). Leave in the ambient temp for 1 hour. Salt Spray No excessive surface corrosion The electrical performance shall be measured after continuous spray of salt water with 5±1% density and 35°C±2°C temperature for 24 hours, cleaning
The information contained herein is exclusive property of ATTEND. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 -3 - with lukewarm water and dry, and leaving in ambient temperature for 1 hour. Vibration Contact Resistance: 100mΩ Max. No appearance damage Intermittency below 1µ sec Connect each connector pin in series, conducting current of 0.1A. After that, the vibration described below is added. Amplitude: 1.5mm Sweeping cycle:10~55~10 Hz/minute Duration of test:2 hours for each of X, Y, Z axis Shock Connect each connector pin in series, conducting current of 0.1A. After that, the shock described below is added. Accelerating rate:490m/s² Operating time of the test:11ms The number of operating times: 3 shocks at X, Y, Z axis both in negative and positive direction. Table 1 –Temperature Cycle Step Temperature (°C) Time (minutes) 1 -30±3 30~35 2 5~35 10~15 3 60±2 30~35 4 5~35 10~15