Z2W121-RC-10 SUPERWORLD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
(a) (c)(b) (e) (d) 1. PART NO. EXPRESSION : (b) Dimension code (c) Material code (a) Series code 2. CONFIGURATION & DIMENSIONS : 4. MATERIALS : SUPERWORLD ELECTRONICS (S) PTE LTD (a) Body : Ferrite (b) Termination : Ag/Ni/Sn a 3. SCHEMATIC : (e) R : Reel (f) Current code : C = 300mA 5. GENERAL SPECIFICATION : b) Rated current : Base on temp. rise a) Temp. rise : 30°C Max. Z2 SERIESFERRITE CHIP BEADS PG. 1 NOTE : Specifications subject to change without notice. Please check our website for latest information. 03.07.2008 PCB Pattern H G 0.80±0.15 BD GHL Unit:m/m L 1.60±0.15 A C 0.80±0.15 C A D B 0.30±0.20 b Ag(100%) Ni(100%)-1.5um(min.) Sn(100%)-3.0um(min.) c) Storage temp. : -55°C to +125°C d) Operating temp. : -55°C to +125°C e) Resistance to solder heat : 260°C.10secs (f) (g) (d) Impedance code : 121 = 120ȍ (g) 10 : Lead Free
FREQ UEN CY(M Hz ) 20 0 40 0 60 0 80 0 I MPEDANCE (Oh m) FCM1608W-301T02 Z R X Z2W301 -RC- 00Z2W301 -RC-1 0 SUPERWORLD ELECTRONICS (S) PTE LTD FERRITE CHIP BEADS Z2 SERIES NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 2 03.07.2008 6. ELECTRICAL CHARACTERISTICS : 7. IMPEDANCE VS. FREQUENCY CURVES : 800 ±25%0603Z2W801-RA-10 Z2W102-RA-10 1000 ±25%0603 Z2W471-RB-10 Z2W601-RB-10 Z2W221-RB-10 Z2W301-RC-10 Z2W151-RC-10 Z2W121-RC-10 Part Number 600 ±25% 470 ±25% 220 ±25% 300 ±25% 150 ±25% 120 ±25% Impedance 0603 0603 0603 0603 0603 0603 Size EIA ( ȍ ) 1000.80100 100 0.90 100 DC Resistance 100 100 100 100 ( MHz ) Frequency Test 100 100 0.55 0.70 0.35 0.45 Max. ( ȍ ) 0.30 0.25 200 200 200 250 250 300 Max. ( mA ) Rated Current 1 10 100 1 000 FREQ UEN CY(M Hz ) 10 0 20 0 30 0 I MPEDANCE (Oh m) FCM1608W-121T03 Z R X Z2W121 -RC- 00Z2W1 21 -RC-1 0 11 0 1 0 0 1 0 0 0 FREQ UEN CY(M Hz ) 10 0 20 0 30 0 40 0 I MPEDANCE(Ohm) FCM1608W-151T02 Z R X Z2W151 -RC- 00Z2W1 51 -RC-1 0 1 10 100 1000 FREQUENCY(MHz ) 100 200 300 400 IMPEDANCE(Ohm) FCM1608W-221T02 Z R X Z2W221-RB-10 Packaging : Paper Carrier Tape
NOTE : Specifications subject to change without notice. Please check our website for latest information. SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 03.07.2008 FERRITE CHIP BEADS Z2 SERIES 7. IMPEDANCE VS. FREQUENCY CURVES : 1 10 100 1000 FREQUENCY(MHz) 200 400 600 800 1 000 IMPEDANCE(Ohm) FCM1608W-471T02 Z R X Z2W471 -R B-00Z2W471 -RB-1 0 1 1 0 100 1000 FREQUENCY( MHz) 200 400 600 800 10 0 0 IMP EDANCE (Oh m) FCM1608W- 601T 02 Z R X Z2 W6 01 -RB- 00Z2W601 -RB-1 0 1 10 1 00 1 000 FREQUENCY( MHz) 200 400 600 800 10 0 0 IMPEDANCE(Ohm) FCM1608W -801T 01 Z R X Z2W801 -RA-00Z2W801 -RA-1 0 1 10 100 1000 FREQUENCY(MHz) 200 400 600 800 1 000 1 200 IMPEDANCE(Ohm) FCM1608W-102T01 Z R X Z2W 1 02-RA-00Z2W1 02-RA-1 0
NOTE : Specifications subject to change without notice. Please check our website for latest information. SUPERWORLD ELECTRONICS (S) PTE LTD PG. 4 03.07.2008 FERRITE CHIP BEADS Z2 SERIES 8. RELIABILITY & TEST CONDITION : Bending 40(1.575) not be damaged by the forces applied on the The terminal electrode & the dielectric mustFlexture Strength 100(3.937) 45(1.772) right conditions. 45(1.772) 20(.787) Solder a chip on a test substrate, bend the substrate by 2mm (0.079in) and return. TEST CONDITIONPERFORMANCE not be damaged by the forces applied on the The terminal electrode & the dielectric must More than 90% of the terminal electrode Refer to standard electrical characteristics list Appearance : No significant abnormality 10±0.5 seconds seconds Terminal Strength Solderability right conditions. W should be covered with solder. seconds Preheating 245°C 150°C 4±1.0 seconds cooling Dipping Natural Solder Heat Resistance Temperature Rise Test Electrical Characteristics Test Rated Current DC Resistance Impedance Preheating Impedance change : Within ±30% 30°C max. (ǻt) 260°C 150°C Dipping cooling Natural For Z Series : Force (Kfg) 1.04 2.0 1.5 1.0 1.0 Size 0.5 0.6 0.2 > 25 Time (sec) Solder : Sn-Ag3.0-Cu0.5 Flux for lead free : rosin Dip Time : 4±1sec. Preheat : 150°C, 60sec. Solder Temperature : 245±5°C 2. Temperature measured by digital surface thermometer. Flux for lead free : rosin Dip Time : 10±0.5sec. Preheat : 150°C, 60sec. Solder : Sn-Ag3.0-Cu0.5 Solder Temperature : 260±5°C 1. Applied the allowed DC current. HP4291A, HP4287A+16092A HP4338B No mechanical damage Remaining terminal electrode : 70% min. W ITEM
SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 5 03.07.2008 FERRITE CHIP BEADS Z2 SERIES Derating Curve For the ferrite chip bead which withstanding current over 1.5A, as the operating temperature over 85°C, the derating current information is necessary to consider with. For the detail derating of current, please refer to the Derated Current vs. Operating Temperature curve. not be allowed. Impedance : Within ±30% Appearance : Cracking, shipping & any other defects harmful to the characteristics should The ferrite should not be damaged by forces applied on the right condition. Random Vibration Test Bending Strength ITEM directions (Total 6 hours). Amplitude : 1.52mm Frequency : 10-55-10Hz for 1 min. Directions & times : X, Y, Z directions for 2 hours. A period of 2 hours in each of 3 mutually perpendicular A 2.70 (0.106) 2.00 (0.079) 1.40 (0.055) 2.5 2.5 1.0 Series name PERFORMANCE TEST CONDITION P-Kgfmm (inches) 0.80 (0.033) 0.3 Chip height of 75cm. Drop 10 times on a concrete floor from aDrop a. No mechanical damage b. Impedance change : ±30% Appearance : No damage. Impedance : Within ±30% of initial value.Temperature Loading at High Humidity : 90~95% RH. Temperature : 40±2°C Duration : 500±12hrs Duration : 500±12hrs Applied Current : rated current Temperature : 125±5°C Measured at room temperature after placing for 2 to 3hrs. Measured at room temperature after placing for 2 to 3hrs. Humidity Measured : 5 times Appearance : No damage. Phase Impedance : Within ±30% of initial value. Low temperature storage test Thermal Shock Number of cycles : 5 Step2 : +125±5°C 30±3 min. Duration : 500±12hrs Temperature : -55±2°C Measured at room temperature after placing for 2 to 3hrs. Measured at room temperature after placing for 2 to 3hrs.+125±5°C -55±2°C 30±3 30±3 For Z Series : Step1 : -55±2°C 30±3 min. Condition for 1 cycle Temperature (°C) Times (min.) height of 75cm. Drop 10 times on a concrete floor from aDrop a. No mechanical damage b. Impedance change : ±30% 8. RELIABILITY & TEST CONDITION : 1.5A 4A4 Derating Derated Current(A) Operating Temperature(¢XC) 12585 Operating Temperature(°C)
SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 7 03.07.2008 FERRITE CHIP BEADS Z2 SERIES may cause the failure of mechanical or electrical perform ance. Solder shall be used not to be exceed as shown in Fig. 4. Accordingly increasing the solder volume, the mechanical st ress to product is also increased. Exceeding solder volume Figure 4 Recommendable Upper limit t 9-3. Solder Volume
- PACKAGING INFORMATION : SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 8 03.07.2008 FERRITE CHIP BEADS Z2 SERIES 10-1. Reel Dimension 7" x 12mm R0.5 R10.5 13.5±0.5 7" x 8mm D B 7" x 8mm C 120° 7" x 12mm R1.9 2±0.5 A 178.0±2.0 178.0±2.0 60.0±2.0 B(mm) 60.0±2.0 13.5±0.5 9.0±0.5 A(mm)Type 13.5±0.5 13.5±0.5 C(mm) D(mm) Material : Paper P Po:4±0.1 Material : Plastic Po:4±0.1 P D1:1.5±0.1 10-2.1 Tape Dimension / 12mm 10-2 Tape Dimension / 8mm F:5.5±0.05 E:1.75±0.1 D:1.5+0.1 P2:2±0.05 F:3.5±0.05 E:1.75±0.1 P2:2±0.1 F:3.5±0.1 E:1.75±0.1 4.0±0.1 P(mm) 4.0±0.1 4.0±0.1 4.0±0.1 4.0±0.1 8.0±0.1 4.0±0.1 P(mm) 8.0±0.1 Z / L Series Bo W:12.0±0.1 P AoA Ko Section A-A P2:2±0.05 A Po:4±0.1 t Bo(mm)Size 4.95±0.1 4.95±0.1 Ao(mm) Ko(mm) 1.85±0.1 1.93±0.1 3.66±0.1 1.93±0.1 Series Z / L Bo W:8.0±0.1 Ao D1:1±0.1 A Section A-A Ko A D:1.5+0.1 t 1.50±0.10 1.88±0.10 3(12) 2.35±0.10 3.50±0.10 1.55±0.10 1.45±0.10 1.27±0.10 1.05±0.102 Size 1.95±0.10 Bo(mm) Ko(mm) 1.05±0.10 Ao(mm) 0.30±0.05 1.5±0.1 D1(mm)t(mm) 0.24±0.05 0.24±0.05 1.5±0.1 1.5±0.1 1.0±0.10.22±0.05 0.22±0.05 1.0±0.1 0.22±0.05 0.22±0.05 1.0±0.1 1.0±0.1 t(mm) 0.23±0.05 D1(mm) none 2.0±0.1 P(mm) 4.0±0.1 4.0±0.1 Series Z / L Ao D:1.56 +0.1 -0.05 Bo W:8.0±0.1 Ko t 0.62±0.03 1.50±0.05 3(09) 2.30±0.05 Size Bo(mm) 1.12±0.03 0.95±0.05 0.95±0.05 Ko(mm) 0.60±0.03 Ao(mm) none 0.95±0.05 0.95±0.05 none t(mm) 0.60±0.03 D1(mm) none
NOTE : Specifications subject to change without notice. Please check our website for latest information. SUPERWORLD ELECTRONICS (S) PTE LTD PG. 9 03.07.2008 FERRITE CHIP BEADS Z2 SERIES Application Notice a) Products should be handled with care to avoid damage or contamination from perspiration and skin oils. c) Bulk handling should ensure that abrasion and mechanical shock are minimized. b) The use of tweezers or vacuum pick up is strongly recommended for individual components. c) The packaging material should be kept where no chlorine or sulfur exists in the air. b) Recommended products should be used within 6 months from the time of delivery. a) Temperature and humidity conditions : -10 ~ 40°C and 30 ~ 70% RH. 2. Transportation : 1. Storage Conditions : To maintain the solderabililty of terminal electrodes : Base tape 10-4. Tearing Off Force Top cover tape 165° to 180° F Bulk (Bags) Chip Size Chip / Reel Inner Box Middle Box Carton 10-3. Packaging Quantity 12000 40000 20000 7000 40000 20000 20000 30000 40000 80000 62500 125000 1000 40004000 1000 8000 2000 2500 12500 The force for tearing off cover tape is 15 to 60 grams in the arrow direction under the following conditions. Tearing SpeedRoom Humidity 45~85 Room Temp. (°C) 5~35 (%) Room atm 860~1060 (hPa) 300 (mm/min) 10000 50000 300000 250000 500000 150000 200000 100000 50000 100000 50000 100000 75000 150000 200000 100000 200000 20000 3 (09) 4000 1000015000 3000 2000 3 (12)4 20000 4000