W1225F-101K SUPERWORLD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Transponder Coil – W1225F Series NOTE: Specifications subject to change without notice. Please check our website for latest information. Proprietary and Confidential Document of Superworld 27/12/2017 1. Part No. Expression: W 1 2 2 5 F - 1 0 1 J (a) (b) (c) (d) (e) (a) Series Code (d) Inductance Code ( b ) D i m e n s i o n C o d e ( e ) T o l e r a n c e C o d e ( c ) M a t e r i a l C o d e 2. Configuration & Dimensions: 3. Material List: A B C D L G H Recommended PCB layout Unit: mm (a) Upper Plate (b) Core (c) Termination (d) Wire
Transponder Coil – W1225F Series NOTE: Specifications subject to change without notice. Please check our website for latest information. Proprietary and Confidential Document of Superworld 27/12/2017 4. General Specification: (a) Operating Temp. : -40°C to +125°C(Including self - temperature rise) (b) Storage Temp. : -40°C to +125°C (on board) (c) Humidity Range: 85 ± 2% RH (d) Storage Condition (Component in its packaging) i) Temperature: Less than 40°C ii) Humidity : 60% RH 5. Electrical Characteristics: Part Number Inductance (uH) Test Frequency (Hz) Q Min. DCR (Ω) Max. Rated Current (mA) Max. SRF (MHz) Min. W1225F-101K 100±10% 0.1V/125K 20 3.0 300 20 W1225F-232M 2300±20% 0.1V/125K 40 40 50 0.48 W1225F-492J 4900±5% 0.1V/125K 20 50 50 0.34 W1225F-722J 7200±5% 0.1V/125K 40 40 50 0.30
Transponder Coil – W1225F Series NOTE: Specifications subject to change without notice. Please check our website for latest information. Proprietary and Confidential Document of Superworld 27/12/2017 6. Characteristics Curves: W1225F-101K W1225F-101K W1225F-232M W1225F-232M W1225F-492J W1225F-492J
Transponder Coil – W1225F Series NOTE: Specifications subject to change without notice. Please check our website for latest information. Proprietary and Confidential Document of Superworld 27/12/2017 7. Soldering: 7-1. Attention regarding P.C.B. bending The following shall be considered when designing P.C.B.’S (a)P.C.B. shall be designed so that products are not subjected to the mechanical stress for board warpage. (b) Products location on P.C.B. Products (A,B,C,D) shall be located carefully to prevent mechanical stress when warping the board. Products may be subjected to the mechanical ≒stress in the order of A>C>B D. 7-2. Soldering Mildly activated rosin fluxes are preferred. Our terminations are suitable for all re-flow soldering systems. If hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools. 7-2.1 Solder Re-flow Recommended temperature profiles for re-flow soldering in Figure 1. Products shall be located in the sideways direction (Length:a<b) to against the mechanical stress. W1225F-722J W1225F-722J
Transponder Coil – W1225F Series NOTE: Specifications subject to change without notice. Please check our website for latest information. Proprietary and Confidential Document of Superworld 27/12/2017 8. Packaging Information: 8-1 Reel Dimension 8-2 Tape Dimension Type A(mm) B(mm) C(mm) D(mm) Size W(mm) P(mm) E(mm) F(mm) P2(mm) D(mm) W1225F P0(mm) Ao(mm) Bo(mm) Ko(mm) t(mm) C D 2.0±0.5 EMBOSSED CARRIER B A COVER TAPE
Transponder Coil – W1225F Series NOTE: Specifications subject to change without notice. Please check our website for latest information. Proprietary and Confidential Document of Superworld 27/12/2017 8-3 Packaging Quantity Chip Size W1225F Chip/Reel 1,000 8-4 Tearing Off Force Application Notice: 1. Storage Conditions: To maintain the solderability of terminal electrodes: a) Recommended products should be used wi thin 12 months from the time of delivery. b) The packaging material should be kept wh ere no chlorine or sulfur exists in the air. 2. Transportation: a) Products should be handled with care to avoi d damage or contamination from perspiration and skin oils. b) Vacuum pick up is strongly recommended for individual components. c) Bulk handling should ensure that abrasion and mechanical shock are minimized. The force for tearing off cover tape is 10 to 80 grams in the arrow direction under the following conditions. Room Temp. (℃) Room Humidity (%) Room atm (hPa) Tearing Speed mm/min 5~35 45~85 860~1060 300