WPCN381U WINBOND | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

WPCN381U Legacy-Reduced SuperI/O with Fast Infrared Port, Two Serial Ports and GPIOs © 2006 Winbond Electronics Corporation www.winbond.com Product Brief December 2006 Revision 1.0 WPCN381U Legacy-Reduced SuperI/O with Fast Infrared Port, Two Serial Ports and GPIOs General Description The WPCN381U, a member of the Winbond LPC SuperI/O family, is targeted for legacy-reduced ultra-light portable ap- plications. The WPCN381U is PC2001 and ACPI compliant, and features a Fast Infrared port (FIR, IrDA 1.1 compliant), two Serial Ports and General-Purpose Input/Output (GPIO) support for a total of 11 ports. The WPCN381U is a “no-frills” solution for the new generation of notebook systems, providing just the essential functions. Outstanding Features ■ Pin and software compatible with the Winbond 87381 ■ Fast Infrared Port (FIR) ■ Two Serial Ports ■ LPC bus interface, based on Intel’s LPC Interface Specification Revision 1.1, August 2002 (supports CLKRUN and LPCPD signals) ■ PC2001 and ACPI Revision 3.0 compliant ■ 11 GPIO ports, including 6 with IRQ assertion capabil- ity ■ Two testability modes (XOR Tree and TRI-STATE ® device pins). ■ 5V tolerant and back-drive protected pins (except LPC bus pins) ■ 48-pin LQFP package LPC Bus South Bridge TPM Portable PlatformI/O Ports EC Serial Interface WPCN381U FIR/Serial Interface (WPC876xL)(WPCT200) System Block Diagram

www.winbond.com 2 Revision 1.0 WPCN381U

Features

■ Fast Infrared Port (FIR) — Software compatible with the 16550A and the 16450 — Shadow register support for write-only bit monitoring — FIR IrDA 1.1 compliant — HP-SIR — ASK-IR option of SHARP-IR — DASK-IR option of SHARP-IR — Consumer Remote Control supports RC-5, RC-6, NEC, RCA and RECS 80 — DMA support: one or two channels ■ Two Serial Ports (SP1 and SP2) — SP2 can be used only when FIR is not needed — Software compatible with the 16550A and the 16450 — Shadow register support for write-only bit monitoring — UART data rates up to 1.5 Mbaud ■ 11 General-Purpose I/O (GPIO) Ports — Supports IRQ assertion — Programmable drive type for each output pin (open- drain, push-pull or output disable) — Programmable option for internal pull-up resistor on each input pin — Output lock option — Input debounce mechanism ■ LPC System Interface — 8-bit I/O cycles — LPCPD and CLKRUN support — Implements PCI mobile design guide recommenda- tion (PCI Mobile Design Guide 1.1, Dec. 18, 1998) ■ PC2001 and ACPI 3.0 Compliant — PnP Configuration Register structure — Flexible resource allocation for all logical devices ❏ Relocatable base address ❏ 15 IRQ routing options ❏ Optional 8-bit DMA channels (where applicable) selected from four possible DMA channels ■ Clock Sources — 14.318 MHz or 48 MHz clock input — LPC clock, 0 or 30 MHz to 33 MHz ■ Strap Configuration — Base Address (BADDR) strap to determine the base address of the Index-Data register pair — Strap Inputs to select testability mode ■ Power Supply — 3.3V supply operation — All pins are 5V tolerant, except LPC bus pins — All pins are back-drive protected, except LPC bus pins ■ Testability — XOR Tree — TRI-STATE device pins Internal Block Diagram FIR Port/ Serial Port Bus Interface LPC Interface I/O Serial Port Serial Interface GPIO Ports Ports

14.31818 MHz

48 MHz

WPCN381U Legacy-Reduced SuperI/O with Fast Infrared Port, Two Serial Ports and GPIOs www.winbond.com Physical Dimensions All dimensions are in millimeters Important Notice Winbond products are not designed, intended, authorized or warranted for use as components in systems or equipment intended for surgical implantation, atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, or for other applications intended to support or sustain life. Furthermore, Win- bond products are not intended for applications wherein failure of Winbond products could result or lead to a situation wherein personal injury, death or severe property or environmental damage could occur. Winbond customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Winbond for any damages resulting from such improper use or sales. Please note that all data and specifications are subject to change without notice. All the trademarks of products and companies mentioned in this datasheet belong to their respective owners. Headquarters No. 4, Creation Rd. III, Science-Based Industrial Park, Hsinchu, Taiwan TEL: 886-3-5770066 FAX: 886-3-5665577 http://www.winbond.com.tw/ Winbond Electronics Corporation America

2727 North First Street, San Jose,

CA 95134, U.S.A. TEL: 1-408-9436666 FAX: 1-408-5441798 Winbond Electronics (Shanghai) Ltd. 27F, 2299 Yan An W. Rd. Shanghai,

200336 China

TEL: 86-21-62365999 FAX: 86-21-62365998 Taipei Office 9F, No.480, Rueiguang Rd., Neihu District, Taipei, 114, Taiwan, R.O.C. TEL: 886-2-8177-7168 FAX: 886-2-8751-3579 Winbond Electronics Corporation Japan 7F Daini-ueno BLDG, 3-7-18 Shinyokohama Kohoku-ku, Yokohama, 222-0033 TEL: 81-45-4781881 FAX: 81-45-4781800 Winbond Electronics (H.K.) Ltd. Unit 9-15, 22F, Millennium City, No. 378 Kwun Tong Rd., Kowloon, Hong Kong TEL: 852-27513100 FAX: 852-27552064 For Advanced PC Product Line information contact: APC.Support@winbond.com 48-Pin Low-Profile Plastic Quad Flatpack (LQFP) Order Number WPCN381U_0DG (Replace “_” with chip revision: A, B, and so on)