DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

WIREWOUND TYPE COMMON MODE FILTER 1. PART NO. EXPRESSION : W3NL670-RD-10 (a) Series code (e) R: Tape & Reel (aXb) (c) (d) — (eXf) (9). (b) Dimension code (f) Current code : D = 400mA (c) Material code (g) 10 : RoHS Compliant (d) Impedance code : 670 = 670 2. CONFIGURATION & DIMENSIONS : Cra HOLE | ren ee ia —— 5 ey TA Ch | a gor

4 A |

“od ~ I-— GI— aPC |=] lol Dt PCB Pattern Unit:m/m Pete tetoteteatete]e| 3. SCHEMATIC : © a000s~ ® @ LOTTO) _, ® 4, MATERIALS : @ (a) Upper Plate | A (b) Core AMIN — a © (d) Wire Jc ° RoHS Compliant NOTE : Specifications subject to change without notice. Please check our website for latest information. 12.06.2015 @) SUPERWORLD ELECTRONICS (S) PTE LTD PG.1

  1. GENERAL SPECIFICATION : a) Operating temp. : -40°C to +105°C. b) Storage temp. : -40°C to +105°C. 6. ELECTRICAL CHARACTERISTICS : Common mode Test DCR | Rated Current | Rated Volt. | Withstand Volt. | IR Impedance | ‘Frequency (9) (mA) (Vde ) (Vde ) (Q) 7. CHARACTERISTICS CURVES : W3NL670-RD-10 W3NL900-RD-10 Se fet et vo Nil meee ered eee ements 2 wo both Co PrN = go Le satin cilia Feet Let Se cl Fp co AN | al FS a aS Se === = SSS Soe SS SSS SS SSS asa siiliceeseaiiil oe se siillieemaiii am iii oom ito i i ooo non ” 1 0 100 1000 ‘yoo00 " bal baad — — FREQUENCY(MHz) FREQUENCY (MHz) W3NL121-RC-10 W3NL181-RC-10 F solo LCS AW a 2 ee

3 ESS ae 3 ER hae

i Dees =| Treen treme oC F 9 CECE ron Porno 1 10 100 1000 10000 ‘ 0 100 1000 ‘000 FREQUENCY(MHz) FREQUENCY(MHZ) RoHS Compliant NOTE : Specifications subject to change without notice. Please check our website for latest information. 12.06.2015 Ny PG.2

  1. RELIABILITY & TEST CONDITION : ITEM PERFORMANCE TEST CONDITION Z (common mode) ‘Agilent-4291A+ Agilent -16197A Refer to standard electrical characteristics ist [is Temperature Rise Test Rated Current < 1A AT 20°CMax 1. Applied the allowed DC current. Rated Current = 1A AT 40°CMax 2. Temperature measured by digital surface thermometer. Mechanical Performance Test Solderabilty Test More than 95% of termincal electrode should _| Preheat: 150°C, 60sec. be covered with solder. Solder: $n99.5%-Cu0. 5% Temperature: 24545°C Flux for lead free: Rosin. 9.5% Dip time: 4#1sec Depth: completely cover the termination Temperature Number] Temperature | Time | ramp/immersion] of heat Solder Heat Resistance co) (| andemersion "| ces 260 a5 7 (solder temp) | 10#1 25mm/s#6 mms Appearance: No damage. Impedance: within#15% of initial value Depth: completely cover the termination. Terminal Strength Bee win ue “ inl value and shall not | conditioning : Run through IR reflow for 2 times exceed the specification value (IPC/JEDEC J-STD-020D Classification Reflow Profiles) With the component mounted on a PCB with the device to be tested, apply a force (>0805:1kg , <=0805:0.5kg)to the side of a device being tested. This force shall be applied for 60 +1 seconds. Also the force shall be applied gradually as not to apply a shock to the component being tested. radius 0,5 mm DUT wide i thickness substrate press tool shear force RoHS Compliant NOTE : Specifications subject to change without notice. Please check our website for latest information. 12.06.2015 x PG. 3
  1. RELIABILITY & TEST CONDITION : ITEM PERFORMANCE TEST CONDITION Reliabilty Test Life Test Preconditioning: Run through IR reflow for 2 times. (IPCIJEDEC J-STD-0200 Classification Reflow Profiles) Temperature : 852°C Applied Current : rated current Duration : 1000#12hrs Measured at room temperature after placing for 2442 hrs. Preconditioning: Run through IR reflow for 2 times. Thermal Shock ‘Appearance: No damage. (IPC/JEDEC J-STD-0200 Classification Reflow Profiles) Impedance: within 15% of initial value Temperature (°C) RDC: within £15% of initial value and shall not Number of cycles: 500 Measured at room femprature after placing for 24+2 hrs Humidity Resistance Test Preconditioning: Run through IR reflow for 2 times. (IPC/JEDEC J-STD-020D Classification Reflow Profiles) Temperature : 8542°C Humidity : 8522% RH Duration: 1000hrs Min. with 100% rated current Measured at room temperature after placing for 2442 hrs Vibration Test Preconditioning: Run through IR reflow for 2 times. (IPCIJEDEC J-STD-0200 Classification Reflow Profiles) Oscillation Frequency : 10~2K~10Hz for 20 minutes Equipment : Vibration checker Total Amplitude : 1.52mms10% Testing Time : 12 hours(20 minutes, 12 cycles each of 3 orientations). RoHS Compliant NOTE : Specifications subject to change without notice. Please check our website for latest information. 12.06.2015 . PG.4
  1. SOLDERING AND MOUNTING : 9-1. Soldering Mildly activated rosin fluxes are preferred. Our terminations are suitable for all wave and re-flow soldering systems. If hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools. 9-1.1 Solder Re-flow : Recommended temperature profiles for re-flow soldering in Figure 1 9-1.2 Soldering Iron (Figure 2) : Products attachment with a soldering iron is discouraged due to the inherent process control limitations. In the event that a soldering iron must be employed the following precautions are recommended. Note : a) Preheat circuit and products to 150°C d) 1.0mm tip diameter (max) b) 355°C tip temperature (max) e) Use a 20 watt soldering iron with tip diameter of 1.0mm c) Never contact the ceramic with the iron tip f) Limit soldering time to 4~5 sec. Preheating Soldering Natural Preheating Soldering Natural o cooling cooling ied e@ssrcr040s) | wy 3 [v4 ze =) zoo < é oy | L | & Ss 60-1806: g i 480 max. a Fs ia Time(sec.) mans i Reflow times: 3 times Max. Fig.t Iron Soldering times: 1 times max. Fig.2 RoHS Compliant NOTE : Specifications subject to change without notice. Please check our website for latest information. 12.06.2015 \\ PG.5

WIREWOUND TYPE COMMON MODE FILTER — W3NL SERIES 10. PACKAGING INFORMATION : 10-1. Reel Dimension tr . A Agi oe MS lH} Sty 205 135105 7" x 8mm 7" x 12mm RIOS R19 ROS 10-2 Tape Dimension / 8mm common feist 25808 .

3 L ~* = T

re oe ¢ 6/6 6 3 [U TA ml | pe wt pioeo.1 tt Section A-A 10-3. Packaing Quantity RoHS Compliant NOTE : Specifications subject to change without notice. Please check our website for latest information. 12.06.2015 i) SUPERWORLD ELECTRONICS (S) PTE LTD PG.6

  1. PACKAGING INFORMATION : 10-4. Tearing Off Force The force for tearing off cover tape is 15 to 80 grams F in the arrow direction under the following conditions. —“__ 165° to 180° Room Temp.| Room Humidity | Room atm | Tearing Speed Top cover tape (°C) (%) (hPa) (mm/min) Base tape Application Notice 1. Storage Conditions : To maintain the solderabililty of terminal electrodes : a) Temperature and humidity conditions: Less than 40°C and 60% RH. b) Recommended products should be used within 12 months from the time of delivery. c) The packaging material should be kept where no chlorine or sulfur exists in the air. 2. Transportation a) Products should be handled with care to avoid damage or contamination from perspiration and skin oils. b) The use of tweezers or vacuum pick up is strongly recommended for individual components. c) Bulk handling should ensure that abrasion and mechanical shock are minimized. RoHS Compliant NOTE : Specifications subject to change without notice. Please check our website for latest information. 12.06.2015 \\ PG.6