W2012F670-RD-10

W2012F500-RD-10 SUPERWORLD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

(a) (c) (b) (e) (d) 1. PART NO. EXPRESSION : (b) Dimension code (c) Material code (a) Series code 2. CONFIGURATION & DIMENSIONS : SUPERWORLD ELECTRONICS (S) PTE LTD 3. SCHEMATIC : (e) R : Tape & Reel (f) Rated Current : D = 400mA WIREWOUND TYPE COMMON MODE FILTER PG. 1 NOTE : Specifications subject to change without notice. Please check our website for latest information. 20.05.2014 Unit:m/m B C D1 D2 E W 2 0 1 2 F 6 7 0 - R D - □ □ A C B E D2D2 D1 D1 2.00 ± 0.2 A 1 2 (f) (d) Impedance code : 670 = 67Ω (g) PCB Pattern H L 1.20 Ref. 0.50 Ref. 1.20 Ref. H 2.60 Ref. L 4. MATERIALS : d a b c (g) 10: Standard 11 ~ 99 : Internal control number W2012 SERIES Side View Top View (a) Core (c ) Terminal (d ) Core (b) Wire

SUPERWORLD ELECTRONICS (S) PTE LTD 6. ELECTRICAL CHARACTERISTICS : b) Storage condition (component in its packaging) a) Operating temp. : -40° C to 125° C NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 2 20.05.2014 5. GENERAL SPECIFICATION : WIREWOUND TYPE COMMON MODE FILTER W2012F500-RD-10 50 ± 25% 100 0.25 50 400 125 100M Part No. Test (MHz) Frequency (Ω) Common mode Impedance Rated Voltage (Vdc)(mA)Max. DCR (Ω) Current Rated Min.(Vdc) Withstand Voltage IR (Ω) 100W2012F900-RD-10 90 ± 25% 50 0.30 400 125 100M W2012F670-RD-10 67 ± 25% 100 0.30 50 400 125 100M W2012 SERIES i) Temperature : -10 to 40° C ii) Humidity : 60%

NOTE : Specifications subject to change without notice. Please check our website for latest information. SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 20.05.2014 WIREWOUND TYPE COMMON MODE FILTER 7. CHARACTERISTICS CURVES : 1 10 100 1000 10000 FREQUENCY(MHz) 0.1 10 0 1000 HSF2 012F2SF-500T04 Common M ode Normal Mode W2012F500-RD-10 1 10 100 1000 10000 FREQUENCY(MHz) 0.1 10 0 1000 HSF2 012F2SF-670 Common M ode Normal Mode W2012F670-RD-10 1 10 100 1000 10000 FREQUENCY(MHz) 0.1 10 0 1000 HSF2 012F2SF-900 Common M ode Normal Mode W2012F900-RD-10 W2012 SERIES

NOTE : Specifications subject to change without notice. Please check our website for latest information. SUPERWORLD ELECTRONICS (S) PTE LTD PG. 4 20.05.2014 WIREWOUND TYPE COMMON MODE FILTER

7.1 Insertion Loss Test

NOTE : Specifications subject to change without notice. Please check our website for latest information. SUPERWORLD ELECTRONICS (S) PTE LTD PG. 5 20.05.2014 WIREWOUND TYPE COMMON MODE FILTER W2012F670-RD-10 W2012 SERIES

NOTE : Specifications subject to change without notice. Please check our website for latest information. SUPERWORLD ELECTRONICS (S) PTE LTD PG. 6 20.05.2014 WIREWOUND TYPE COMMON MODE FILTER W2012F900-RD-10 W2012 SERIES

SUPERWORLD ELECTRONICS (S) PTE LTD PG. 8 20.05.2014 NOTE : Specifications subject to change without notice. Please check our website for latest information. D1:1± 0.1 F:3.5± 0.05 P2:2± 0.05 P E:1.75± 0.1 Po:4± 0.1 W:8.0± 0.1 Bo Ko Section A- A AoA t A D:1.5+0.1 Series Ko(mm) 1.35± 0.10 Bo(mm) 2.25± 0.10 Ao(mm) 1.50± 0.10 P(mm) 4.0± 0.1 t(mm) 0.22± 0.05 D(mm) 178.0± 2.0 9-2 Tape Dimension / 8mm 7" x 8mm D C B R0.5R1.9 120° 7" x 12mm 2± 0.5 60.0± 2.0 R10.5 13.5± 0.5 Type A(mm) C(mm) B( mm) 9-1. Reel Dimension 9. PACKAGING INFORMATION : A W2012 9-3. Packing Quantity Carton Middle Box Chip / Reel Seri e s Inner Box 100000 50000 2000 10000 W2012 WIREWOUND TYPE COMMON MODE FILTER W2012 SERIES

SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 9 20.05.2014 WIREWOUND TYPE COMMON MODE FILTER 9-4. Tearing Off Force Base tape Top cover tape 165° to 180° F Tearing Speed in the arrow direction under the following conditions. The force for tearing off cover tape is 15 to 80 grams 45~855~35 860~1060 Room Humidity (° C) Room Temp. (%) (hPa) Room atm 300 (mm/min) W2012 SERIES a) Recommended products should be used within 12 months from the time of delivery. b) The packaging material should be kept where no chlorine or sulfur exists in the air. b) The use of tweezers or vacuum pick up is strongly recommended for individual components. c) Bulk handling should ensure that abrasion and mechanical shock are minimized. a) Products should be handled with care to avoid damage or contamination from perspiration and skin oils. To maintain the solderabililty of terminal electrodes : 1. Storage Conditions : Application Notice 2. Transportation :