WAS530M12BM3

WAS530M12BM3 WOLFSPEED | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 12

Technical content

Rev. 3, March 2025 © 2025 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. WAS530M12BM3, WAS530M12BM3T

1200 V, 530 A, Silicon Carbide, Half-Bridge Module

• Industry Standard 62 mm Footprint
• High Humidity Operation THB-80 (HV-H3TRB)
• Ultra Low Loss, High-Frequency Operation
• Zero Reverse Recovery from Diodes
• Zero Turn-off Tail Current from MOSFET
• Normally-off, Fail-safe Device Operation
• Copper Baseplate and Aluminum Nitride Insulator

Applications

• Induction Heating
• Motor Drives
• Renewables
• Railway Auxiliary & Traction
• EV Fast Charging
• UPS and SMPS VDS 1200 V IDS 530 A System Benefits
• 62 mm Form Factor Enables System Retrofit
• Increased System Efficiency, due to Low Switching & Conduction Losses of SiC Parameter Symbol Min. Typ. Max. Unit Conditions Note Drain-Source Voltage VDS 1200 V TC = 25 °C Gate-Source Voltage, Maximum Value VGS(max) -10 +23 Transient Note 1 Fig. 33Gate-Source Voltage, Recommended VGS(op) -4/+15 Static DC Continuous Drain Current ID 630 A VGS = 15 V, TC = 25 °C, TVJ ≤ 175 °C Notes 2, 3, 4 Fig. 21

484 VGS = 15 V, TC = 90 °C, TVJ ≤ 175 °C

DC Source-Drain Current (Schottky Diode) ISD(SD) 632 VGS = -4 V, TC = 25 °C, TVJ ≤ 175 °C Pulsed Drain-Source Current IDM 1060 tPmax limited by TVJmax VGS = 15 V, TC = 25 °C Power Dissipation PD 2000 W TC = 25 °C, TVJ ≤ 175 °C Note 5 Fig. 21 Virtual Junction Temperature TVJ(op) -40 150 Operation

175 Intermittent with Reduced Life

Note (1): Recommended turn-on gate voltage is 15 V with ±5 % regulation tolerance. Not for use in linear region. Note (2): Current limit at TC = 25 °C imposed by package Note (3): Current limit at TC = 90 °C calculated by ID(max) = √(PD/RDS(typ)(TVJ(max),ID(max))) Note (4): Verified by design Note (5): PD = (TVJ - TC)/RTH(JC,typ)

WAS530M12BM3, WAS530M12BM3T 2 Rev. 3, March 2025 © 2025 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. MOSFET Characteristics (Per Position) (TVJ = 25 °C Unless Otherwise Specified) Parameter Symbol Min. Typ. Max. Unit Conditions Note Drain-Source Breakdown Voltage V(BR)DSS 1200 V VGS = 0 V, TVJ = -40 °C Gate Threshold Voltage VGS(th) 1.8 2.5 3.6 VDS = VGS, ID = 127 mA

2.0 VDS = VGS, ID = 127 mA, TVJ = 175 °C

Zero Gate Voltage Drain Current IDSS 12.8 1692 μA VGS = 0 V, VDS = 1200 V Gate-Source Leakage Current IGSS 60 600 nA VGS = 15 V, VDS = 0 V Drain-Source On-State Resistance (Devices Only) RDS(on) 2.67 3.47 mΩ VGS = 15 V, ID = 530 A Fig. 2 Fig. 34.30 VGS = 15 V, ID = 530 A, TVJ = 150 °C Transconductance gfs 449 S VDS = 20 V, ID = 530 A Fig. 4

418 VDS = 20 V, ID = 530 A, TVJ = 150 °C

Turn-On Switching Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 150 °C EON 6.6 6.0 6.0 mJ VDD = 600 V, ID = 530 A, VGS = -4 V/15 V, RG(OFF) = 0.5 Ω, RG(ON) = 0.5 Ω, L = 13.6 μH Fig. 11 Fig. 13Turn-Off Switching Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 150 °C EOFF 8.9 9.0 9.0 Internal Gate Resistance RG(int) 1.68 Ω f = 100 kHz, VAC = 25 mV Input Capacitance Ciss 38.9 nF VGS = 0 V, VDS = 800 V, VAC = 25 mV, f = 100 kHz Fig. 9Output Capacitance Coss 2.6 Reverse Transfer Capacitance Crss 48.5 pF Gate to Source Charge QGS 384 nC VDS = 800 V, VGS = -4 V/15 V, ID = 530 A, Per IEC60747-8-4 pg 21 Gate to Drain Charge QGD 462 Total Gate Charge QG 1362 FET Thermal Resistance, Junction to Case Rth JC 0.075 °C/W Fig. 17 Diode Characteristics (Per Position) (TVJ = 25 °C Unless Otherwise Specified) Parameter Symbol Min. Typ. Max. Unit Conditions Note Diode Forward Voltage VF 2.0 V VGS = -4 V, IF = 530 A, TVJ = 25 °C Fig. 7

2.6 VGS = -4 V, IF = 530 A, TVJ = 150 °C

Reverse Recovery Time tRR 25.5 ns VGS = -4 V, ISD = 530 A, VR = 800 V di/dt = 18.0 A/ns, TVJ = 150 °C Fig. 32Reverse Recovery Charge QRR 4.8 μC Peak Reverse Recovery Current IRRM 324 A Reverse Recovery Energy, TVJ = 25 °C TVJ = 125 °C TVJ = 150 °C ERR 1.9 2.2 2.2 mJ VDS = 600 V, ID = 530 A, VGS = -4 V/15 V, RG(ext) = 0.5 Ω, L = 13.6 μH Fig. 14 Note 6 Diode Thermal Resistance, JCT . to Case Rth JC 0.078 °C/W Fig. 18 Note (6): SiC Schottky diodes do not have reverse recovery energy but still contribute capacitive energy

WAS530M12BM3, WAS530M12BM3T 3 Rev. 3, March 2025 © 2025 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Module Physical Characteristics Parameter Symbol Min. Typ. Max. Unit Conditions Package Resistance, M1 (High-Side) R3-1 0.90 mΩ TC = 25 °C, ISD = 530 A, Note 7

1.26 TC = 125 °C, ISD = 530 A, Note 7

Package Resistance, M2 (Low-Side) R1-2

0.97 TC = 25 °C, ISD = 530 A, Note 7

1.36 TC = 125 °C, ISD = 530 A, Note 7

Stray Inductance LStray 11.1 nH Between DC- and DC+, f = 10 MHz Case Temperature TC -40 125 °C Mounting Torque MS 4 5 5.5 N-m Baseplate, M6-1.0 Bolts 4 5 5.5 Power Terminals, M6-1.0 Bolts Weight W 300 g Case Isolation Voltage Visol 5 kV AC, 50 Hz, 1 minute Clearance Distance mm Terminal to Terminal

30 Terminal to Baseplate

30 Terminal to Terminal

40 Terminal to Baseplate

Note (7): Total Effective Resistance (Per Switch Position) = MOSFET RDS(on) + Switch Position Package Resistance

WAS530M12BM3, WAS530M12BM3T 10 Rev. 3, March 2025 © 2025 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Schematic and Pin Out Package Dimension (mm) D D C C B B A A Mid WAS530M12BM3 HA2103-A010

WAS530M12BM3, WAS530M12BM3T 11 Rev. 3, March 2025 © 2025 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Supporting Links & Tools Product Ordering Code Part Number Description WAS530M12BM3 Without Pre-Applied Phase Change Thermal Interface Material WAS530M12BM3T With Pre-Applied Phase Change Thermal Interface Material Simulation Tools & Support

• All L TSpice Models
• All PLECS Models
• SpeedFit 2.0 Design Simulator™
• Technical Support Forum Compatible Evaluation Hardware
• CGD1200HB2P-BM3: Dual Channel Differential Isolated Half Bridge Gate Driver Board
• KIT-CRD-CIL12N-BM: Dynamic Performance Evaluation Board for the BM2 and BM3 Module
• CGD1700HB2P-BM3: Evaluation Gate Driver Tool Optimized for the 1700 V BM3 Power Modules
• KIT-CRD-CIL17N-BM: Dynamic Characterization Evaluation Tool Optimized for 1700 V BM Power Modules
• CGD12HB00D: Differential Transceiver Daughter Board Companion Tool for Differential Gate Drivers Application Notes
• PRD-07933: Wolfspeed Power Module Thermal Interface Material Application User Guide
• PRD-06379: Environmental Considerations for Power Electronics
• PRD-08710: Measuring Stray Inductance in Power Electronic Systems
• PRD-07845: Power Module Baseplate Capacitance and Electromagnetic Compatibility
• PRD-08376: Thermal Characterization Methods and Applications
• PRD-06933: Capacitance Ratio and Parasitic Turn-On

WAS530M12BM3, WAS530M12BM3T 12 Rev. 3, March 2025 © 2025 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. © 2025 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. PATENT: https://www.wolfspeed.com/legal/patents The information in this document is subject to change without notice. Contact info:

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.wolfspeed.com/power Notes & Disclaimers WOLFSPEED PROVIDES TECHNICAL AND RELIABILITY DATA, DESIGN RESOURCES, APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, AND OTHER RESOURCES “AS IS” AND WITH ALL FAUL TS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, WITH RESPECT THERETO, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, SUITABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD- PARTY INTELLECTUAL PROPERTY RIGHTS. This document and the information contained herein are subject to change without notice. Any such change shall be evidenced by the publication of an updated version of this document by Wolfspeed. No communication from any employee or agent of Wolfspeed or any third party shall effect an amendment or modification of this document. No responsibility is assumed by Wolfspeed for any infringement of patents or other rights of third parties which may result from use of the information contained herein. No license is granted by implication or otherwise under any patent or patent rights of Wolfspeed. The information contained in this document (excluding examples, as well as figures or values that are labeled as “typical”) constitutes Wolfspeed’s sole published specifications for the subject product. “Typical” parameters are the average values expected by Wolfspeed in large quantities and are provided for informational purposes only. Any examples provided herein have not been produced under conditions intended to replicate any specific end use. Product performance can and does vary due to a number of factors. This product has not been designed or tested for use in, and is not intended for use in, any application in which failure of the product would reasonably be expected to cause death, personal injury, or property damage. For purposes of (but without limiting) the foregoing, this product is not designed, intended, or authorized for use as a critical component in equipment implanted into the human body, life-support machines, cardiac defibrillators, and similar emergency medical equipment; air traffic control systems; or equipment used in the planning, construction, maintenance, or operation of nuclear facilities. Notwithstanding any application-specific information, guidance, assistance, or support that Wolfspeed may provide, the buyer of this product is solely responsible for determining the suitability of this product for the buyer’s purposes, including without limitation (1) selecting the appropriate Wolfspeed products for the buyer’s application, (2) designing, validating, and testing the buyer’s application, and (3) ensuring the buyer’s application meets applicable standards and any other legal, regulatory, and safety-related requirements. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Wolfspeed representative or from the Product Documentation sections of www.wolfspeed.com. REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact your Wolfspeed representative to ensure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request.