112C-TXAR-R02

112C-TXAR-R02 ATTEND | Alldatasheet

Document overview

• Manufacturer or author: willis
• PDF pages: 7

Technical content

SERIES: 112C-TXAR-R02 FILE: 112C-TXAR-R02_spec SPECIFICATION AND PERFORMANCE DATE: 2012/10/25 The information contained herein is exclusive property of. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 ‐1 ‐ Scope: This specification covers the requirements for product performance, test methods and quality assurance provisions of 112C-TXAR-R02. Performance and Descriptions: The product is designed to meet the electrical, mechanical and environmental performance requirements specification. Unless otherwise specified, all tests are performed at ambient environmental conditions. ROHS: All material in according with the ROHS environment related substances list controlled. MATERIAL AND FINISH INSULATOR Material Housing: LCP UL 94V-0 Black Material Contact: Phosphor Bronze C5210 CONTACT Plating Gold plated overall. Material Fork: Stainless Steel Shell: Stainless steel t=0.2mm SHELL OR COVER Plating Tin plated over Nickel. RATING Current rating : 0.5A max. Voltage rating : 10V DC Operating Temperature : －40℃∼＋ 85℃ Storage Temperature : －40℃∼＋ 85℃

SERIES: 112C-TXAR-R02 FILE: 112C-TXAR-R02_spec SPECIFICATION AND PERFORMANCE DATE: 2012/10/25 The information contained herein is exclusive property of. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 ‐2 ‐ ELECTRICAL Item Requirement Test Condition Contact Resistance 80mΩ Max. The T-FLASH SOCKET and T-FLASHCARD were mated. Low-level current was applied and resistance measurements were taken. (20mV Max., 10mA) EIA-RS -364-23A Insulation Resistance 1000MΩ Min. Test between adjacent contacts on unmated connectors at the potential of 500V DC. It was applied between all contacts. EIA-RS-364-21A Dielectric Withstanding Voltage 1. 500V AC R.M.S. for one minute. 2. No evidence of flashover or breakdown. The potential was applied between adjacent contacts of the connector for one minute. EIA- RS-364-20A MECHANICAL Item Requirement Test Condition Durability 1. Appearance : No evidence of physical damage. 2.Contact resistance: 100mΩ Max(Finally). Mating and un mating samples for 5000 cycles at maximum rate of 600 cycles per hour. EIA- RS-364-09A Vibration 1.Appearance : No evidence of physical damage. 2.Open circuit less than 1 microsecond. The entire frequency range, from 10 to 55 Hz and return to 10Hz shall be traversed in approximately 1 minute. This motion shall be applied for 2 hours in each of 3 mutually perpendicular directions. (total of 6 hours) Amplitude: 1.50mm Max. EIA-RS-364-28A, Condition Ⅰ

SERIES: 112C-TXAR-R02 FILE: 112C-TXAR-R02_spec SPECIFICATION AND PERFORMANCE DATE: 2012/10/25 The information contained herein is exclusive property of. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 ‐3 ‐ Retention Force 100 gf/pin Min. Apply axial pull out force at the speed r ate of 25±3 mm/minute. EIA-364-05 Mechanical Shock Contact Resistance: 100mΩ max Appearance: No visual damage Discontinuity: 1.0 μsec Max. Mate connector and subject the following shock conditions. 3 shocks shall be applied along 3 mutually perpendicular axes. Test pulse: Half Sine Peak value: 490 m/s 2 (50 G) Velocity change: 3.44 m/s Pulse duration: 11 msec EIA -364-27, test condition A ENVIRONMENTAL Item Requirement Test Condition Temperature Life( Heat ) 1.Appearance : No evidence of physical damage. 2.Contact Resistance: 100mΩ Max.(Finally) 3.Insulation Resistance: 100MΩ Min. The specimens shall be subjected to a temperature of 85℃ for 96 hours, then placed in ambient temperature for more than 3 hours. MIL-STD-1344A, Method 1005.1 Temperature Life( Cold ) 1.Appearance : No evidence of physical damage. 2.Contact Resistance: 100mΩ Max.(Finally) 3.Insulation Resistance: The specimens shall be subjected to a temperature of -25℃ for 96 hours, then placed in ambient temperature for more than 3 hours. MIL-STD-1344A, Method 1005.1

SERIES: 112C-TXAR-R02 FILE: 112C-TXAR-R02_spec SPECIFICATION AND PERFORMANCE DATE: 2012/10/25 The information contained herein is exclusive property of. Do not copy and print except that Attend accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。 ‐4 ‐ 100MΩ Min. Humidity 1.Appearance : No evidence of physical damage. 2. Contact resistance: 100mΩ Max. 3.Insulation resistance: 100MΩ Min. The specimens shall be placed in a No evidence of chamber and subjected to a relative humidity of 90% to 95% and a temperature of 40±2℃ for 96 hours, then placed in ambient temperature for more than 1 hour. EIA-RS-364-31A Salt Spray Contact resistance: 100mΩ Max(Finally). The specimens shall be subjected to a salt water spray (concentration : 5±1%) at a temperature of 35±2℃ for 24 hours, then placed in ambient temperature for more than 1 hour. EIA-RS-364-26A SOLDER ABILITY Item Requirement Test Condition Solder ability 1. Appearance: No evidence of Physical damage. 2. More than 95% of the solder able area shall be covered with solder. After 5~10 seconds flux deep. Subject connector lead to solder bath at 235°C±3°C for 5±0.5 seconds. MIL-STD-202F, Method 208 Resistance to Soldering heat No evidence of Physical damage. The connector shall be tested resistance. To soldering heat in the following conditions. For RoHS 260℃ 10±0.5 seconds.