216 ATTEND | Alldatasheet
Document overview
- PDF pages: 3
Technical content
The information contained herein is exclusive property of ATTEND. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 ‐1 ‐ SPECIFICATION AND PERFORMANCE Series 216 SERIES File 216 SERIES_SPEC_1 Date 2023-07-13 Scope: This specification covers the requirements for product performance, test methods and quality assurance provisions of 216 SERIES Performance and Descriptions: The product is designed to meet the electrical, mechanical and environmental performance requirements specification. Unless otherwise specified, all tests are performed at ambient environmental conditions. RoHS: All material in according with the RoHS environment related substances list controlled. MATERIALS NO. PART NAME DESCRIPTION
1 Housing High Temperature Thermoplastic, UL94V-0, Black
2 Contact Brass, Gold under Nickel plating
3 Shell Brass, Nickel plated
4 Nut Brass, Nickel plated
5 O-RING Rubber
6 EPOXY EF400 A&B
Rated voltage Refer to the product drawing Rated current Refer to the product drawing Operating temperature -40°C to +85°C Storage temperature -40°C to +85°C Durability 100 cycles ELECTRICAL Item Requirement Test Condition Temperature rise test 30°C max. change allowed at rated current Sample mated, to measure the current when the temperature rise of the terminal within 30°C Dielectric withstanding voltage No evidence of flash over or insulation shall take place. Current leakage: 1mA max. IEC 60512, Test 4a Standard atmospheric conditions Mated connectors 2 to 4 ways= 1.4kVAC 5 to 6 ways= 1kVAC
The information contained herein is exclusive property of. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 ‐2 ‐ 6 to 8 ways=0.65kVAC 9 to 17 ways=0.5kVAC Contact resistance 15m Ω max. IEC 60512, Test 2a Standard atmospheric conditions Insulation resistance 100M Ω min. IEC 60512, Test 3a, Method A Standard atmospheric conditions Test voltage 500V±15VDC MECHANICAL Item Requirement Test Condition Durability 100cycles no evidence of physical damage. Contact resistance 15mΩ max IEC 60512, Test 9a Standard atmospheric conditions Max. speed of operations = 10 mm/s Rest: 30 s, unmated ENVIRONMENTAL Item Requirement Test Condition IP degree of protection IPX7 IEC 60529 Sample condition: mated Put the testing sample under water 1m, duration 30 minutes Thermal shock Finish Contact resistance 15mΩ max Insulation resistance 100MΩ min Sample condition: mated Humidity test (Steady state) Finish Contact resistance 15mΩ max Insulation resistance 100MΩ min Temperature: 40°C Humidity: 90% R.H. Duration: 96hours Humidity cycling test Finish Contact resistance 15mΩ max Insulation resistance 100MΩ min Sample condition: mated
The information contained herein is exclusive property of. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 ‐3 ‐ Heat Finish Contact resistance 15mΩ max Insulation resistance 100MΩ min Sample condition: mated Temperature: 85°C Duration: 96hours Cold Finish Contact resistance 15mΩ max Insulation resistance 100MΩ min Sample condition: mated Temperature: -40°C Duration: 96hours Salt spray Finish Contact resistance 15mΩ max No damage Sample condition: mated Temperature: 35°C Salt solution concentration: 5% (by weight) pH value(avg.): 6.5~7.2 spray volume(avg.): 1.0~2.0ml/hour duration: 48hours SOLDER ABILITY Item Requirement Test Condition Solder ability 95%of immersed area must show no voids, pin holes. DIP solder tails into the molten solder (held at 230±5°C) up to 0.5mm from the tip of tails for 3±0.5 seconds.