219 ATTEND | Alldatasheet
Document overview
- PDF pages: 3
Technical content
The information contained herein is exclusive property of ATTEND. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 ‐1 ‐ SPECIFICATION AND PERFORMANCE Series 219 File 219 SERIES_SPEC_1 Date 2023/07/14 Scope: This specification covers the requirements for product performance, test methods and quality assurance provisions of 219 SERIES Performance and Descriptions: The product is designed to meet the electrical, mechanical and environmental performance requirements specification. Unless otherwise specified, all tests are performed at ambient environmental conditions. RoHS: All material in according with the RoHS environment related substances list controlled. MATERIALS NO. PART NAME DESCRIPTION
1 Housing High Temperature Thermoplastic, UL94V-0, Black
2 Contact Brass, Gold under Nickel plating
3 Shell Brass, Nickel plated
4 Nut Brass, Nickel plated
5 O-RING Rubber
6 EPOXY EF400 A&B
Rated voltage Refer to the product drawing Rated current Refer to the product drawing Operating temperature -40°C to +85°C Storage temperature -40°C to +85°C Durability 100 cycles ELECTRICAL Item Requirement Test Condition Temperature rise test 30°C max. change allowed at rated current Sample mated, to measure the current when the temperature rise of the terminal within 30°C Dielectric withstanding voltage No Breakdown on appearance IEC 60512, Test 4a Standard atmospheric conditions Mated connectors
The information contained herein is exclusive property of. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 ‐2 ‐ 3 to 4 ways= 1kVAC 5 to 8 ways= 0.65kVAC Contact resistance 20m Ω max. IEC 60512, Test 2a Standard atmospheric conditions Insulation resistance 100M Ω min. IEC 60512, Test 3a, Method A Standard atmospheric conditions Test voltage 500V±15VDC MECHANICAL Item Requirement Test Condition Durability 100cycles no evidence of physical damage. Contact resistance 20mΩ max IEC 60512, Test 9a Standard atmospheric conditions Max. speed of operations = 10 mm/s Rest: 30 s, unmated ENVIRONMENTAL Item Requirement Test Condition IP degree of protection IPX7 IEC 60529 Sample condition: mated Put the testing sample under water 1m, duration 30 minutes Thermal shock Finish Contact resistance 20mΩ max Insulation resistance 100MΩ min Sample condition: mated Humidity test (Steady state) Finish Contact resistance 20mΩ max Insulation resistance 100MΩ min Temperature: 40°C Humidity: 90% R.H. Duration: 96hours Humidity cycling test Finish Contact resistance 20mΩ max Insulation resistance 100MΩ min Sample condition: mated
The information contained herein is exclusive property of. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 ‐3 ‐ Salt spray Finish Contact resistance 20mΩ max No damage Sample condition: mated Temperature: 35°C Salt solution concentration: 5% (by weight) pH value(avg.): 6.5~7.2 spray volume(avg.): 1.0~2.0ml/hour duration: 48hours SOLDER ABILITY Item Requirement Test Condition Solder ability 95%of immersed area must show no voids, pin holes. DIP solder tails into the molten solder (held at 230±5°C) up to 0.5mm from the tip of tails for 3±0.5 seconds.