DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 48

Technical content

ZMOTION® Lenses Copyright ©2014 Zilog, Inc. All rights reserved. www.zilog.com

ZMOTION® Lenses Product Specification ii DO NOT USE THIS PRODUCT IN LIFE SUPPORT SYSTEMS. LIFE SUPPORT POLICY ZILOG'S PRODUCTS ARE NOT AUTHORIZED FO R USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT TH E EXPRESS PRIOR WRITTEN APPROV AL OF THE PRESIDENT AND GENERAL COUNSEL OF ZILOG CORPORATION. As used herein Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the fa ilure of the life support device or system or to affect its safety or effectiveness. Document Disclaimer ©2014 Zilog, Inc All rights reserved. Information in this publication concerning the devices, applications, or technology described is intended to suggest possible uses and ma y be superseded. ZILOG , INC. DOES NOT ASSUME LIABILITY FOR OR PROVIDE A REPRESENTATION OF ACCURACY OF THE INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZILOG ALSO DOES NOT ASSUME LIABILITY FOR INTELLECTUAL PROPERTY INFRINGEMENT RELATED IN ANY MANNER TO USE OF INFORMATI ON, DEVICES, OR TECHNOLOGY DESCRIBED HEREIN OR OTHERWISE. The information contained within this document has been verified according to the general principles of electrical and mechanical engineering. ZMOTION and Z8 Encore! XP are trademarks or registered trademarks of Zilog, Inc. (An IXYS Company). All other product or service names are the property of their respective owners. Warning:

ZMOTION® Lenses Product Specification iii

Revision History

Each instance in the revision history table reflects a change to this document from its pre- vious revision. For more details, refer to the corresponding pages or appropriate links pro- vided in the table below. Date Revision Level Description Page Nov 2014

10 Changed focus of spec to cover ZMOTION lenses only; see

related ZMOTION Pyroelectric Sensors Product Specification (PS0336). All Feb 2013

09 Moved NCL-11 lens specification to Table 1

; added the CM

0.77 GI V2 lens specification; alphanumerically reordered all

lenses. 2, 7 May 2012 08 Added the NCL-11 and EWA 0.3 GI V2 lens specifications. 35 , 17 Nov 2011 07 Added the NCL-3R and NCL- 10S lens specifications. 21 , 33 Mar 2011 06 Intrusion lens specifications added. 37 Jan 2011

05 Modifications to some lens/sensor descriptions in Table 1

. 2 Jan 2011 04 Updated to include two new Nicera sensors. 18, 28 Nov 2010

03 Updated to new Zilo g/IXYS logo and accepted Zilog style;

replaced all instances of ePIR with advanced passive infrared. All Sep 2010

02 Replaced Zilog logos, ePIR with ZMOTION, and Zdots with

Module; fixed formatting and pagination issues; removed references to GP and General Purpose. All Oct 2010

01 Original issue All

PS028610-1114 Table of Contents ZMOTION® Lenses Product Specification iv Table of Contents

ZMOTION® Lenses Product Specification Overview Zilog’s ZMOTION Detection and Control and Intrusion Detection product families pro- vide integrated and flexible solutions for Passive Infrared (PIR)-based motion detection applications. These product families are based on the ZMOTION MCU, a high-perfor- mance microcontroller featuring integrated PIR motion detection algorithms. Each family includes a selection of lenses and PIR sensors to fit a wide range of application require- ments. Each lens combination is optimized for its intended application by configuration settings loaded into the ZMOTION MCU ensuring the best possible performance while significantly reducing development risk and minimizing time to market. Zilog’s PIR Motion Detection Technology provides a dramatic improvement in both sensitivity and stability over traditional designs and is scalable to many market segments including Secu- rity/Intrusion Detection, Lighting Control, HV AC, Access Control, Vending, Display, Proximity, Power Management, Occupancy Sensing and many others. This document provides the zone patterns and mechanical dimensions for the Zilog-sup- ported lenses included in the ZMOTION Family. Each supported lens combination is pro- vided with an associated configuration file for the ZMOTION MCU. It is possible to use other lenses not directly supported by Zilog by developing the appropriate configuration settings based on one of the existing files. There are two general groups of lenses provided:

  • ZMOTION Detection and Control for general motion detection applications
  • ZMOTION Intrusion Detection for security applications These lens groupings are based on typical usage; any of these lenses could be used for a variety of applications and are not limited to these suggested applications. All lenses listed in this document are available from Zilog or from their associated manufacturers. Because Zilog is regularly adding new lens support to these ZMOTION product families, please obtain the latest version of this document from our website at: www.zilog.com/ZMO- TION. To review the configuration files for specific lens and sensor combinations, refer to the ZMOTION Detection Lens and Pyroelectric Sensor Configuration Guide (WP0018). Note:

PS028610-1114 ZMOTION Lens Selection Guide ZMOTION® Lenses Product Specification ZMOTION Lens Selection Guide Select a lens and pyroelectric sensor based on the intended application from Table 1. Lenses for security/intrusion-related applications are listed in Table 2. To see the specifi- cations for lenses used in security and intrusion detection applications, refer to the ZMO- TION Pyroelectric Sensors Specification (PS0336). Table 1. ZMOTION Detection and Control Lenses

Applications

Sensor(s) Manufacturer and MFR Part Number ZAA09GIT1 Lens Specification – see page 6 Animal Alley Array (88°)

  • 35.6mm x 49.9mm Flat Fresnel lens
  • 22.9mm focal length
  • 25 meter range
  • 22 equal segments Corner wall mount or very high ceiling with rectangular floor pattern
  • Warehouse Lighting (Bay Light)
  • Combined Intrusion and Lighting Control
  • HVAC ZRE200BP ZSBG446671 Fresnel Technologies Inc. AA 0.9 GI T1 ZCM077GIV2 Lens Specification – see page 7 Ceiling Mount Array (360°)
  • 37mm diameter circular lens
  • 19.6 mm focal length
  • 12.2 m radius at 3.7 m height
  • 4:1 floor coverage diameter-to-height ratio Low height ceiling mount for commercial lighting control
  • Commercial HVAC ZSBG446671 Fresnel Technologies Inc. CM 0.77 GI V2 ZCM077GIV3 Lens Specification – see page 9 Ceiling Mount Array (360°)
  • 37mm diameter circular lens
  • 19.6mm focal length
  • 3.7m radius at 2.4m height
  • 3:1 floor coverage diameter to height ratio Ceiling Mount for standard commercial heights
  • Lighting Control
  • HVAC Control
  • Meeting rooms ZSBG446671 Fresnel Technologies Inc. CM 0.77 GI V3

PS028610-1114 ZMOTION Lens Selection Guide ZMOTION® Lenses Product Specification ZCM077GIV5 Lens Specification – see page 11 Ceiling Mount Array (360°)

  • 37mm diameter circular lens
  • 19.6mm focal length
  • 12.2m radius at 12.2m height
  • 2:1 floor coverage diameter to height ratio High ceiling mount for commercial and industrial
  • Commercial Lighting Control
  • Commercial HVAC Control ZSBG446671 Fresnel Technologies Inc. CM 0.77 GI V5 ZCWM05GIV1 Lens Specification – see page 14 Ceiling Mount Array (360° oval pattern)
  • Wall mount array (~100°, ~8m coverage)
  • Circular lens with 24mm x 24mm square base
  • 14.2mm focal length
  • Board mount clip-in Wall or ceiling mount for office or meeting room
  • Room Lighting and HVAC Control ZRE200BP ZSBG323671 Fresnel Technologies Inc. CWM 0.5 GI ZEWA03GIV2 Lens Specification – see page 17 Extra Wide Angle Wall Mount Array (180°)
  • 14mm x 28mm
  • 7.6mm focal length
  • 5 meter range
  • 16 equal segments Room occupancy and proximity sensing 180° detection with a single pyro
  • Wall mount room lighting control
  • AC light switch replacement
  • Hotel room thermostats ZRE200BP ZSBG323671 Fresnel Technologies Inc. EWA 0.3 GI V2 ZNCL3B Lens Specification – see page 18 10mm wall mount array (60° x 60°)
  • Clips on to pyroelectric sensor
  • 2 beams (X); 2 beams (Y)
  • 10m range Proximity or Entrance Detection
  • Kiosk
  • Vending
  • HVAC
  • Display counters
  • Under-cabinet Lighting ZRE200BP ZSBG323671 Nippon Ceramic Co., Ltd. (Nicera) NCL-3B ZNCL10R Lens Specification – see page 21 10mm Ceiling Mount
  • Array (90° x 77°)
  • Clips on to pyroelectric sensor Proximity or Entrance Detection
  • HVAC
  • Display counters
  • Lighting Controls ZSBG446671 ZRE200BP ZSBG323671 Nippon Ceramic Co., Ltd. (Nicera) NCL-10R

Table 1. ZMOTION Detection and Control Lenses (Continued) Sensor(s) Manufacturer and MFR Part Number

PS028610-1114 ZMOTION Lens Selection Guide ZMOTION® Lenses Product Specification ZNCL926 Lens Specification – see page 25 Clip-on 15mm Array (360°)

  • Clips on to pyroelectric sensor
  • 2.5m radius at 2.5m height
  • 2:1 Floor coverage diameter to height ratio Room Occupancy and Proximity Sensing
  • Lighting Control
  • HVAC Control
  • Appliance
  • Kiosk/Display Control
  • Vending Power Management
  • Appliance
  • Power Management ZRE200BP ZSBG323671 ZSBG446671 Nippon Ceramic Co., Ltd. (Nicera) NCL-9(26) ZNCL10IL Lens Specification – see page 28 10mm Wall/Ceiling Mount Array (80° x 30°)
  • Clips on to pyroelectric sensor
  • 6 beams (X); 2 beams (Y)
  • 10m range Proximity or Entrance Detection
  • Kiosk
  • Vending
  • HVAC
  • Display counters ZRE200BP ZSBG323671 Nippon Ceramic Co., Ltd. (Nicera) NCL-10IL ZNCL10S Lens Specification – see page 33 10mm wall mount (27°) directional
  • Clips on to pyroelectric sensor
  • 2 beams (X), 1 beam (Y)
  • 10m range Entrance detection Kiosk Vending HVAC Display counters Directional Detection ZRE200BP ZSBG323671 Nippon Ceramic Co., Ltd. (Nicera) NCL-10S ZNCL11 Lens Specification – see page 35 Wall mount array 104° (X), 37° (Y)
  • 32 detection zones
  • Circuit board mount, black rectangular lens
  • 4m range Room occupancy and proximity sensing
  • Consumer electronics and appliance power management
  • Display power management
  • TV auto shutoff
  • Keypad motion detector ZRE200BP ZSBG323671 Nippon Ceramic Co., Ltd. (Nicera) NCL-11

Sensor(s) Manufacturer and MFR Part Number

TION Intrusion Detection Lens Specifications section on page 37. Table 2. ZMOTION Intrusion Detection Lenses

  • Pet immunity detector
  • Wide-area security motion detector ZRE200BP ZSBG446671 Fresnel Technologies Inc. WA 1.2 GI 12

Figure 1. The ZAA09GIT1 Lens Specification

applications in which high floor coverage is required. See Figures 2 and 3. Figure 2. The ZCM077GIV2 Lens Specification: Front View

Figure 3. The ZCM077GIV2 Lens Specification: Floor Coverage, Side View

from the center line to the placement notch is 15 degrees. Figure 4. The ZCM077GIV3 Lens Specification, #1 of 2

Figure 5. The ZCM077GIV3 Lens Specification, #2 of 2

flange should be 0.46" (11.7 mm) from the pyroelectric sensor’s element. Figure 6. The ZCM077GIV5 Lens Specification, #1 of 3

Figure 7. The ZCM077GIV5 Lens Specification, #2 of 3

Figure 8. The ZCM077GIV5 Lens Specification, #3 of 3

intended to clip directly into the circuit board over top of the pyroelectric sensor. Figure 9. The ZCWM05GIV1 Lens Specification: Wall Mount

Figure 10. The ZCWM05GIV1 Lens Specification: Ceiling Mount, #1 of 2

Figure 11. The ZCWM05GIV1 Lens Specification: Ceiling Mount, #2 of 2

ing applications in which an extra-wide sensing angle is required. See Figure 12. Figure 12. The ZEWA03GIV2 Lens Specification, Dimensions

Figure 13. The ZNCL3B Lens Dimensions

Figure 14. The ZNCL3B Lens Specification, X Axis

Figure 15. The ZNCL3B Lens Specification, Y Axis

pyroelectric sensor to provide different beam patterns. Figures 16 through 19. Figure 16. The ZNCL10R Lens Specification, Dimensions

Figure 17. The ZNCL10R Dual-Element Lens Specification, Tab Direction A

Figure 18. The ZNCL10R Dual-Element Lens Specification, Tab Direction B

Figure 19. The ZNCL10R Quad-Element Lens Specification, Tab Direction A, X Axis

sensing applications. It is optimized for both dual and quad element pyroelectric sensors. Figure 20. The ZNCL926 Lens Specification, Dimensions

Figure 21. The ZNCL926 Detection Area with Quad-Element PIR

Figure 22. The ZNCL926 Detection Area with Dual-Element PIR

Tab A beam patterns and to Figures 26 and 27 for the Tab B beam patterns. Figure 23. The ZNCL10IL Lens Specification, Dimensions

Figure 24. The ZNCL10IL Lens Specification, Tab Direction A, X Axis

Figure 25. The ZNCL10IL Lens Specification, Tab Direction A, Y Axis

Figure 26. The ZNCL10IL Lens Specification, Tab Direction B, X Axis

Figure 27. The ZNCL10IL Lens Specification, Tab Direction B, Y Axis

directional recognition is required. See Figures 28 and 29. Figure 28. The ZNCL10S Lens Specification, Dimensions

Figure 29. The ZNCL10S Dual-Element Lens Specification, X/Y Axes

applications with 32 detection zones. See Figures 30 and 31. Figure 30. The ZNCL11 Lens Specification, Dimensions

Figure 31. The ZNCL11 Detection Area, X/Y Axes

PS028610-1114 ZMOTION Intrusion Detection Lens Specifications ZMOTION® Lenses Product Specification ZMOTION Intrusion Detection Lens Specifications Figures 32 through 34 provide the zone patterns and mechanical dimensions for the ZMO- TION Intrusion Detection family of products. Recommended placement of the pyroelectric sensor is provided with the detector and lens inclined downward at an angle of 12 degrees. If you wish to use a tilt angle other than 12 degrees while maintaining the specified zone patterns, move the pyroelectric sensor up by 0.021" (0.53 mm) for each degree less than 12 degrees, or down by the same amount for each degree greater than 12 degrees. The ZLR12GI12V3, ZVB12GIV1, and ZWA12GI12V4 lenses can be interchanged in the same end product without modifications to the placement or angle of the lens. These lenses may also be used in nonintrusion applications. For additional lenses that do not require security/intrusion detection capabilities, refer to the ZMOTION Detection and Control Lens Specifications section on page 5.

Figure 32. ZLR12GI12V3 Lens Specification

Figure 33. ZVB12GIV1 Lens Specification

detector, and curved at a 1.2 inch (30.5 mm) radius about the sensitive area of the detector. tor position should be 0.812" (20.6 mm) below the upper edge, and centered left-to-right. Figure 34. ZWA12GI12V4 Lens Specification

PS028610-1114 Related Documents ZMOTION® Lenses Product Specification Related Documents Additional information about the ZMOTION Families of Motion Detection MCUs can be found in the following documents, which are available from the Zilog website. Document Number Description PB0225 ZMOTION Detection and Control Family Product Brief PB0230 ZMOTION Intrusion Detection Product Brief PS0228 Z8 Encore! XP® F082A Series Product Specification PS0285 ZMOTION Detection and Control Family Product Specification PS0288 ZMOTION Intrusion Detection Product Specification PS0336 ZMOTION Pyroelectric Sensors Specification AN0307 ZMOTION Detection Module Application Walkthrough AN0309 ZMOTION High Brightness White LED Lighting Application Note WP0017 A New PIR Motion Detection Architecture White Paper WP0018 ZMOTION Detection Lens and Pyro Sensor Configuration Guide Other ZMOTION Family Products PB0244 ZMOTION Detection Module II Product Brief PS0305 ZMOTION Detection Module II Product Specification

PS028610-1114 Customer Support ZMOTION® Lenses Product Specification Customer Support To share comments, get your technical questions answered, or report issues you may be experiencing with our products, please visit Zilog’s Technical Support page at  http://support.zilog.com. To learn more about this product, find additional documentation, or to discover other fac- ets about Zilog product offerings, please visit the Zilog Knowledge Base at http:// zilog.com/kb or consider participating in the Zilog Forum at http://zilog.com/forum. This publication is subject to replacement by a later edition. To determine whether a later edition exists, please visit the Zilog website at http://www.zilog.com.