123A-85H ATTEND | Alldatasheet

Document overview

  • PDF pages: 4

Technical content

The information contained herein is exclusive property of ATTEND. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 -1 - SPECIFICATION AND PERFORMANCE Series 123A 85H Series File 123A-85H Series_SPEC_4 Date 2019/06/11 Scope: This specification covers the requirements for product performance, test methods and quality assurance provisions of P/N Descriptions 123A-85AA0 M2 CONNECTOR, A KEY, 0.5 PITCH, H8.5mm 123A-85BA0 M2 CONNECTOR, B KEY, 0.5 PITCH, H8.5mm 123A-85EA0 M2 CONNECTOR, E KEY, 0.5 PITCH, H8.5mm 123A-85MA0 M2 CONNECTOR, M KEY, 0.5 PITCH, H8.5mm Performance and Descriptions: The product is designed to meet the electrical, mechanical and environmental performance requirements specification. Unless otherwise specified, all tests are performed at ambient environmental conditions. RoHS: All material in according with the RoHS environment related substances list controlled. MATERIALS NO. PART NAME DESCRIPTION

1 Housing LCP E6808, UL94V-0, Black

2 Contact Phosphor Bronze C5210, gold flash plating on contact & solder area, 50u”

min. nickel under-plating over all 3 Hold down Brass C2680, 50u”min. matte tin plating under 50u” min. nickel plating RATING Rated Voltage 50VAC Rated Current 0.5A Operating Temperature -40°C TO +85°C Storage Temperature -40°C TO +85°C Durability 60 CYCLES ELECTRICAL Item Requirement Test Condition Low Level Contact Resistance Initial: 55mΩ max. After test: ᇞR 20 mΩ max. Subject mated contacts assembled in housing to closed circuit current of 100mA (max) at open circuit voltage of 20mV voltage (max.) EIA 364-23

The information contained herein is exclusive property of. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 -2 - Insulation Resistance 500 M Ω Min. Measured by applying 500V DC for 2 minutes between adjacent contacts of unmated connector. (EIA-364-21) Dielectric withstanding Voltage No breakdown Apply [300V] AC (rms) for 1 minute between adjacent contacts of ummated connector. (EIA-364-20). MECHANICAL Item Requirement Test Condition Mating Force/ Unmating Force 2.04Kgf(20N) Max Operation Speed: [25.4] mm/min. Measure the force required to mate/unmate connector. (EIA-364-13) Durability No evidence of physical damage Operation Speed: [500+/-50] cycle per hour. Durability Cycles：60 Cycles (EIA-364-09). Vibration Appearance: no damage Discontinuity: 1 microsecond Max

15 Minutes in each of 3 mutually perpendicular

Direction both mating halvesd should be rigidly fixed so as not to contribute to the relative motion of one contact against another. EIA-364-28 Test condition VII test condition letter D Mechanical Shock Appearance: no damage Discontinuity: 1 microsecond Max Pulse width: 2msec Wave form:285 G 3 strokes in X eY and Z axes by 2 direction (EIA-364-27) ENVIRONMENTAL Item Requirement Test Condition Solder ability 95% min. of solder area 10x the magnifying glass of view Soldering time : 4~5 second Solder Temperature: 245±5˚C (EIA-364-52) Thermal Shock No evidence of physical damage Mated Connectors Perform this cycle, repeat 10 cycles (EIA-364-32) Temperature Life No evidence of physical damage Mated Connector 105℃, 96 hours, (EIA-364-17) Humidity No evidence of physical damage Subject mated Connectors to 96 hours at 40℃ with 90~95% RH. (EIA-364-31)

The information contained herein is exclusive property of. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 -3 - Salt Spray No detrimental corrosion allowed in contact area and base metal exposed Subject mated connectors to 35+/-2℃ and 5+/- 1% salt condition for 48hours. After test, rinse the sample with water and recondition the room temperature for 1 hour. (EIA-364-26B) Mixed flowing gas Contact Resistance ᇞR=20 mΩMax.(Final) Mated connectors, Duration: 120 hours (EIA-364-65, class IIA) Resistance to Reflow Soldering Heat No physical damage shall occur. Test Initial and final, Coplanarity of product shall meet requirements of applicable product drawing and specification. Test connector on PCB Pre-heat:150~180˚C, 90±30sec. Heat: 230 ˚C Min, 30±10sec. Peak temp: 260 ˚C Max. 3~5sec.

The information contained herein is exclusive property of. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 -4 - Preheating temperature: 150 ~ 200°C, 60~120 seconds Liquidus temperature (TL): 217°C, 60~150 seconds Peak temperature: 260°C Time within 5 °C of peak temperature (Tc): 255°C, 30seconds